I have an imac 27" 6 months old. When i turn it on after 20-25 mnts the screen gets vapourized. After an hour it gets cleared. How serious is it ?

Contact Apple Service, iMac Service or Apple's Express Lane and get it repaired/replaced. I had the display on my 27" iMac go south three months after buying it and they replaced it due to a similar fault. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Similar Messages

I have an iMac, purchased in 2007. When I turn it on I am getting a grey screen with a flashing question mark

Anyone know what I need to do

A flashing question mark indicates the startup volume cannot be found. Follow the link above for troubleshooting, however be prepared for a failed internal hard drive. If I am correct you will need to take it into an Apple Store or AASP to have the HD replaced.

TS3694 I have brought an iphone 4 on ebay when i turn it on it comes up with the connect to itunes . I then go to rstore but when it finishes extracting files it then says connecting to apple to verify phone and then a message appears saying that device c

I have brought an iphone 4 for my daughter on ebay and when it arrived it is in recovery mode. I connect phone to my computer and click to restore and it says its extracting files when it is finished it says connecting to apple to verify phone. Then it throws up a message saying device cannot be be found. Please help im a little stuck as to what to do now

Return the iPhone and get your money back. It has been
hacked/modified/jailbroken and likely cannot be made
operative.

I have a compact notebook and its not working when i turn it on it loads and then the screen turns b

its a model presario cq61notebook pc
system id 363f producct id wa980ua#aba

Was this iPhone jailbroken?

I have Power PCg5 running OS 10.4.11 It turns itself on from sleep condition. The screen is blank and there is no response to keyboard actions.

The screen is blank & the keyboard unresposive.
I power it down and then power up & reboot it.
It seems to run fine otherwise.

Most of the time that due to PCI cards, USB, or Firewire devices acting up.

I have an imac osx 5 mos.old. First time today I can not open my desktop folder/files. I need to read them. Message is: appleworks 6 quit unexpectedly. I need to read them. Is it possible that new software downloaded yesterday is problem?

I have an imac osx 5 months old. For the first time today I can not open my desktop folders which are very important to me. How can I open these folders.
The message when I click on the folder is "appleworks 6 quit unexpectedly". I can not open the folder. Is it possible that new software installed could cause the problem when I get the message "new softward available for your computer, install now. Maybe I should never install upgrade. Please help in layman's language how to open my folders. Thanks.

X423424X wrote:
The curious thing here is that on the one hand the code cannot be loaded so how could the trojan code be ever executed. But you would expect the "Unexpectedly quit" message if the intel trojan did get executed in a ppc app. So this begs the question when (and how) does the trojan code get executed in conjunction with launching an app?
I understand code injected into a specific app like safari that uses the global environment variable to access the code in /Users/Shared. But I don't understand how that code could be executed by attempting to run an randomly chosen ppc app. Unless of course other code has been injected is in a more critical place than just safari and that is scary.
Some of this was explained to us a few weeks back by an infected user who reverse engineered the code, working with Intego to figure out why he was being re-directed on Google searches. At the time, nobody believed much of anything he was saying, but F-Secure explains it more fullly in this analysis. Note that there is a filter component to keep it from loading code into apps that would be unstable, so watch for the next variant to filter out ppc only apps.
In a related matter, I got word from the PC side of the house that similar techniques are being used by drive-by infections that were injecting code into a running app which would disappear when they quit the app. A one-time infection, so to speak. Makes it really hard to even know you were temporarily infected, let alone how, why, what damage, etc.

I have an iMac about a year old. It has OSX 10.8.3 with iMovie 9.0.8. Is there a way to get iMovie to store and use iMovie Events on an external drive? Raw video is eating up my 1TB internal drive.

I have an iMac about a year old. It has OSX 10.8.3 with iMovie 9.0.8. Is there a way to get iMovie to store and use iMovie Events on an external drive? Raw video is eating up my 1TB internal drive.

