I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?
I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?
Thank you for your reply. I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years. The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import. Now all of a sudden my iMac does not recognise the camera. However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing. So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years. I can only assume that the settings on the iMac may have changed, but I cannot verify this.
Similar Messages
-
I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?
I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy -
i have all my music on my old computer but the port broke on the old computer and i want to put my music on my new computer but the usb port is broken on the old computer
See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!
I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty. -
MacMail has stopped noting when I have read an email. For example, I had 17 unread messages, so I read them. Despite me having read them AND deleted them, the inbox still has 17 new messages displayed. Can anyone help resolve the incorrect display?
Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com
-
Hello,
I have an itunes gift card from the uk but i live in france and therefore have a french bank account. itunes won't let me redeem the money from the card because my itunes information is french. Can anyone help me?
Thanks,
DrewSorry, but you cannot use a UK iTunes card in any country other than the UK. Sell or give the card to someone in the UK and buy a French prepaid card.
Regards. -
i am so tired. Have used many hours now to find a way to get my fotos from my Iphone to my PC'er (windows 7). I have downloaded Icloud, but I cannot aktivate "foto" When I click on icloud there comes a window, where it seems that I can click on foto. But within sekonds the 3. (foto) possibility freezes and the vindow sort of changes: You can still se the choice "Foto" but it cannot be activated. Can anyone help, please!
Thanks for the link to your system.
You have a Combination BluRay and Surround System that includes WIRELESS Rear Speakers:
Rear wireless ready: Yes, 5.1ch wireless system included, 7.1ch wireless option with purchase of SH-FX67 + SB-HS100A
This could account for why the BluRay is generating interference with your wireless network signal.
You can go thru the process of changing the wireless channels and other changes to the Verizon Actiontec Router or hook up your old router which was working before you switched to FIOS.
FIOS has a Superior Product over any cable system and I would hate to see you leave over something that was out of their control.
By the way, looking at the picture of the rear connections for your Panasonic you would want to have an Optical Toslink cable go from the back of the Verizon HD Set Top Box (Optical Out) to the Optical In jack on the back of the Panasonic. This connection will provide you with Dolby Digital sound (If Broadcast by Channel) while you are watching TV. You may need to switch inputs on the Panasonic Remote to get this to work. You may also have an Optical Out jack on the TV that could be connect as well if you are using an HDMI Cable.
Your Verizon STB would be connected to the TV by either HDMI, Component, Composet, or Coax (Highest Quality to Lowest Quality). The HDMI would also provide sound to your TV so that it's internal speakers would work if desired.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
When my screen saver has been on a while, I have to use the cursor to "rub out" part of the screen saver to see my login section. Can anyone help me with this?
I don't have a solution for you, but just wanted to let you know I used to have the exact same problem. I resolved it (for the most part....about 90% of the time, anyway) by adjusting the screensaver and power settings to never let the computer go to sleep.
-
I made a purchase of an album on iTunes...somehow I deleted the whole album from my iMac and now when I go back to my purchases it does not give me the option to download the whole album again, instead it gives me the option of plaing them...please help!!
Where are you looking to download them from ? You might be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your Mac's iTunes. If that album shows there but doesn't have the cloud symbol against it for redownloading then that implies that it's still in your iTunes library
-
I have the latest iTunes, but it keeps closing itself! Can anyone help me?
I have the latest iTunes, but it keeps closing itself! Can anyone help me?
Hello,
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1 -
why can't I download from kuler, my computer doesn't recognise the .ase files its says its an unknown format, can anyone help please?
why can't I download from kuler, my computer doesn't recognise the .ase files its says its an unknown format, can anyone help please?
-
I do not have the option AUTHORIZE Computer on my Store Screen. Can anyone help me find it?
Click the word "Store" at the top of your computer screen, next to file, edit,etc
-
My iphone 4s has ceased to make the keyboard click sounds. I reset it and made sure that the keyboard click sound is selected in the Settings menu but still no click sound. Can anyone help?
In Settings - Sounds - Silent - Vibrate, I tried toggling back and forth from "on" to "off", but still no keyboard click.
-
I'm using proxy media for a video I'm editing but now that i switch back to the original media some of my effects are missing can anyone help me.
Shouldn't happen.Only thing I can think of suggesting is to delete render files and try again. Trashing preferences is a long shot, but no harm in trying. Use the Digital Rebellion Preference Manager, a free download.
Assume you have a reason for using such an outdated version of FCP X. That may be contributing to your problem.
Russ -
EVERY TIME I MOVE SOMETHING TO THE TRASH IT IS ASKING FOR MY PASSWORD? CAN ANYONE HELP?
EVERY TIME I MOVE SOMETHING TO THE TRASH IT IS ASKING FOR MY PASSWORD? CAN ANYONE HELP?
Check this Link out.
When I updated to Mountain Lion my iMac messed up file permissions and always when I booted or started up my iMac it went to terminal screen because start-up disk was read-only. You might have to change file permissions to what it was so your mac won't always ask your permission to do something (assuming you are admin of your mac).
PRAM reset might help too. Instructions can be found from the discussion that I linked (there's another link for PRAM [parameter random access memory] reset).
Good luck!
Maybe you are looking for
-
Various questions related to itunes that was not able to see around
well...i will try to be quick and as clear as possible 1) i have a macbook, where i download podcasts and i use it to listen to my collection of music, saved on an external drive....now i have no more space there, so i was thinking to move on externa
-
Hyperlink not working in iframe
ive created a hyperlink in one of my iframes, ive made sure its on top of every layer. it works in iweb, but after ive published it, it doesnt seem to work. www.milkysyndication.com is the site, on my news page, the latest entry has a click here. its
-
How to make quantity in PO/RFQ over then PR
Dear all, I had a problem in PR convert to RFQ or PO when it was quantity over then PR. but its changed without unrelease PR or change PR quantity. Thx.
-
PC died before I could deactivate
PC just died. Will replace ASAP. How can I reinstall photoshop CC and Lightroom on the new computer not being able to deactivate them from the dead computer?
-
The iTunes Store is broken in iTunes 10.7 after OS 10.8.3 update
Yesterday I updated both my Mac Pro and 17" MacBook Pro with the recent 10.8.3 OS update, and today the iTunes Store displays like primitive HTML with no images. Anybody else seeing this?