I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are n

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are none available. How can I update my system to ver 10.8 or newer to accommodate the new banking app?

You can update directly to Yosemite (for free) through the App Store (this is 10.10). Make sure your existing applications will run on this OS.
If you wish to stay at 10.8, you can order this through the online Apple Store (it's $20), and they will email you a redemption code to be used on the App Store.
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Matt

Similar Messages

I am running OS X version 10.7.5 on a Macbook Air. I read in one thread where someone had an update that was higher than 10.7.5 but when I ask for updates, none are available. Is this the last update for OS X?

I am running OS X version 10.7.5 on a Macbook Air. I read in one thread where someone had an update that was higher than 10.7.5 but when I ask for updates, none are available. Is this the last update for OS X?

Niel, thanks for your response. I have been very wary of downloading Mavericks on this machine. I don't feel it has the power to run it and I'm afraid it was slow it down terribly. It was bought in late 2008. It's fine for my purposes at this time…just holding on until I buy a new one. I have the same problem others have with autofill not working, so I was trying to see if an update would help that situation. Grace

Is my imac with processor 2.4 GHz Intel core 2 duo with memory 1gb 667 MHz DDR2 SDRAM compatible with lion????, is my imac with processor 2.4 GHz Intel core 2 duo with memory 1gb 667 MHz DDR2 SDRAM compatible with lion????

is my imac with processor 2.4 GHz Intel core 2 duo with memory 1gb 667 MHz DDR2 SDRAM compatible with lion????, is my imac with processor 2.4 GHz Intel core 2 duo with memory 1gb 667 MHz DDR2 SDRAM compatible with lion????

According to the Lion webpage, you would need to add more RAM to your computer and check to make sure you have about 7GB of free hard drive space.
The page can be found here if you need more info:
http://www.apple.com/macosx/specs.html

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

I have iPhone 4S 16GB using v. 6.1.3 & Macbook Pro 2.16 GHz Intel Core Duo OS 10.6.8

Today I added a new entry in my Address Book on Macbook and also edited an entry on my iPhone Contacts. I have tried syncing several times and neither is updating on the other device. Makes me wonder how many other entries are not synced. Any ideas?

Sorry, I did not make myself clear. I am asking for help with the problem of unsuccessful syncing. In the past (after I finished syncing) the Contacts on my iPhone were identical to the entries in Address Book on my Macbook. Yesterday I discovered some entries that did not succdessfully sync. I am asking for help with this problem.

Photoshop CC and Illustrator both not supported by this type of Mac. I have iMac, 10.6.8, 2 GHz Intel Core Duo, 2 G memory. Any solutions to run it on this?

Possible to run either of these on my iMac?
I use OS 10.6.8
2GHz Intel Core Duo
2GB memory

System requirements for individual Cloud Programs
-http://www.adobe.com/products/creativecloud/tech-specs.html#requirements
If what you have is not listed for the program(s) you want to run, I don't think you will be able to run the programs

HT2801 Hello ..im currently using iMAC snowleopard 10.6.8 3.06 GHZ INTEL core i3 4GB 1333MHz DDR3......my problem is that my mac accepts cds and dvds...but the icon does not appear in the finder and desktop either.....more over it does not read any cd or

hello im currently using....iMAC snowleopard 10.6.8
3.06 GHz intel i3

i need some help please....my mac acceppts cds and dvds... my drive is located at the right of the screen.....but no icon appears in desktop and finder......also...it does not read....any cd....does not read any dvd either.....it ejects the cds after a while on its own....also it does not burn any cd.....wen i tried....errors with 0x06 ....medium errors,....show up.....also...i tried reinstalling the mac os.....but when i restart the pc...and...keep C key pressed...the cd just gets ejected.....can someone please help me with this problem?????? i contacted APPLE too.. but they said it must be a software problem......also no apple macbookair superdrive does not get connected to the mac either.....PLEASE HELP!!!!

I cannot receive updates. When I check for available updates, it reads: "failed to check for updates."

I have set up automatic updates weekly. Each week I get an error message. I am unable to manually check for updates either.

Do you have Season Pass for Breaking Bad? You'd need that to see the show in Available Downloads.
Take a look at this Apple doc for more info -> iTunes Store: Download options when purchasing TV seasons, Season Passes, Multi-Passes, movie bundles, music box sets, or individual movies or TV episodes

I received a pop-up advising me that update OSX 10.8.3 was available. I started the download, but it was fouled by something; it did not download/install. Now I ask for software updates and they tell me "no software updates available." Help.

I received a pop-up telling me that OSX 10.8.3 was available. I started the download/ installation, but something interrupted the process and it was not downloaded and/or installed. Now when I ask for software updates, I det the message that "no updates available." What do I do to get thei update?