Yes, you can import to an external drive by choosing it from the Import Screen.
Once an Event or Project is in iMovie, it is best to move it to the external using iMovie, so the Project does not lose links to the Event.
For full instructions on how to do this, see this link.
https://discussions.apple.com/docs/DOC-4141

I have an I Phone 5 White 64G, 1/12 month old , and I was an a call and I use the speaker mode , then all the sudden I couldn't hear anything ... I reset the mute switch , I reset setting to factory setting and still no sound... I think speaker just burn

I have an I Phone 5 White 64G, 1/12 month old , and I was an a call and I use the speaker mode , then all the sudden I couldn't hear anything ... I reset the mute switch , I reset setting to factory setting and still no sound... I think speaker just burn out:(

sunshinesunshine wrote:
So basically if a iphone has a fault after the 1 year warranty period is over, there is nothing the consumer can do but purchase a new phone??
Pretty much. Except that Apple will replace it for a fixed fee that is far less than the cost of a new phone. In the US the replacement cost for an iPhone 4 is $149. It is comparable in the UK. Unless you can prove that the fault was present at the time of purchase. A switch wearing out would probably be considered normal wear and tear, not a "fault".

I have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth.

i have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth
can not find any other device .like my car CD or other bluetooth audio device even my laptop.
i will be grateful fi some one can help
best regards
sam

And I forgot to mention I have just changed email addresses so with the old email it was all working then with the new email I'm only functioning one direction.

My macbook pro is probably only 2 months old and there is a buzzing/grinding noise coming from the left side of the laptop every time I open it. It may buzz 5 times in a span of 30 seconds then not make the noise the remaining time that it is open.

My macbook pro is probably only 2 months old and there is a buzzing/grinding noise coming from the left side of the laptop every time I open it. It may buzz 5 times in a span of 30 seconds then not make the noise the remaining time that it is open. I have read that it may have to do with my fan or HD. I am under apple care for a good amount of time but am wondering if this is a mjor issue. I would not be able to get to an apple care center in the near future due to being at school. Should I be worried or will it last by the time I am home in 2 months.

Sounds like the disk in your MBP is accessing data on wake up
If you are still concerned you can take it into the Apple Store where they can hear it to be sure
Allan

The iOS 8.1.2 update bricked my 4th gen iPad. I can't even do a DFU mode restore - error 4013. The iPad worked perfectly before the update and is 16 months old. Any suggestions anyone - except to shout loudly at the Apple support line?

I set my iPad to do the latest iOS update as per usual - over the air and while on charge. When I returned to it, it was non functional the screen was blank. I reset multiple times and at one point got a red screen. I connected it to iTunes on my Mac and tried to force a restore, but this didn't work - even in DFU mode. I have gotten a 4013 error every time. I've tried different cables and different USB ports etc, but no success. It's a brick.

I have multiple Macs around the house and have tried all of them - all with the same results alas. I've restarted, ensured iTunes is up to date etc too.
On DFU mode - yes - that's it. I have no idea what DFU stands for, but it this mode is often referred to as this. I get the 'connect to iTunes' picture and can begin the restore, but the process times out waiting for the iPad. Apparently, 4013 is associated with a cable problem,, but I know the hardware is all fine.
What I want to avoid is just being told to buy another iPad. That would be totally unacceptable for an error caused by an update to a 16 month old device. There has to be some solution!

I haven't used my laptop in two months and now when I turn it on it goes to ye white screen with the apple loads for a bit and then stops loading. All I have now is a white screen with an apple

I haven't used my eleven month old Mac book pro in two months and when I turned it back on it gets stuck at the silver wheel with the wheel of death spinning it has been like this for two hours

Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
Good luck & happy computing!

I have an iMac with 10.4.11 and a Mac Air 10.6.7. Will the Extreme be compatable with the 10.4.11?

I have an iMac with 10.4.11 and a Mac Air 10.6.7. Will the Extreme be compatable with the 10.4.11?

