I have an iMac and a NAS installed, I've made an automator based script to mount the NAS volumes, will i have to rewrite when moving to Lion?

Hi Tony,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Similar Messages

I have a CD, Creative Suite 6, Education Edition, which I've used on my pc. Now I've changed to an Imac and can't install the CD. There is install.exe that can be used on a Mac. Could you please help me?

I have changed from PC to an Imac and try to install the CD with Creative Suite6, design & web premium, Education Edition which I bought before the cloud appeared. I can't find the install.exe for mac on it, just for pc. What shall I do?

The only cross grade option I know of is the one I linked you to in my original reply.
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Get chat help with orders, refunds, and exchanges (non-CC)
http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

I bought a new iMac and want to install my copy of CS3 on it. Currently, I have photoshop only load

I bought a new iMac and want to install my copy of CS3 on it. Currently, I have photoshop only loaded on an older G4. After installing the discs I tried to enter the serial number and an alert said the serial was already used. I did have CS3 loaded on a 2007 imac but after the harddrive died it is no longer installed. Can you help?
Allen

to reset your activation count, contact adobe support, http://www.adobe.com/support/chat/ivrchat.html

Had CS4 on Power PC Mac (Non Intel) Now have new iMac and trying to install CS6 but won't accept serial number

Had CS4 on Power PC Mac (Non Intel) along with prior Photoshop versions. Now I have new iMac and trying to install CS6 but it won't accept my original serial number (Starts with PSW401, etc.).

I know what you are saying. I had purchased the CS5.5 upgrade, and a week later got the CS6 upgrade. I did this back in 2012. I had a old Mac Power PC which does not allow you to install CS5.5 or CS6 because it was not an intel processor. So even though I had the upgrades I never installed them. I waited until my old MAC died which it did this past weekend. And now that I have a new iMac I tried to install the new software. All of my past upgrades referenced my original Photoshop that was still resident on my old Mac. But since the install no longer has that reference because of the new computer, it will not accept any of my past serial numbers that it needs for the install.

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install b

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install but it thinks I have a pirate copy. What can I do?

If you click the link in my first post in this thread, then click "still need help? Contact us" it takes you to a page that looks exactly like the page where you started, but isn't. Select PSE for the program you want help with, click "Activation and Signing In" for the problem area and you will see this:
The gray area below the blue bar is a link to start a chat.

I have an IMAC and an IPAD. How do I do face time/video chat betweeen the two.

I have an IMAC and an IPAD. How do I do face time/video chat betweeen the two?

You need to have the facetime app installed on your iMac and you need to be using an iPad 2.

I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

Thanks very much. Yes, I am using the installer files and serial number from the URL you referenced above. I have spent many hours trying to get it to work. I would love some help!!
The problem is that the instructions that come in the pdf with the downloaded files do not work, because the files that download from that page do not have the names referred to in the pdf, and most of the things that are referred to in the instructions do not happen. Here is what actually happened.
When I downloaded the files from the website, these are the files that downloaded:
I double-clicked each one and they extracted into two different folders.
Then I read a message on the forum that said to move all the extractred files into the same folder, so I moved all files into one file at C:\Creative Suite CS2\Adobe Creative Suite 2.0 as was pictured in the forum message. Here are screen shots showing all of the files in that folder I have now:
So then I double clicked the "Setup" file and I got this error message:
So then I tried to install the programs separately from the installer inside the folders Photoshop and Illustrator. I got this far and entered the serial number from the website:
But then I got this error message, even though I was using the files and serial number exactly from the website:
I tried both photoshop and illustrator and the same thing happened.
(I also looked at Solution 2 that you mentioned above but I don't have anything called VCOM on the computer. Also the error message that I got is not that one.)
I think I really need a set of instructions that lists the steps in order to do, but based on the files that actually download from the website and what happens when you extract the files. I feel as if I have all of the proper files but it still doesn't work.
Thank you very much!

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

After re-installing Win 7 64 on my computer, and attempting to install my copy of Adobe Photoshop Elements, I now get the following message: "This version of Photoshop Elements requires MS Internet Explorer 4.0 or higher to be installed". Does anyone have

After re-installing Win 7 64 on my computer, and attempting to install my copy of Adobe Photoshop Elements, I now get the following message: "This version of Photoshop Elements requires MS Internet Explorer 4.0 or higher to be installed". Does anyone have an idea of what the problem is? It has always worked in the past.

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

I have a macbook pro and I recently installed OS X yosemite 10.10.1. Since then the scanned documents from my canon mx450 appear black, even those that I have scanned before the installation. It works fine on other pc though. I tried reinstalling the

I have a MacBook Pro and I recently installed OS X Yosemite 10.10.1. Since then the scanned documents from my canon mx450 appear black, even those that I have scanned before the installation. It works fine on other pc though. I tried re-installing the canon drivers but nothing changed. Please help.

zoiand wrote:
Since then the scanned documents from my canon mx450 appear black, even those that I have scanned before the installation.
This is very odd. Were the images that you scanned before installing Yosemite saved as JPEG? If yes, have you tried saving the scanned image as a TIFF?
Also, if you scan to a USB memory stick from the MX and save this as a JPEG, and then open the file on the Mac, does it also display as black?

