I have an I phone 4 and since I upgrade to the lastest ios 6.1.3 , my volume slider is missing. The sound works when but I can't mute or turn up or turn down the volume. I've tried a hard reset , reboot, blowing air in the dock and earrplug jack. :-(
I tried almost evrything to restore my volume slider( + & - ). My phone rings, plays music and every other sound but I can't mute or put the volume up r down with the side buttons.. My volume slider bar is missing. This is only simce I upgraded to iso 6.1.3 .. What's with that?? I figured out how to manually mute the phone through (General, Accessibitily) by muting the bell for sound and unmuting the bell for silent mode. But what a freaken pain, when you have to take all those extra steps to turn your volume up or down or mute your Iphone??
We have no Apple Store here so no luck to bring it in to get looked at.. Please , does anyone out there know what else I coold do???
Cheers
Does it work with headphones plugged in? That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.
Similar Messages
-
i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks
See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
After you install Apple driver to enable the audio chip, YOU then need to manually download and install (Cirrus or Realtek audio depending on the Mac).
Cirrus realitypod mac audio driver
MacBook Pro '10 Cirrus Logic CS4206A (AB 11)
Realtek Drivers -
My keyboard clicks and ringer volume have disappeared. I have tried plugging in the head phones many times, blowing air in the headphone jack, credit card in the charger jack, everything on you tube basically! To no avail! Any suggestions?
Hi Bones777,
Thanks for visiting Apple Support Communities.
If you do not hear sound from your iPhone speakers, try these steps next:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If you still do not hear sound after completing the troubleshooting above, I recommend backing up your iPhone data and restoring the iOS software:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Best Regards,
Jeremy -
Why can I print from my iPhone and not my iPad? I have been able to do it in the past. I have tried a hard reset but it still cannot find the printer.
In addition to rebooting the router and the iPad, I would reset the printer as well. Unplug the printer from power and do the same with the router. Leave the router unplugged for about 30 seconds. Plug the router in first and let it totally start up, plug the printer in again, and then reboot/reset the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. Your WiFi passwords, location services, device preferences all have to be re-entered. You will not lose any data or media whatsoever. -
I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks
Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT -
How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?
Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best. -
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
Eddie,
There is a forum specifically for Boot Camp & MS Windows users. Because that is where the Boot Camp guru's hang out I'd recommend re-posting there. -
We have three users on my home desktop and since I upgraded to 8.0.1, Firefox has been deleted off of their accounts. I've tried installing it separately, but it still won't run. How can I fix this problem?
See:
*http://kb.mozillazine.org/Browser_will_not_start_up -
my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???
ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you
-
Hi. I've got iPhone 5 64 Gb, and since I upgraded my iOS to iOS 7 I've got some problems as: iPhone stuck, suddenly exiting from apps and the worst - randomly resting my iPhone... What happen to my phone? How can I fix this soon as possible?
basic troubleshooting
Reset
Restore with back up
Rstore as new
all as required and as described in User guide -
my iPhone 5 will not turn on. The apple comes on and off every 4 seconds. I tried a hard reset. I tried connecting to Itunes. Wazup?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
I just got Apple TV it is working great but I can't get it to pair with my ipad2, they both search and the ipad says it is discoverable but they just won't connect. All my iCloud stuff has appeared successfully onto the apple TV
My sister in America has paired hers so it means you can use it instead of the remote it is much better when searching for a movie title or song
-
Just recently my iphone 4s speakers started acting up. I have restored it twice once to a back up and the other time as a new phone. The speakers get really staticy on full volume and then it cuts out but if I turn down the volume and blow air into the speakers it goes back to play fine until I turn up the volume again. I'm going to try to clean it out with a toothbrush and see if that helps. But I'm curious does this seem more like a hardware problem or is it a problem with the operating system and I should try to hold out until ios 6 comes out and see if that helps. I've read all the problems with this so I'm hesitant to send it in since there is no apple store around here and find out I have to pay to get it fixed. Tried to talk to them on the phone but since it's a week past ninety days I would have to purchase apple care in order to get any help but yet that's only available for 30 days after your purchase so I'm not sure how come they can offer that over the phone. Thanks for any help.
Thanks for the help. The problem just started suddenly. The problem I have is the closest Apple Store is 3 hours away so I would have to send it in and I don't want to send it to them and then be told I'd have to pay for it. Would they just send the phone back if you decide not to have it fixed. I will probably just get used to it or maybe it will fix itself one day.
-
I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!
Jerricayoung,
you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen.
Maybe you are looking for
-
In my application when i am trying to login it showing this exception "[IBM][CLI Driver][DB2/LINUX] SQL0206N "ONLINE_FLAG" is not valid in the context where it is used. SQLSTATE=42703" can any one help on this issue ..... null
-
Hi there! For some reason I can't figure out how to replace ALL the occurrences of '_a, _b, _c' with 'A, B, C' in a text (for example this_list --> thisList or my_app --> myApp) When borrowing scripting code I find them easier to read writtenin my 'd
-
BI Integrated Planning: Cannot find a J2EE Engine
Hi gurus, I want to run "Start Modeler" in BI Integrated Planning transaction, but I got a error called "Cannot find a J2EE Engine". Does anyone have any idea to deal with it? I will assign reward points for useful comments or answers, thanks in adva
-
1) Battery was fully charged after update, and just under 6 hours later with no owner interaction (sleeping), the battery level was down to 9%. 2) Discovered on the Usage screen, that both usage and standby were exactly the same at just under 6 hours
-
The Wi-fi on my new iPhone is really slow. Download speed is 76k - upload is 92k On the 3G network I get 1,287k down and 263k up My laptop PC with USB cable to router runs at 9,290k down and 500k up. The same laptop with Wi-Fi to the same router runs