I have an Iad2 and ever since ios6-there are issues.I get occasional lock-ups and have to reboot. The WSJ app freezes when running their videos to the end. The only work-around is to stop the video before it's over. Worse than windows me !!!!!
My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?
I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
It also had no internet issues and none of the problems others have complained about in other threads.
unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch.
Similar Messages
-
I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues. -
GPIB read freezing when running vi without debug light ... (it works with the light)
I have a gpib read that spits out two values at a offset. This is in a loop thats defined by the initial , final and step size parameters. My question is, why does the gpib read freezes (or doesn't exectue; whenever I turn the debug light on(after it's been run), it 'lights' up only till the gpib read and nothing further). I replaced the gpib read with visa read , it doesn't freeze anymore but it only records zeros (when I can clearly see my system outputting some values). Any help would be appreciated.
*there was a similar topic about debug light and the reasoning was made to be a race condition. but I dont see how my situation is a race condition.
Thanks,
kb.
Solved!
Go to Solution.
Attachments:
racecond.PNG 37 KBkb003 wrote:
Cleaning up...for me thats the cleaned up version. I'm still figuring out labview.
Stacked sequence made the perfect sense in a 1-2-3 logical reasoning.
<snip>
I wrote my code from an ancient driver set. I figured why to mess with something that's already working. So, I built it all on gpib.
This brings up an ancient scrap I have with National Instruments. Namely, they advertize LabVIEW as something so easy to use, you can dive right in. Well the truth is, you can dive right in, but it's guaranteed you will be writing horrible code, and much more easily than with any other programming language.
In reality, you really have to have training, formal (classes) or informal (books on LabVIEW), just like with any other programming language. Because NI keeps promoting the LabVIEW Falsehood, you get managers that assign newbies to write complex code, and then you have issues like the one the poster has above.
I'll get off my soapbox now and return you to your local programming, already in progress...
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
The box and button lines are not displayed or are mis-sized, if they appear at all; problem varies with the website and page style.
The threads I found in discussions mentioned a couple pages that are no longer active/cannot be opened -- so these solutions don't work.
When starting version 5x and 6beta I get information certain add-ons are STILL incompatible with these versions?
Are there any work-arounds or patches?I am having this problem too. Just like WinOnBatch the problem started for me around firefox 5.0.1.
I have not been able to get rid of this problem. I have tried creating a new profile, restarting firefox in safe mode. disabling extensions 1 by 1. When I built this computer I did a clean install of firefox 5.0.1, and 2 weeks later with no extensions the problems came back. At that point I had the Java and flash plugins only.
When firefox 6 was released I did another fresh install (uninstalled firefox, went through my hard disc and deleted any reference to firefox and mozilla. Did the same in the registry, then run a registry cleaner and restarted the computer) before I installed firefox 6 and the problem was happening in less than a week. The I said to hell with it and re-created my entire profile from scratch and installed all my old extensions (updated them off course). 2 weeks ago it got really sever and I couldn't see any buttons on the chome interface and all web pages I visited were displaying really messed up. The only way i can describe it is kinda like greentech70 screenshots but on every inch of the application window. Like a really bad screen tearing effect.
The only thing that seem to help is when I downgraded to firefox 3.6.18. That fixed it but like greentech70 I have security and privacy concerns, so upgraded to firefox 6 again as the issue went away for 1 day, then came back but not as severe. since then I have been downgrading to firefox 3.6.18 re-installing java and flash, then upgrading back to firefox 6. It keeps the problem minimised but im still plagued by it. I also wonder if its a problem with firefox's 6 graphical engine. -
Getting really sick of my ipod force closing EVERYTHING...help please before I lose it
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I have just downloaded a new video and ever since video has malfunctioned
I purchased a free episode from itunes and ever since I dowloaded it I cannot watch that video or any of the others I have previously downloaded. Whenever I try to open the video the entire itunes program freezes up- it does not even show a black screen which usually preceds the episode...what do I do? After buying a season pass this is most distressing.
An error occured while attempting to creat the directory: C:\Program Files (x86)\iTunes\iTunes.Resources\ca.lproj\AppsPlacard.nib
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
My Mac Book pro recently started in safe boot mode and ever since I have had endless problems - To start with the keyboard will only input capitals and symbols althougth no locks are on and now I have a green wave on all white backgrounds! HELP!
Hi it's puzzled of Evesham....I didn't ask the question but have experienced exactly the same. I switched the computer on and it went straight to safe mode
-
My camera and flashlight stopped working suddenly, only my front facing camera works. The camera app freezes and has to be ended every time. What the heck...help?
Hi JDValentine,
If you are having issues with a camera on your iPhone, you may find the Camera troubleshooting in the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
- Brenden -
I have an Iphone 4S and ever since I did the IOS6 update I have not been able to update or downloand new apps. Itunes works fine along with everything else. I touch the update or download tab and nothing happens. Thanks for any input!
Settings, general, restrictions, are they off?
-
Ever since i got ios 6 it has been a slower and it says i only have 2 gb left when i have10 app and 0 songs. I got this iPod a few years ago so the warranty has already expired. Please if there is any way I can upgrade let me know.
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. Sometimes when you update and do other things files will be corrupted and make the "other" category large. Restoring from backup usually reduce the other .
- Restore to factory settings/new iPod. -
I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?
I know what your'e going through, Gary. OSX 10.6.7 is an absolute disaster. Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
Before 10.6.7 my system was running fine.
I've brought this up with Apple repeatedly. They smile and shrug. They've been helpful resolving the issues, but none of them has been easy to solve. I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.
I wish I could give you an answer to your question. My only guess is that Apple has totally dropped the ball on this one. In the future they should provide a disclaimer when they offer an upgrade. Something like: "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work. This is especially disturbing when you depend upon their system to make your living.
Good luck.
david -
I upgraded my iphone to 5.0.1 and ever since, it has decided to delete old text messages. Only with one contact though, not everybody. So for every new text message I send this person, an old one gets removed. Why? I don't want this to happen.
Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it. -
I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work
Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh -
I got my cracked screen fixed , and ever since my phone has been acting up. Now Im trying to restore it and it wont restore. Also my phone wont work without being on the charger. It just wont disconnect from ITunes Can I get help ASAP
nadiamilan wrote:
I think that is an great idea . But I wanna know if there is anything else i can do besides going all way back to the place i got if fixed at ....
Probably not. -
I recently updated to Firefox 8 and ever since I have done that, I can't get it to open. Every time I click on the icon on my desktop to open it, it crashes. I have tried all the steps in the Firefox crashes article and I can't figure out what is wrong. How can I fix this?
please install latest version of Roboform 7.6.2 and try
* www.roboform.com/support/news
Maybe you are looking for
-
How can I use a labview VI as a CVI instrument driver
I have a VI for the Keithley 485 that would like to convert into a form usable by CVI. I don't have labview so I cannot generate a DLL based on the VI.
-
I've recently downloaded a couple third party plug-ins and I can't seem to get them to show up when I open Final Cut. The folders are in: HD/Library/Application Support/Final Cut Pro System Support/Plug ins But when I open Final Cut they're not showi
-
Hello, we have some trouble with updating an existing DataSource. The DataSource is based on an extraction structure which we expanded with an append structure. We activated the append structure and did the same with the extraction structure. But sti
-
Hello I have installed Oracle9i on my laptop. I want to use iSQL*Plus but I don't see any link like that.. all I can see is SQL*Plus. As per my SELECT * FROM V$VERSION command I have Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production PL/SQL R
-
Multilevel Routing of Finished Product
Hi gurus, How can I see the multilevel routing of finished product (Multiple Finished product at one go)