I have an iMac 27", running OS X 10.9.3 with 16GB omemory, 1 TB disc capacity and

I have a late model 2009 iMac with 27" screen. I am running OS X 10.9.3 and have a 3.06 GHZ Intel core 2 Duo processor. I have 16GB of memory and the disc capacity is 1 TB. I have a frequent problem with the pointer on the screen freezing in place. The only way I can fix the problem is to restart the computer. I am looking for causation and fixes.

Impossible to state if you don't provide any useful information. A good place to start might be by posting an EtreCheck report and then we can look for any obvious causes such as using antivirus apps or any other apps that are unncessary and may cause problesm. You can get EtreCheck by clicking:
http://www.etresoft.com/etrecheck

Similar Messages

I have an IMAC that runs OS 10.6.7. I use Netgear for wireless. My computer keeps losing the network, so I can't use wireless.

I have an IMAC that runs OX 10.6.7. I use NEtgear for wireless. I have a laptop and Ipod that I use on the wireless. Recently, my desktop computer shows that it is searching for the wireless system (on the router). I contacted Netgear. They talked me into buying another router and their technical contract. Nothing is working. I can plug my 5200 modem directly up to my desktop , and the network is fine, but the wireless, of course, is not plugged in. When I go to connect the wireless, it doesn't work. This is not a computer program per se, nor is it a router program because sometimes it will work. It seems to me that the computer and router are not working together to hold the settings.
I have attempted to download the latest software for my computer, i.e., Imac graphics fireware. Each time I try, it says that the extensions are not valid for my computer.
Any suggestions?
Thanks, Vicki

Imac graphics fireware.
Did you mean to say firmware? You should only install firmware updates when offered to you via Software Update; other than that, whatever is offered is not appropriate for your model.
As for your Netgear router - I have a Netgear and set it up manually on their web interface setup site (the address should be in your manual). Did you call your ISP so they will recognize that there is a router involved? Sometimes my iMac also does not want to communicate with the router; however, my Macbook and printer have no problem. I solved the problem by connecting things this way:
cable from wall to modem > cable from modem to router > cable from router to iMac. The other things are wireless.

I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive. Then I want to remove iPhoto libraries from iMac. What will happen to the iPhoto libraries that I back up when I run backup in a

I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive to free up space on my iMack Hard drive.
So, say I make the backup today, delete iphoto libraries from my iMac, and then backup my iMac in a week. What happens to the iphoto libraries that are on the external backup drive now that I am backing up the iMac where they no longer exist?
I will have them backed up to a separate second external drive as well.
I'm just very cautious about removing them from the hard drive.
Thanks for helping and understanding my crazy caution!

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting?

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting on the computer, and how?

One possibility is that you may need to "Upgrade" your Cable /DSL Modem if you have an older unit. ISP's that provide your Internet service in recent years have been switching over from DOCSIS 2.1 version Modems to DOCSIS 3.0 version Modems, which handle the new higher data streaming speeds the ISP's are offering. I would suggest you call your ISP's Technical Support and inquire about this possibility.

Hi, i have an old imac g4 running 10 .3.9,it has 2 partitions,1st partition has os9 and osx,but would like to put ubuntu on my empty partition,can it be done if so how,thanks for reading,

hi, i have an old imac g4 running 10 .3.9,it has 2 partitions,1st partition has os9 and osx,but would like to put ubuntu on my empty partition,can it be done if so how,thanks for reading,

I have my iMac G3 set up with three partitions like you are proposing.
I'd recommend getting virtual box on your new Mac. You can install the latest Linux version easier this way.
The problem is finding a PPC distro you like. I forget how I configured the Linux boot manager, yaboot. I may have skipped it or had it installed in the linux partition.
Ubuntu
The Ubuntu folks stopped supporting the power PC a while back. You will have to install an older version of Ubuntu.
You may to modify xorg.conf. See:
http://ubuntuforums.org/showthread.php?t=219532
Mac G3 modem install Howto
http://ubuntuforums.org/showthread.php?t=355205
You may have adjust adjust xorg.conf. See these instructions:
http://ubuntuforums.org/showthread.php?t=234437
I was able to get the last official versions of Ubuntu working on my G3 600.
6.10 Edgy Eft,
6.06 Dapper Drake
I used the alternate install and did the alterations noted above.
These versions are listed at the very bottom of the page.
https://wiki.ubuntu.com/PowerPCDownloads

HT1444 How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?

How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?

