I have an HP C309a all in one Photosmart. When I go to print on a Printable CD It only prints on 1/2

I have an HP C309a all in one Photosmart. When I go to print on a Printable CD. It only prints on 1/2 Right side of disk. Why?
I am using PS23 and used the label format for making the copy I wanted to print on printable disk.
Herman

HI,
You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Have installed my 7200 all in one on my network, however my new hp laptop can not find the printer

    I have a 7200 printer installed in my network, however my new HP laptop can not find it. CD will not work with windows 7, download from HP site did not help. have also tried using IP address to find the printer to no avail ?

    There are some Updates on this page.  Have you tried them?
    Also, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a C309a All in One, how do I use the CD/DVD component to print on a CD?

    PRODUCT/SYSTEM: C309a All in One Printer; Windows 7 64-bit;

    Hi,
    It's a bit long story, page #39 of the following document shows you all:
     http://h10032.www1.hp.com/ctg/Manual/c01659847.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • First - unable to print; then - printer says wireless is failing. HP C309a All-in-One, Win7

    About 1-week ago, the printer started to not print.  when checking it, a message tells me to remove USB device when there in nothing plugged in to the USB port.  Rebooting would often have the same message right away, other times I would have to wait a while before the message showed up. 
    Now, after running wireless testing, the printed report says "The wireless radio is not functioning. Contact HP support."
    This is an HP C309a All-in-One, and my laptop is an HP running Win7(x64).

    Your printer's wireless radio has died.  This is how to contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors, there is a phone number on the resulting page).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a HP 3055 all in one attached to a wireless print server. I got in working on one laptop Win7

    I have a HPa  3055 all in one attached to a wireless print server that works with one Dell laptop that I upgraded from XP. But I can't get a New Toshiba Win7 to work wireless, but only with cable.

    Do you have a wireless router?  How is the print server configured with that?
    On the Win7 machine, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a hp C410 all-in-one series printer.  When I updated to 10.8.1 it was no longer supported.  HP told me to go to the Apple system updates and download an installation program.  I can't find that program in my Apple updates file.

    I have a hp C410 all-in-one series printer.  When I updated to 10.8.1 it was no longer supported.  HP told me to go to the Apple system updates and download an installation program update.  I can't find that program in my Apple updates file.  Please help.

    From the HP Support site, this may help:)
    "Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
    Options 
    08-10-2012 10:54 AM
    Download and install this: http://support.apple.com/kb/DL907
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
    Hope this helps

  • Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error.

    Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error stating please insert black ink cartridge.
    Please Help

    Make sure it is a genuine HP cartridge.  Take it out and clean the contact on the cartridge and in the printer.  Try again.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers.  I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

    I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers.  I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

    [discussion moved to Using Flash Player  forum]

  • I have an HP C6300 All In One Printer (wireless). It is always going "Off-line".

    We have an HP C6300 All In One Printer that is wireless. We try and set the Properties on the laptops to "Use Off-Line" but that does not help. At points some of the laptops work and some don't. Now none of the computers can print. I have unplugged the printer and re-assigned it to my wireless network and nothing is working. we are out of warranty so I would have to pay for any tech support which is probably more than the printer cost, so if I cannot solve this I am getting rid of this printer!!

    HI,
    You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

    Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

    HI,
    You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • I have a HP 6510 All in One printer Model # CQ761A. It does not respond to touching the screen

    I have a HP 6510 All in One printer Model # CQ761A. Using Windows XP.
    Power light is on and wireless light is on. When I touch the touch screen there is no response from the printer. The computer and network does not see the printer and power button will not power down the printer. I have to unplug the power from the printer to get it to turn off then on and start working. Works fine for a day or two then back to malfunctioning.

    Try working through this support document. it walks through resetting the power module and testing it. It also includes a video which is very helpful.
    The HP Product Won't Turn On or Respond
    If this does not resolve your issue post back so we can get it fixed for you.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

    İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

    Hello,
    Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    If that does not help, let me know and I will see what I can do.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I have a officejet j4580 all-in-one and i have lost the cd how can i set up my laptop?

    i have a officejet j4580 all-in-one and i have lost the cd how can i set up my laptop?
    This question was solved.
    View Solution.

    Hi justine28,
    Click on the link below to download the software and drivers for your printer.
    HP Officejet J4580 All-in-One Printer Drivers - Select your operating system
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • I have a psc 2175 all-in-one that seems to have a bound up (or stuck) scanner/copier bar assembly

    please help me, i have a psc 2175 all-in-one & it seems to have a bound up (or stuck) scanner/copier bar assembly. it keeps make a repetitive noise as if it is trying to move but it only moves about half an inch & goes back & tries to do it again & again. i can't afford a new printer at the moment & i really need to copy a couple of forms before i have to work in the a.m.- thx in advance.

    Hi - Try the steps in this document.  Specifically, you might try solution 3 first.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • I have a hp 310 all in one from left to right it only prints 1/3

    i have a hp 310 all in one printer and from left to right it only prints 1/3 of the page 

    Hi for49erdan,
    Is your printer a Deskjet 310?
    What are the ink levels ( in % full ) for each cartridge according to the printer?
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

Maybe you are looking for

  • Shopping through catalog

    Hi all, When i am Shopping through catalogue, an HTML page get displayed. When i Filled the details and click in OK button.the data from HTML get transfeerd to SRM, and a line item gets created. Problem is: on clicking on OK some time 2 line items ge

  • Bank account lines of credit

    Everytime I sign into my bank account it asks me if I want a credit line in order to avoid bounced checks etc. If I check yes to this will it result in a HP? Also, does this show up on my credit report as a line of credit similiar to a credit card?

  • How would you use Aperture 3 Labels & Flags in your workflow?

    Now that A3 has the ability to use Labels & Flags, I'm trying to incorporate their use into my workflow but am struggling to find the most effective way. I've used the star rating for selections & refining the selections. In A2 I used keywords on ima

  • I can't combine the files in speedgrade

    I'm graded already in sg but i don't know how to do next with this. I watch this video to render file  http://www.youtube.com/watch?v=gDx03q6p_rY whem i renderd i go to my folder to see but it be like this??? what is dpx file and how can i combine in

  • I have Internet Explorer and the latest Adobe Flash Player.  Do I need ActiveX or Google Chrome Opti

    I have Internet Explorer and Adobe Flash Player's latest version.  I get a blankk spot for some ads, etc.  Do I need ActiveX or Google Chrome Optional to get the video that is now black box?