I have an I pad, hooked to a wireless printer , I need to print my bank statements. I know you have to snapshot it first, but it is printing on 4x6 photo paper is all. I need it to print on regular 8x10 paper so it will print the whole page and
How can I print off my I pad for bank statements on reg paper not 4x6 photo paper?
How nice of you to wait three whole minutes for an answer.
I don't know what you mean by "I have to snapshot it first". Can you explain what you mean? If you're making a screenshot and printing from your photo application, you're going about things in a very odd way. You should be using the Share - Print icon from whatever app (Safari?) your bank statement is in.
Matt
Similar Messages
-
Hi! I am stuck with my iPod, I have the 4th generation and I wanted to download the iOS7 but I accidently hit my iPod while doing homework and it discounted and stopped the whole process and now it says that I need to recover it but I can't recover it. Please help me!
4th gen ipod cannot run ios 7 at all.
iOS: Unable to update or restore - Support - Apple -
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.
I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
OSX 10.10.3
Best. -
I go to play on a game on my iPad it will load the game up and a minute later will go to a blank screen and then back to all my apps.does it everybtime? Why is that? What do I need to do to stop it?
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo -
I have a problem when opening a profile on Facebook. when I open the main page and facebook all ok but when I try to open your Firefox profile my block! what the problem ????? before me it was happening but now when I installed Firefox 4
WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
https://www.open-mesh.com/ -
Hello. I have an iphone 5s and i can not activate imessage nor facetime. I followed all the steps provided by the apple page and still i can not make it connect. The phone is connected to wifi at all times and has ios 8.
Can you send SMS by using the mobile data network instead of Wi-Fi? I had the same problem setting up my 5s from a backup of my 4s. Only after I sent an SMS via mobile data network, somehow iMessage and FaceTime got activated a couple of minutes later without me doing anything else.
I even changed my Apple ID password, because at one point I could not log into my account when iMessage asked for my account details.
If you have difficulty activating FaceTime or iMessage - Apple Support -
I have an iphone and 2 itouches register under my apple account. I gave the itouches to my kids but when they send messages shows my name in all of them. how can I personalized their itouches so their names will show in IM?
Hi Kevin,
Thanks for taking your time with this. this is messages via app on ipod touch. How can I personalized their itouches? I am new with all this stuff.
Thanks -
Since installing FF4 my pages are all scrambled..... black squiggley lines that sometimes fills the whole page or different parts. It is driving me crazy! PLEASE HELP! If I can't figure it out i will have to unistall and that will suck!
Since installing FF4 my pages are all scrambled..... black squiggley lines that sometimes fills the whole page or different parts. It is driving me crazy! PLEASE HELP! If I can't figure it out i will have to unistall and that will suck!
-
if i open cnn.com for the first time today and try to open it tomorrow i will get the yesterday news and not the updated one till i force refresh..and that with all the site
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]] -
Can't print a graph on the whole page in landscape
Hello!
I have XY graph that I want to print on the whole page in landscape orientation (paper A4).
On the screen the graph is small, so I do resizing, appending image to report, and then printing.
After sending it to the printer I get preview (from the printer software) and see that the graph uses only approx. 5/6 of the page in the width, in other words the height of the graph takes the whole height of the page (21 cm) and the width of the graph leaves 5 cm of the page unused.
I tried to change the width and the height of the plot area to get proper ratio, but in vain.
If I set the height of the graph too large it goes beyond the page, but whatever I write to the width I always get 5 cm of the page unused on the right side. (not including 1 cm of the margin).
Note: surely, if you set small width you can get more space of the page unused, I'm talking about increasing the width of the graph.
Any ideas?
See attached for the vi. I tried to save it for 7.1 version but it can't, so you'll need LabView 8.0 to check it.
Also in attached you can find the page preview I get before it goes to printer.
Thanks in advance.
Rashid.
Using LV 8.0 Pro on WinXP with printer Canon PIXMA iP1000 (also tested on HP printer, but I think it doesn't matter).Message Edited by Rashid on 06-06-2006 07:09 AM
Attachments:
Graph printing out.vi 40 KB
Report preview.png 48 KBRashid,
It could be that you would need to install the entire LabVIEW 8.0.1 update rather than just the updated Run-Time Engine (RTE). Here is a link to the 8.0.1 update. If you download and install this version, you can then use the utility to mass compile or compile when you are prompted.
Repost if you have more questions!
Andy F.
National Instruments -
I have never backed up my iphone to my itunes because I always used the cloud. However, a few months ago, my wifi disk in my phone burned out so the Apple Store told me to back up everything to my itunes. I am going today to get the iphone 6 so I connected my phone (iphone 4S) to my itunes and I backed up and synced. However, when I look throughout the summary page and click in different areas (Photos, Movies), I don't see any of my data -- it is still asking me to Sync from iPhoto or to sync from another location. By backing up & syncing my phone, did all of my data get saved? Or do I still need to do more steps?
