I have an HP Photosmart Premium --Windows op system. Error message: cannot connect to network.
Printer worked for awhile --then would not but if I unplugged it and replugged it then it would work. Now I get an error message saying it can't connect to network. How do I fix this.
Hello Steve,
Thank you for the details of the issue you are experiencing with the iTunes Store. I recommend the following steps for error (-3212):
"Error 3000" through "3999"
Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
Find the full article at the following link:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?
Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store. Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
Rob -
i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!
Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off. -
CM1312 NFP: WIndows 7: USB Error message ~"Lost Connection"
With the 1312 connected to my Windwos 7 desktop, periodically Windows gives an error message that indicates that it has lost connection to the printer. Unplugging and replugging the USB cable fixes the problem. Otherwise the print & scan functions work perfectly. Symptomatically it appears as if the printer goes to sleep and stops responding to whatever "keep alive" messages Windows might be sending. Is there a setting in the printer, in Windows or in the printer driver software that can prevent this message?
BTW, the other way to work around this problem is to just access the printer via the Ethernet but the scan funciton is not accessible via the network (an unfortunate limitation).aluniewski,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Windows - No Disk error message when connecting Ipod to computer
I recently connected my Ipod to the Computer as I have done for the last year and I am now getting an error message reading: "Windows - No Disk". It then asks me to insert a disk. I cannot cancel out, continue or retry which are the three choices. I eventually have to Ctrl + Alt + Del to close out Itunes. Can anyone help? Thank You.
Dell XPS Windows 2000I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.
-
Can anyone please suggest a solution. Thanks
A user account specific issue like this has me wondering if there's an issue with the iTunes preference files in your son's Windows user account, renee. (There's a different set of those in each different account. So a preference file issue can cause trouble in one user account but not another.)
Even if you're not getting a -50, perhaps try the following document:
[iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store|http://support.apple.com/kb/TS3288]
(Adjusting the Parental control preferences should be done inside your son's Windows user account. The command line technique can be done from within either account.) -
Have a HP Photosmart Premium C310a printer, copier,scanner problem
Have a HP Photosmart Premium C310a printer, copier,scanner problem
When I try to scan it asks me for destination, PC or SD card, when you select PC it tells me to iniciate from the computer.
The printer was installed with the 3100 series drivers. i have no icons to inicate from the PC. I have downloaded an ran PS_AIO_07_C310_FSW_Full_Win_enu_140_246 which is supposed to be the correct software and drivers for this printer. When I process this application, there is no termination. It asks if I want to let it make changes to this computer, runs for a while and then disappers from active processes. Acts like nothing really terminated or even ran.
Printing and copying works perfect, only problem is with scanning. I have used the workaround of going to the printers IP address but this does not allow multipage scans.
i have windows 7 Home Preimum Service Pack 1 64bit operating system using Chrome as the browser. Printer is being used as wireless.Hello keller123,
I see that this is your first time with us on the HP Forums. Please let me take a moment to say "Welcome".
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some issues when it comes to scanning.
I suggest that you attempt to use the HP Scan software. Please click on Start and go to All Programs. Scroll down the menu until you see a Yellow HP folder. In the Folder you will see your printer listed. Click on the printer and you will then see HP Scan.
If this does not resolve your issue, please write me back.
If I don't hear from you today, I hope the remainder of your Wednesday is a good one.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I have a hp photosmart premium c310. my printer works fine but i am having problems scanning.
I have a hp photosmart premium C310. I can print no problem but have recently tried to scan a document. I received the message 'Try starting scan from computer. Refer to documentation details'. This prompted me to look for the relevent file in order to scan from computer and it appears that the HP Solutions Centre has not downloaded properly. I have tried to reinstall software but each time the installation stops before it is completed. This appears on screen:
System check complete (Tick)
System preparation complete (Tick)
Installing software … configure product (Tick)
Installing item 7 of 7: Microsoft toolbar customized for HP ( at this point the program fails to complete installation)
Any help greatly appreciated.
ps I am using Windows 7 64 btriab, follow the link below and try using the full-feature software and drivers. I would be sure that before you do this that the printer is completely uninstalled and removed from your computer. Check in Programs and Features, Device Manager, and Devices and Printers.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=18972&prod...
Let me know if this helps! -
i have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????
So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst. -
I have a C309g Photosmart Premium All-in-One printer that the paper transport mechanism rumbles
My computer operating system is Windows XP
An error message "Remove Paper Jam" occurs when I am trying to print even when there is no paper in the printer. It also rumbles as it scans a document to the computer but it takes almost 3 times longer than normal to scan. I have checked the printer and duplexer for a paper and they are clean.
Nothing was changed to the computer, printer or operating system.
It sounds to me like the gear bearings need lubricating.Hi,
HP has an HP Hardware Diagnostic Utility that might help resolve the issue you are having. Here is the link to download the utility.
HP Hardware Diagnostic Utility
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP -
iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect" yet my computer is connected with a strong signal. I checked to make sure IE is not off line. Any suggestions please?
Try using a different browser as a test.
-
I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Unable to open iTunes on PC running Windows 7. Error message: MSVC80.dll missing. ITunes had been working normally until I downloaded an update, and the error message appeared.
Hello bhillblom,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Windows Blue Screen Error Message Appears As Soon As IPod Connected
Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.
Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx
Maybe you are looking for
-
Zen Vision:M Problem, Not being recognised by computer tried everyth
My player used to be able to connect fine to my computer however now it doesnt recognise it at all. Windows media player is installed, I tried all 6 USB ports with no success and it doesn't appear in device manager. I have also tried on a different c
-
InputStream keeps reading forever
Hi, I have a 'little' problem with input stream. I have a Telnet connection established and I'm reading the input I receive. I read some input and then I send commands. I'm reading the input inside a while loop like this one: InputStream in = telnet.
-
IPhoto db copying from MBP to Air...
We tried porting all my wife's iPhoto media to her new Air from her old MBP. The sidebar shows up correctly and all the thumbnails are there, but the photos appear as blank pics. I thought iPhoto was a db, not a files manipulation system. Thoughts? D
-
Some problems in my scientific calculator
Hey friends, I'm trying in this days to build a special application for iphone device. In this application 1 part is a scientific calculator. I have some problems with the trigo function and some other, i really dont know why.. For example, this code
-
I sometimes use Photoshop to do photo editing of pix in iPhoto. After a session using Photoshop I reset the iPhoto preferences so that a double click opens the image full screen. In previous versions of iPhoto, the preferences would remember the loca