I have macromedia fireworks mx on an old laptop and want to install it on my new laptop were can I find the download file

I have macromedia fireworks mx on an old laptop and want to install it on my new laptop were can I find the download file

Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I'm using aperture 3 and mobile me to set up galleries which I send to friends. My question. Will icloud allow me to do the same or will i lose this function when mobile me closes down in July.

I'm using aperture 3/mobile me to set up photo galleries which I send to friends. My question. Will icloud allow me to do the same or will I lose this function when mobile me closes down in July. If this function isn't part of icloud does anybody have any suggestions how I can do this in future through aperature. Thank you

You will have to find a new hosting service for your galleries, when MM is gone; but you will still be able to create the galleries with Aperture. Export them to your disk and upload them via FTP to your new hosting service.
See these support articles: Migrating from Mobile Me
http://www.wilmut.webspace.virginmedia.com/notes/migrate/frommobileme3.html
and this FAQ about Mobile Me and iCloud Transition http://support.apple.com/kb/HT4597

IPhone 4 - my phone doesn't "ring"... Speaker plays, it works on vibrate, and when you set the ringer, it will play. Just not when an incoming call comes in. Any thoughts?

iPhone 4 - my phone doesn't "ring". Speaker plays, it works on vibrate, and when you set the ringer, it will play. Just not when an incoming call comes in. Any thoughts?

Check the position of the mute switch. On the side, just above the volume keys.

Want to play pre-intel game, got a PowerPC iMac and want to install OS 9, anything I need to know before hitting ebay?

Found the pre-intel machine, but unfortunately (in this case) it is running OS 10.4.11. Want to make sure before I buy from ebay that I am getting the OS 9 I can use on this computer. Saw a reboot set for OS 9, will that work? Or do I need to already have 9 installed, which I don't. Does it matter which OS 9 version I get, or if advertised as for another model of computer will it translate to mine? Thanks ahead of time!

yayamaui wrote:
hmmm, ok, need some clarification, please bear with me, not very techie, but love learning.
So I have a 2003 iMac PowerPC G4 (PowerMac6,1 768 MB 1 GHz) currently running OS 10.4.11. NO DISKS whatsoever- someone gave me the computer, it was about to go in the "recycling". (which is such a shame- WHAT A COOL LOOKING COMPUTER!!!) I also have this year's model of MacBookPro and have had many macs, so I am not trying to be an apple rip off- just trying to play a game they have made obsolete. Wish I had kept a few of my older ones...
When I try to play this really cool game it says it that the classic environment is no longer supported. So question time: can I purchase a copy of the tiger os and reload it? I understand that the disks are extremely model specific and apple info says my model originally shipped with 10.2.3 installed, but what about the black retail copies verses the grey lables? And would this theoretical re-install of tiger then automatically include the classic mode, or is that a seperate disk? And if one purchaces this retail install disk, are codes necessary? I have the overall user password from the original owner, but alas she tossed the disks...
the cool game is Alice: an Interactive Museum and is worth all this trouble... it will play on os 9. The sheepshaver, looks way too complicated for my level of computer knowledge, but thanks for the suggestions.
"The transcendant world of Alice was created through the cooperation of artists in three fields - the painter Kuniyoshi Kaneko, the musician Kazuhiko Kato and the computer-graphics artist Haruhiko Shono. The theme of this unusual collaborative effort derives from Lewis Carroll's Alice's Adventures in Wonderland and Through the Looking-Glass. Kaneko provided numerous of those of his pictures that have been influenced by Alice's world and Kato contributed the music. With these as his material, Shono has created an elaborate interactive environment. The stage upon which this drama unfolds is a house of twelve rooms that include a gallery, an atelier, a wine cellar and a photo studio, each connected to others by corridors, doors, and even secret passageways. The persistent player will find as well a single exit that opens to the outside world. There is also hidden throughout the twelve rooms a deck of playing cards. On each card is a message that will enable you to unlock the mysteries of Alice's world. A wonderland of striking works of art, interactivity and compelling adventure game is waiting to be explored by YOU."
Your iMac G4 is one of the following three:
[click on image to enlarge]
Accordingly, the earliest operating system that will boot your computer is either OS X 10.2.3 or 10.2.7 depending on which specific Mac. Since you say your label says it shipped with OS X 10.2.3, it must be the first one listed. Hence you cannot boot OS 9 on this computer, but you can install OS 9 into the Classic Environment on it.
Reading these Apple Support documents will help clarify what you need to purchase:
http://support.apple.com/kb/TA21153?viewlocale=en_US
http://support.apple.com/kb/HT1585?viewlocale=en_US
So while it would be helpful to have a set of OS X Jaguar install Disks in your library, it does not look like it is essential; you just need to have OS 9 to install into it.
I think I made this offer once before...
Let me know if the set you purchase works for you. Contact me by email; screenname at AmericaOnLine
Is that the "Luxo" iMac G4? I still have the one my daughter purchased years ago. The original disk set must be around here somewhere...
If not, I have quite an extensive OS Library from those days. I'll swap you!

I have an iMac and a NAS installed, I've made an automator based script to mount the NAS volumes, will i have to rewrite when moving to Lion?

Similar Messages

Maybe you are looking for