Sorry for the long winded question, I am just so nervous to get a new phone and plug it in to be restored and not have any of my pictures, videos or contacts, etc. Any help would be so so appreciated!Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone -
Print scaleType:showAll, generates 2 pages, the correct page and one blank page
Hello,
So I have a the following function:
private function printJobCreator():void{
var printJob:FlexPrintJob=new FlexPrintJob();
printJob.start();
printJob.addObject(printableInvoice, "showAll");
printJob.send();
invoiceIndex++;
printAll();
It seems to kind of work. However when it prints, it creates one page that is the right page, and one page that is blank. This isn't going to work for me because I have to run batches of many pages, so having every other page as a blank page isn't an option.
Additionally, my goal was to print multiple pages in one printJob for batch reports. This unfortunately doesn't seem like it is going to work. I was able to make a component that essentially would repeat container.addChild(printableInvoice) for each index in an object, each printableInvoice containing some dynamic concept, however I can't for the life of me get it to print like this.
So the current solution is annoying because for each invoice you have to go through the print dialogue again. Any Ideas? I realized I could do multiple printJob.addObject() calls, but this doesn't work for me because of the blank page issue.... So I either need to solve the blank page issue or generate a UI object that has multiple printableInvoices in it and print that UI object.
Any help?
JoelThis is the flow, I don't see how it could be adding twice. The important stuff happens when the printAll(); function is run.
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.FlexEvent;
import mx.printing.FlexPrintJob;
import mx.rpc.events.ResultEvent;
public var Orders:Object = new Object();
public var printOrders:Array = new Array();
public var postOrder:String="";
public var invoiceIndex:int=0;
private function init():void{
getDataResult.token = orders.getData();
getDataResult.addEventListener(ResultEvent.RESULT, Orders_resultHandler);
private function Orders_resultHandler(event:ResultEvent):void{
Orders = getDataResult.lastResult;
for(var i:int=0; i <= Orders.length-1; i++){
if(Orders[i].print == 0){
printOrders.push(Orders[i]);
postOrder=printOrders[0].orderid;
for(var t:int=1; t <= printOrders.length-1; t++){
postOrder = postOrder + ","+printOrders[t].orderid;
private function orderToShipSorter():void{
private function printAll():void{
if(invoiceIndex <= printOrders.length-1){
printableInvoice.generateInvoice(printOrders[invoiceIndex]);
private function printOrderResult(event:ResultEvent):void{
private function checkLogin(event:ResultEvent):void{
private function printJobCreator():void{
var printJob:FlexPrintJob=new FlexPrintJob();
printJob.start();
printJob.addObject(printableInvoice, "showAll");
printJob.send();
invoiceIndex++;
printAll();
protected function printableInvoice_batchGeneratedHandler(event:Event):void
printJobCreator();
]]>
</fx:Script> -
Printer issue, I get to the secure page and can't log in
My printer won't print in black. I have followed all the instructions to fix it. I can not down loard the one help because it is a Vista. I get to the secure page and it asks for my name and password. I am the Admistrator but it doesn't accept any of my names or passwords and locks me out. What name and password is it looking for?
You are aware that all of your purchase made on the old AppleID are forever connected to that one and can't be transfered to a new one.
Allan -
I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2
icloud just keeps bringing up my old email address & asking for my old password which doesn't exist anymore and when I try to sign out of icloud it wants my old password, when I tried to change my primary email back to the old one it wants me to verify it through an email address that doesn't exist. Please can you help me sort out this nightmare.Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe
Maybe you are looking for
-
Windows does not recognize ipod nano, but it charges
Hey. If I plug my ipod into my laptop and computer, it does not recognize my ipod. It pops up a message that says that a unrecognizable usb device has been plugged in. It has, however, worked in the past. The ipod charges, but I'm not able to use it
-
Help on K700i- OK/Send Command Problem...
Hi guys, I need your help with SE K700i I developed a midlet that can send SMS. It works well with other phones but in SE K700i when i execute the SEND Command it doesn't do anything and sometimes when I used the BACK command and returned to SEND Com
-
IPad 2 and Apple wireless keyboard (function keys not working)...
Hello all, I just purchased the Apple wireless keyboard to use with an iPad 2. It pairs fine and I can type away but none of the function keys work (brightness, volume etc). Anyone have any ideas? I think these worked fine on earlier keyboard models.
-
I recently bought my mac, and i haven't been able to download anything, I don't have Disk Image Mounter, I have searched and searched even went as far as reinstalling the MacOSX bundle, and i still don't have it, I have not been able to download anyt
-
A consultant told our department manager that SAP was not going to enhanse Visual Composer; that it would only get bug fixes. I think he may have confused 7.0 with 7.1/7.2. Is there a future for Visual Composer or is it a waste of time.