I have an imac an  with osx snow leopard and I can no delete mail messages, the colored disk just keep rotating around ?

How can I delete old messages in my mail app. I set it up a yr ago but I don't use it. I go directly to my mail account to retrieve my mail.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Similar Messages

  • Issues with OSX snow leopard and quicktime

    I recently installed snow leopard and quicktime x does not play avi files. I've tried the perian patch but it won't install on my computer. Everything goes accordingly but when I go to the perian pref panel it says not installed. I click the manual install button and nothing happens. Any ideas?

    Remove the Perian prefPane from /Library/PreferencePanes/, download the latest version, and try installing it. If still no go, try VLC.

  • I have an IPhone 5 with 2 email accounts and I can't seem to change the sound for my primary account. When I change the sound it is for my secondary email account which I hardly use. How do I change the sound for my primary account?

    I have 2 email accounts on an IPhone 5 and can't seem to change the sound for my primary email account.

    Try going to Settings>Notifications>Mail, tap your primary account, then tap New Mail Sound and set as desired.

  • I have an iMac (2007) with osx 10.5.8, I would like to upgrade to mountain lion 10.8. Is it possible?

    I have an iMac (2007) with OSX 10.5.8 and I want to upgrade it to mountain lion. It tells me I must have OSX 10.6 or higher but it won't let me upgrade to that. Is it possible or do I have to buy another iMac? Love my iMac! I'll never have a PC again. Macs all the way.

    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
            1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    Note that you need a specific 2007 model to run Mountain Lion.

  • Hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

    hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

    anas guellaf wrote:
    it still make 3 bips before starting the IMAC.
    That is another problem not related to the Mac OS X version you are trying to use.
    Three beeps at startup means you have a bad ram module in the computer.  Did you install the ram or did it come from another owner this way?  The first problem you need to solve is the bad ram.
    When the iMac starts, go to the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware, Memory and see what the report is on the memory...does the iMac report all memory modules that have been installed as OK or does it show bad memory?  If there is not any information, you then need to remove the memory modules and restart one at a time to see which is bad.
    On the bottom of the screen there should be a small door that you can remove with a small screw driver.  You need to lay the iMac flat, disconnect the power cord, remove that small door and remove the memory modules.  You can then put two in (if it has four) and see if it starts without the beeps.  Do that with each module so you find out which is bad.  Once you know the bad memory, you can buy a new module, just like the ones installed, so the iMac starts without the beeps.
    Next, you cannot use a DVD for another computer for your iMac unless it is from one that is identical to yours.  So, you need to talk to Apple and have them send the DVD for your particular iMac.

  • I have an iMac mid-2010 running Snow Leopard. Is it possible to install Mavericks and Windows 8 on separate partitions while keeping Snow Leopard?

    I have an iMac mid-2010 running Snow Leopard 10.6.8. Is it possible to install Mavericks and Windows 8 on separate partitions while keeping Snow Leopard? If so, can you describe the steps?

    That should not be a problem as long as there is enough room on each partition for each OS.
    You would:
    Use Disk Utility to partition your HD
    Download the Mavericks installer and install it on one of the open partitions (when you run the installer from your 10.6.8 partition, it will ask you where you want to put Mavericks, and you will specify one of the open partitions).
    Use Boot Camp to install Windows on another of the open partitions. Mac Basics: Using Windows on your Mac via Boot Camp

  • Hello.  i have a 2011 iMac G4 with OSX10.9.2  and I can't find AirPlay .   is it on this version of iMac?  i just got a new soundsystem expecting to connect via AirPlay

    hello.  i have a 2011 iMac G4 with OSX10.9.2  and I can't find AirPlay .   is it on this version of iMac?  i just got a new soundsystem expecting to connect via AirPlay but don't know where to find it....?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • Could a 2012 macbook pro from the factory been loaded by the factory with both Snow Leopard AND OSX Lion?

    could a 2012 macbook pro from the factory been loaded by the factory with both Snow Leopard AND OSX Lion?

    I think MBPs stopped coming with Snow Leopard installed as of the late-2011 models. That's when OS X Lion started being pre-installed on MBPs. Some earlier MBP models (2010, early-2011) had a firmware update to allow Internet Recovery (command+option+r) which would allow a reinstall of OS X Lion (purchased from the App Store) with the purchaser's AppleID/password.
    I don't believe SL would even install on a 2012 MBP.