Buswab wrote:
How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?
If they are the grey discs which came with the iMac, then they will be machine specific and will not work on the MBP anyway. You will need to purchase a retail copy of Snow Leopard from the Apple Store for about $29 and upgrade from that. I presume your MBP is Intel and not G4.
Good Luck
Pete

I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?

I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?

Does your Mac meet Lion's requirements?
Apple - OS X Lion - Technical specifications
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Snow Leopard requirements:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can't save the file "TEST.pages" because the volume is read only.

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problem

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

I have an imac 2006 running 10.6.8 but I still can't upgrade to Mavericks. Is this model not able to run mavericks or is there a way to download?

I have an imac 2006 running 10.6.8 but I still can't upgrade to Mavericks. Is this model not able to run mavericks, or is there a way to download? Apple says any imac running snow leopard or later.

Again, some proof would be nice
Instead of just making a casual, blanket statement, why don't you just post the actual install procedure here, then.
Also, the 2006 models really do not have sufficient RAM specs to run Mavericks well.
So, I seriously question that your 2006 model iMac is running well on Mavericks.
2006 models could either take 2 or 3 GBs of RAM (you can install 4 GBs of RAM to take advantage of more efficient RAM processing of matched pairs of RAM, but the hardware will only recognize 3.2 to 3.4 GBs of that total RAM). This is barely the needed "real world" "working" minimum of RAM needed for Mavericks to run adaequately.
New iMacs ship with a much better 8 GBs of RAM.
If you can't offer/post proof with an actual install procedure for installing Mavericks on unsupported Macs, then I would suggest you stop posting your assertion that
"I have done it" garbage and post knowledge and info that is REAL and relevant to users of 2006 model Macs that need accurate info about this.

I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw)

Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting?

Have old MacBook Pro running tiger 10.4 want to save date to external hard drive and buy newer MacBook and still use same drive. Any suggestions, most WD drives say nothing about os tiger 10.4.

Have old MacBook Pro running tiger 10.4 want to save date to external hard drive and buy newer MacBook and still use same drive. Any suggestions, most WD drives say nothing about os tiger 10.4. The OS compatibility is much newer on the data. Totally confused. Not a computer person.

I haven't checked reviews recently but there's a difference between bare drives and drives with enclosures. Western Digital made some of the most reliable drives last time I checked, though the enclosures weren't all that great. It is convenient to get both in one package but I usually buy a highly rated enclosure and then put a highly rated drive in it myself. OWC sells some good enclosures but if they put a so-so drive inside of it then the package is only as good as its weakest component. If you get a package from them, ask them what drive is inside (some vendors have no idea what's inside - went to an Apple Store recently and they couldn't tell me what was inside some of their Apple brand enclosures). My first thought if buying a new drive would be to buy a OWC enclosure with a WD drive, but chek around because I may be out of date.
10 years ago Seagate was one of the best drives. Now they rate poorly in reviews.

TS3048 I have two iMacs 6 feet apart. One has no problem connecting to the wireless mouse and wireless keyboard. The other can"t seem to find either device.

I have two Imacs 6 feet apart. One has no problem connecting to the wireless mouse and keyboard. The other indicates it can"t find it"s wireless mouse and keyboard.

Hello:
A Bluetooth device may only be connected to one thing at a time.
Barry

Is any one running the 2011 mac book pro with 16gb

Is anyone running the new Mac Book Pro with 16GB? I am going to purchase the new Mac Book Pro and there are now 8gb memory boards on the market so it becomes feasible to have the Mac Book Pro at 16gb (2x8gb).

might be better off (this is about a macbook pro?)
http://www.apple.com/support/macbookpro which has lnk to fora
For memory upgrades to get an idea:
http://www.macsales.com/memorymacbookpro
Yes, some, some CS5 wigs and you will find a link to "Articles" and MBP upgrades and CS5 on your laptop:
http://www.macperformanceguide.com

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

Just bought an iMac and use iCloud. calendar appointments on iMac are displayed 24 hours out of sync with the iPhone. the iPad and macbook air pick up the same information correctly. why is this?

just bought an iMac and use iCloud. calendar appointments on iMac are displayed 24 hours out of sync with the iPhone. the iPad and macbook air pick up the same information correctly. why is this?

Hi smokeondz,
Thanks for visiting Apple Support Communities.
If your iCloud calendar entries are not displaying as expected, start with the troubleshooting steps in this article:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Best Regards,
Jeremy

I have an iMac 27", running OS X 10.9.3 with 16GB omemory, 1 TB disc capacity and

Similar Messages

Maybe you are looking for