If the installation didn't finish, maybe OS X 10.8.3 was installed partially, and it doesn't show up because the updater already updated the OS X version to 10.8.3, although it doesn't mean that everything was installed and updated. Just to make sure that everything is updated to the version included in 10.8.3, reinstall it with the Combo installer > http://support.apple.com/kb/DL1640

I have a fairly elderly I Mac 7.1 (2.47 Ghz Intel Core Duo) operating OSX v 10.9.5. At the core level I find two Library folders, one within the System Folder and one by itself with the other core level folders - mostly same content. Is this right?

iMac 7.1 (2.47 Ghz Intel Core Duo w/2GB memory) operating OSX v 10.9.5. At the core level I find two Library folders, one within the System Folder and one by itself with the other core level folders - mostly same content. Is this right or do I have a duplication problem?
The system is slow.

HT203296 No solution listed for 27" iMac running 2.7 GHz Intel Core i5

I have a 27" iMac, Mid 2011.
Model Identifier iMac12,2
The processor is a 2.7 GHz Intel Core i5.
I am running OS X Lion 10.7.3 (11D50)
Boot ROM Version is IM121.0047.B1F
SMC Version (system) is 1.72f2
I have installed Parallels Desktop 7 for Mac Build 7.0.15055 (Revision 740667; March 5, 2012)
I have created a virtual machine running Windows Server 2008 r2 Enterprise with SP1.
I am attempting to enable Hyper-V on this server.
When I attempt to do so, the Add Roles Wizard in Server Manager returns the following error:
Hyper-V cannot be installed
The processor on this computer is not compatible with Hyper-V. To install this role, the processor must have a supported version of hardware -assisted virtualization, and that feature must be turned on in the BIOS.
Parallels take on the issue is summed up on this thread:
http://forum.parallels.com/thread3273.html
Apple has the following information:
http://support.apple.com/kb/TS2744
I have just gotten off the phone with a senior tech support representative from Apple. He is elevating my support request to an engineer, who hopefully will not tell me that this is a Parallels issue, and Apple doesn't provide support for Parallels. I should receive a response in four business days.
I figure it's one of three things...V
VT-X support is disabled on this machine. (Solution, Apple releases an EFI that enables it.)
VT-X support is enabled on this machine, but Parallels thinks it is not. (Solution, switch to Virtualbox?)
VT-X support is enabled on this machine, but the virtual machine is emuilating a processor that does not support it (Solution, read the fabulous manual)
I'd love to hear from anyone who may have a solution to this. If I get more information, I will update this post.
P.S. - Why isn't there an option for Mac OS X v10.7.3 Lion in the "You Must Choose a Community" pulldown menu for this form?
I have run sysctl -a | grep machdep.cpu.features from terminal, and I see that my processor supports VT-X. Yet, my virtual server says my processor doesn't support it. Help?

No solution - but I have the same problem. Using iMac 27 inch 3.1 Ghz Lion 10.7.3 Parallels Desktop 7. All software updates are current.
Also checked with run sysctl command and have VT-X supported.
Within the windows environment I have software that checks for periodic errors. It now shows a bios error "Consider upgrading your bios". This message does not show on the actual WIN PC. Both environments are identical, as I just migrated and have not made any changes to either the PC or the VM.
Hope the additional info helps.

HT4929 I have os x 10.6.8. When I try to update it says there are no updates for my sytstem. I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

I have os x 10.6.8. When I try to update it says there are no updates for my system. I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

Welcome to the Apple Community.
You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not.

When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

HT1338 ok so i know that my computer needs to be updated but I do the software update and it say there are no current updates I have not updated my computer in a long time

ok so I have not updated my computer in a long time and I go to the apple icon in the upper left hand corner of my computer and click on it and then click on softwear updates and it runs and says there are no updates.

You have to buy the next OS X version. Free updates are only available for the version you have. Since you're posting here, assume you want to upgrade to at least OS X 10.6? Or further?
Call the Apple online store, which in the US is at 800-MY-APPLE, or you can also order online from them too. OS X 10.6 is only available on DVD, not download. Get it, install, do Software Updates until no more are available. Done. You probably already have at least 1GB of memory, and some spare disk space to install it. Of course, backup first.
If you want to upgrade to OS X 10.8, see these requirements to see if your system is able to. Note the minimum memory is 2GB, however, 4GB is recommended. Assuming your system can run Mountain Lion, you can upgrade directly from OS X 10.6 to OS X 10.8. You don't need to upgrade to OS X 10.7 as an interim step. OS X 10.8 is downloadable from the App store.
If you want to upgrade to OS X 10.7, after you upgrade to OS X 10.6, call the online Apple store again to purchase a download code, then download from the App store.

When I try opening iPhoto on my iMac (OSX 10.9.2) it says I must first update the application; when I try doing so from the App store, it says there are no updates available. I have not renamed or moved iPhoto which was preinstalled. How to solve?

When I try opening iPhoto on my iMac (OSX 10.9.2) it says I must first download the update; when I try doing so from the App store, it says there are no updates available. Stuck in a classis Catch-22 - any ideas how I might solve the problem?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are n

Similar Messages

Maybe you are looking for