  • I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4

    I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4 and can it be done on a g4

    If you have a processor of 867 MHz or faster and a minimum of 512 MB of RAM, you can run OS X Leopard, updated to 10.5.8.
    That's as far as a G4 can go.
    Check eBay for discs:
    http://www.ebay.com/sch/i.html?_nkw=Mac+OS+X+10.5+Leopard+Retail&_sacat=0&_odkw= Mac+OS+X+10.5+Leopard+Full+Retail&_osacat=0
    No Snow Leopard, 10.6x or Lion, 10.7x.
    they won't run in a PPC Mac.

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • How to wipe off everything from my 15 MacBook Pro? I bought my Mac in Middle 2010. It was with OS X Snow Leopard, and a few months ago, I installed the Lion, so I couldn't just insert the CD and reinstall.

    How to wipe off everything from my 15 MacBook Pro? I bought my Mac in Middle 2010. It was with OS X Snow Leopard, and a few months ago, I installed the Lion, so I couldn't just insert the CD and reinstall.

    Yes, you can and should. The DVD belong with the MBP. You should use the original DVD to erase the disk and install Snow Leopard prior to sale.
    You can't sell it with Lion because it is authorized under your user ID.
    Allan

  • Trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX   update needed?

    trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX   update needed?

    Your install disk must look like this
    and not like this.
    Those gray disks are machine specific and will only work with model of Mac that they shipped with.

  • I have photos from my computer saved on my Iphone and I can't delete them from the app photos. How can I delete them?

    I have photos from my computer saved on my Iphone and I can't delete them from the app photos. How can I delete them?

    You'll have to deselect the photos in the photo pane in iTunes on your computer and then sync the phone again, this will delete photos that have not been taken with the phone but synced from the computer.

  • How do i get a dvd with osx snow leopard to boot from since i lost mine?

    Having trouble with my early 2009 intel iMac. I have reset PRAM and SRC, used disk utility in safe mode to repair disk permissions (several were found/repaired) and tried to verify disk. System said it could not verify disk because it needed to be repaired while booted from another source. I could not find my OSX Snow Leopard disk, tried to start from Leopard disk. Now the system wont go through boot process at all. the gray screen with logo and progress bar appears, but after a minute the computer shuts down. I did run the apple hardware test (start up while holding D key) and no hardware issues were found. This must be a software issue.
    Is there a way I can download a copy of OSX Snow Leopard on my laptop so I can burn a disk to boot my iMac from so I can repair the disk?

    You will need the Mac OS X DVD later, because it's clear that there's a problem with the hard disk. Your Mac turns off because fsck couldn't repair the hard drive, so Mac OS X can't start up. Your only option is to format the hard drive, because it's not possible to repair it.
    As you have the Leopard DVD, insert it and hold the C key while your Mac is starting. Then, choose your language and go to Utilities menu (on the menu bar) > Disk Utility, choose your hard drive at the top of the sidebar, go to Erase tab and erase the drive. If it's working properly, close Disk Utility and reinstall OS X.
    If it couldn't be erased, the hard drive is damaged and you need a different one

  • I Have mac osx 10.5.8 and have tried to update to mac osx snow leopard 10.6.3, but I constantly get the install failed message. What could be the problem?

    My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
    What could be the problem?

    noondaywitch wrote:
    You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
    I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
    Install Mac OS X icon while booted up normally) fails.
    There are several reasons for this:
    The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
    The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
    The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
    The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
    Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying.

Maybe you are looking for

  • Help with Nano not working

    Help!!! My Nano was fully charged and I let it sit for longer than a week. When I went back to the Nano, the battery was gone. I attached it to my Mac and the apple logo appeared and disappeared. It would not power on. The Nano turned on after 20 min

  • Getting SOAP Exception :Unable to internalize message

    Hi, I am using the SAAJ API for the very first time. I am writing a sample servlet which listens to SOAP Messages using HTTPS Post. I am getting exception when I am trying to create the SOAPMessage . SOAPMessage message = messageFactory.createMessage

  • Merging contacts between iphone and Outlook  rather than syncing

    I want to be able to update a contact on iphone and in Outlook and when I sync I want the contacts to merge. At the moment they seem to sync so if I have deleted on old phone number in Outlook but it is still on iphone it reappears after the synce an

  • How to convert idml to pdf in java through SOAP?

    Hi All, I am very new to INDD Server SDK. My question can be very basic.Sorry for that in advance.  What I need to do is sending an idml file to InDesign CS6 Server and get a PDF back in java. This is required to enable translators translating idml f

  • ZBATMAS03 - extended idoc segment population

    Hi, I've found an extended IDoc ZBATMAS03 (basic type: BATMAS03). It's being used for generating outbound IDOc usiong change pointers. A new segment Z1BATMAS has been added to the extended one. Now I'm not able to find where this segment is being pop