10.4.11 Macs will have Kernel Panics when trying to use Dual Band Airport Extreme Base Station. There are a few forums here dealing with it. I just purchased an Airport Extreme Base Station and spent two days now figuring out why the old iMac G5 running 10.4.11 (Tiger) was Kernel Panicing. There is a way that I am testing now that seems to be working. I will post the link in a minute when I find it. Other solution is to upgrade to 10.5 .
Here is the post
Aug 22, 2010 2:09 PM (in response to Acin)
Greetings... I have just found a resolution to this problem, at lease if you're using one of the newer Dual Band Airport Extreme base stations. This fix was provided by an AppleCare representative named Rebecca, and I am deeply in her debt. To review: MY PROBLEM - After installing a new Dual Band Airport Extreme in July 2010, I began to have frequent kernel panics with my older laptops running Tiger (10.4.11). My newer Intel/Leopard MacBook Pro ran fine with the new base station, but these older Power PC Macs with Tiger just crashed again and again. Pulling the Airport Card was the only fix. I tried every conceivable software and network fix; nothing helped. THE SOLUTION - The AppleCare rep talked me through this, but I'm pretty sure this was the procedure. Please note that I cannot guarantee that I have not forgotten a step! But I am fairly sure this is it. (If an Apple specialist is reading, please check this!) Keep in mind, this will only work if you have a dual-band Airport base station. I performed this on a Mac Pro running OS 10.6.4, with Airport Utility version 5.5.1 and firmware 7.5. 1. Launch Airport Utility.
2. With the dual-band base station selected, click Manual Setup.
3. Click the Wireless tab.
4. Click the "Wireless Network Options" button near the bottom.
5. Check the box that says "5 GHz Network," then enter a new network name in the Name field. (Your existing network name appears there now. Just delete it and type a new one.)
6. Click Done. That dialogue will close.
7. Now click Update. The Airport base station will now take about a minute to reboot. Here's what happens when you perform these steps... The utility changes your existing Airport network to 2.5 Ghz, and then creates a new 5 Ghz network with the new name. (It will apply the same password to both.) You will use the 5 Ghz network, the new name, for any new wireless computers using Leopard or newer OS. You will use the 2.5 Ghz network (bearing the original network name) for the older laptops running Tiger. This fix worked immediately, no problems. The issue is that Tiger does not perform well with 5 Ghz networks, and this causes the kernel panics. I now have two old G4 laptops running Tiger, both using my new Airport base station with the 2.5 Ghz network and running perfectly. At the same time, my new machine is using the 5 Ghz network at the same time. It seems quite stable. Good luck, and I hope this info is useful.

Hi, I have added on Musique finder my old CD and want now to add them on my iTunes, please, could you explain to me step by step how to do this? Mant tks in advances for your kind help

Hi, I have added on Musique finder my old CD and want now to add them on my iTunes, please, could you explain to me step by step how to do this? Mant tks in advances for your kind help

Correct, it will only be one-level, the Photos app doesn't support sub-albums - the sub-folders photos will be included in the parent's album.
If you select My Pictures at the top of the Photos tab when syncing, then you should get an album for each folder that is directly under it - so if I understand correctly what you described then that would mean an album for 2013, one for 2012 etc. And each of those should include all the photos in the subfolders under it - so 2013 would include the photos from the events and months subfolders under it.
You can't sync them separately, only the contents of the last sync remains on the iPad, by not including a folder in the next photo sync you are effectively telling iTunes that you no longer want that folder/album on the iPad so it will be removed and be replaced by the contents of the new sync (you can't delete synced photos directly on the iPad, instead they are deleted by not including them in the next sync).
The app that I use, Photo Manager Pro, allows you to select and copy a folder (via FTP), but you would need to select each subfolder individually, which if you have a lot would be time-consuming (I think that if you select '2013' it would ignore the folders beneath it).

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. How do I get all of my music on the laptop?

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. When I try to sync, I get a warning message stating that I will lose songs on my phone which aren't on the laptop. How transfer my music from my phone to the laptop?

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have an imac 27" 6 months old. When i turn it on after 20-25 mnts the screen gets vapourized. After an hour it gets cleared. How serious is it ?

Similar Messages

Maybe you are looking for