I have an external hard drive, can I set a password on this? The drive is already populated with data

ITs an old Iomega 100gb external HD that has about 90gb of music on it. The Macbook has a 500gb HD. I would like to put the iTunes library on the internal HD so I have room to expand.
Phil0124 wrote:
You can copy it to the internal hard drive as long as it fits on it. How big is your library, and how big is your internal HD?
The only thing you do not want to do is over-stuff the internal hard drive. The OS needs some space to operate correctly, so if your iTunes library uses up more than say 80 to 85% of the internal HD's available space it may not be a good idea to transfer it over.
With that said, the internal HD will provide slightly faster access to the library than the external would, but other than that, you can point iTunes to the external drive just fine.

Similar Messages

I need to split my iPhoto. I have a new external hard drive - can I just drag Photo events into the drive?

I need to move events from my iPhoto to a new external hard drive. Can I just drag events into the hard drive?

No.
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

Can I set a password for clearing the history?

I want to have a password set when deleting the history so I can track what is being used on my computer. Either that or hide were the history button is located

You are better off using Parental controls or setting a content monitoring program, as there are plenty of ways to work around any limits you might set in the browser itself (someone can use another browser, use that browser safe mode, etc.) [[Block and unblock websites with parental controls]]

Can I set a password so that the keyboard will be locked on the Bold

Solved!
Go to Solution.

Options, Security, general Settings. Enable password and type in what you want and follow the prompts.
If I successfully help you with an issue, thank you for clicking "kudos" in my post.
If your issue has been solved, please resolve this thread by marking the post which solved it for you!

I have an external hard drive, from Iomega. However, I cannot copy or save any file to it. On my PC it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?

I have an external hard drive, from Iomega. that I can open and see my files. However, I cannot copy or save any file to it. On my PC I have it says that is possible to read and write in it, but in my Mac, it says I can only read. can somebody help me?
Also, Im a photographer, so I like to name a lot of files at the same time (used to do in on PC and it was very usefull.) cannot find out how to do it on my Mac. Really appretiate if some one can give me a solution! Thanx

Your drive is formatted with the NTFS file system. OS X can read but not write to the NTFS file system. There are third party drivers available that claim to add the ability to OS X to write to an NTFS partition. I have not tried them and don't know if they work.
The only file system that OS X and Windows can both write to natively is the FAT32 file system.

I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well??

I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well?? plzz help
Merry Christmas

Repartition and format the drive for a Mac:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

HT201250 I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

My drive collapsed. I have an external hard drive. How can I put all my files there, using disk utility?

So my MacBook Pro collapsed one day, and it turns on but only "Restarts" and shuts itself down on the procesa. The only thing I have access to is that 'Command + R' thing. There I tried "Verifying" and "Reparing" the Diak but the message of "Cant repair disk backup as many files as possible, reformat the disk and restore" popped up. So I have am external hard drive with more than enough space to put all of my files in there. my question is: HOW DO I DO THAT? from disk utility. Can somone please help me? Please! Step by step cause ptherwise I will mess it up and I really dont want to lose all the memories I have in my computer.

After you restart so you have access to Disk Utility, with the external drive connected, choose the external drive from the left sidebar of the DU window. If the drive has not been formatted for the Mac, choose Partition from the buttons top center of the main window. Give the drive a name, you can leave it as one partition if you like, make sure the format is set as Mac OS X Extended (Journaled), and the partition table is GUID. Then Apply and acknowledge that you know this will erase the disk.
Then go to the button that says Restore. Drag and drop the internal drive, Macintosh HD is most common, to the Source box, and drag and drop the external drive to Destination box. Then Restore.
That will create a clone of the internal and that will be a bootable clone.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. Help.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

I run an itune 10.4 and would like to back up my entire library to a DVD, because I do not have an external hard drive to back it up to (as the "help" topic is sugesting). Is it possible and if so, can someone help me please.

I run an itune 10.4 and would like to back up my entire library to a DVD, because I do not have an external hard drive to back it up to (as the "help" topic is suggesting). Is it possible?...and if so, can someone help me please.

This is no longer done via iTunes.
Use whatever CD/DVD burner software is installed on your computer.
Add the iTunes media folder to the list of files/folders to burn to disc.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all. Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac, so I hope somebody can give me some advice.
Cheers

if it's ntfs microsofts filesystem then you need a windows machine to recover them

I am new to a MAC. I have an external hard drive that I used with my Windows XP computer. Can I reformat it

I am new to MAC. I have an external hard drive that I used with my former computer running Windows XP. Can I reformat it to use with my new MAC? If so, how do I do it?

Yes you can. See the following:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

I have an external hard drive which has my i-photo on it & some movies from i-movie that I have on disk now. But for some reason my ehd has a caution symbol on it & I can't move my event to free up space on my hd so that I can export i-movie events. Help!

I have an external hard drive which has my i-photo on it & some movies from i-movie that I have on disk now. But for some reason my ehd has a caution symbol on it & I can't move my event to free up space on my hd so that I can export i-movie events. Help!

Usually the caution symbol means that it's formatted as a PC compatible format like NTFS or most likely FAT32. For iMovie to use it the ehd must be formatted Mac OS Extended. Then iMovie will show it without the caution symbol and you can drag/drop open any Event/Project from that hard drive.
To find out if it's formatted as PC:
Go to the desktop, holding down the Control key click on that ehd and in the pop-menu choose 'Get Info'
Under Format: It will say whether or not it's Mac OS Extended (Journaled). The only way to undo a PC formatted ehd would be to copy everything off of it first, Erase/Format the drive using Disk Utility in the Applications>Utilities folder on your Mac, choosing the Mac OS Extended (Journaled) format in the pull-down menu there.

I have an external hard drive, can I set a password on this? The drive is already populated with data

Similar Messages

Maybe you are looking for