I have an IMAC that runs OS 10.6.7. I use Netgear for wireless. My computer keeps losing the network, so I can't use wireless.

I have an IMAC that runs OX 10.6.7. I use NEtgear for wireless. I have a laptop and Ipod that I use on the wireless. Recently, my desktop computer shows that it is searching for the wireless system (on the router). I contacted Netgear. They talked me into buying another router and their technical contract. Nothing is working. I can plug my 5200 modem directly up to my desktop , and the network is fine, but the wireless, of course, is not plugged in. When I go to connect the wireless, it doesn't work. This is not a computer program per se, nor is it a router program because sometimes it will work. It seems to me that the computer and router are not working together to hold the settings.
I have attempted to download the latest software for my computer, i.e., Imac graphics fireware. Each time I try, it says that the extensions are not valid for my computer.
Any suggestions?
Thanks, Vicki

Imac graphics fireware.
Did you mean to say firmware? You should only install firmware updates when offered to you via Software Update; other than that, whatever is offered is not appropriate for your model.
As for your Netgear router - I have a Netgear and set it up manually on their web interface setup site (the address should be in your manual). Did you call your ISP so they will recognize that there is a router involved? Sometimes my iMac also does not want to communicate with the router; however, my Macbook and printer have no problem. I solved the problem by connecting things this way:
cable from wall to modem > cable from modem to router > cable from router to iMac. The other things are wireless.

Similar Messages

I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive. Then I want to remove iPhoto libraries from iMac. What will happen to the iPhoto libraries that I back up when I run backup in a

I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive to free up space on my iMack Hard drive.
So, say I make the backup today, delete iphoto libraries from my iMac, and then backup my iMac in a week. What happens to the iphoto libraries that are on the external backup drive now that I am backing up the iMac where they no longer exist?
I will have them backed up to a separate second external drive as well.
I'm just very cautious about removing them from the hard drive.
Thanks for helping and understanding my crazy caution!

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old.

I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old so, it's in the newish range. HELP!

Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all. Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac, so I hope somebody can give me some advice.
Cheers

if it's ntfs microsofts filesystem then you need a windows machine to recover them

I am trying to connect to my Wifi Network. It is a Galaxy Nexus. I am trying to connect to this Hotspot. I have an iMac that works fine with my network but for some reason with this computer I cannot connect.

So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!

12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting?

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting on the computer, and how?

One possibility is that you may need to "Upgrade" your Cable /DSL Modem if you have an older unit. ISP's that provide your Internet service in recent years have been switching over from DOCSIS 2.1 version Modems to DOCSIS 3.0 version Modems, which handle the new higher data streaming speeds the ISP's are offering. I would suggest you call your ISP's Technical Support and inquire about this possibility.

Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

You probably don't really need 1080 at 60 for your finished projects but since you're just starting out with Motion, you need to lower your expectations. A long way. 1080 is about 2 million pixels per frame, DV is only about 400,000. That's not just five times as many pixels for the Mac to track; everything in video is exponential.
Explore the training tutorials available by Mark Spencer. You will get an idea of how his super powerful machine reacts with the software.
Adding a light roughly doubles the processing time over flat scenes. Two lights increases processing again. Reflections require processing the lights and then calculating the reflections so add another quarter of the time required for flat scenes. Add camera movement, motion blur, and depth of field and you need exponentially more processing time for every frame. The preload of renders into RAM is one of the cooler features of Motion, as comapred to After Effects, but that takes tons of time, to.
Try working in ye olde DV resolution for a few days. Get to know the software's limitations and what gets imposed by your Macintosh. Step up to 720p/30 and see how things slow down.

HT1444 How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?

How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?

Buswab wrote:
How can I upgrade the OS on my 5 year old MacBook Pro 17. It is currently running 10.4 (Tiger). I have an IMac 27 running Lion but have Snow leopard discs which came with the purchase. Can these be used to upgrade?
If they are the grey discs which came with the iMac, then they will be machine specific and will not work on the MBP anyway. You will need to purchase a retail copy of Snow Leopard from the Apple Store for about $29 and upgrade from that. I presume your MBP is Intel and not G4.
Good Luck
Pete

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can't save the file "TEST.pages" because the volume is read only.

I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problem

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

I have an imac that i use for graphics that keeps freezing up any thoughts

i have an imac that keeps freezing up i use this computer to do graphics for screenprinting and sign work. i use both freehand mx and ia

Hard drive replacement is usually quite affordable.
Apple's drives are a little pricier than ones you buy yourself, but you can be sure you get one that meets all the specifications and is hooked up correctly. On some iMacs, using the wrong drive and/or not hooking up the integrated temp sensor leaves the fans running on maximum at all times.
But once you have your Backups under control, there are few more things on the "usual suspects" list.
Have you simply filled that drive too full?
Are you running out of RAM memory, forcing RAM to be simulated on the Hard drive?
Has there been a RAM failure that has reduced the size of memory available to you?
Are you seeing any Kernel Panics?

I have an imac 2006 running 10.6.8 but I still can't upgrade to Mavericks. Is this model not able to run mavericks or is there a way to download?

I have an imac 2006 running 10.6.8 but I still can't upgrade to Mavericks. Is this model not able to run mavericks, or is there a way to download? Apple says any imac running snow leopard or later.

Again, some proof would be nice
Instead of just making a casual, blanket statement, why don't you just post the actual install procedure here, then.
Also, the 2006 models really do not have sufficient RAM specs to run Mavericks well.
So, I seriously question that your 2006 model iMac is running well on Mavericks.
2006 models could either take 2 or 3 GBs of RAM (you can install 4 GBs of RAM to take advantage of more efficient RAM processing of matched pairs of RAM, but the hardware will only recognize 3.2 to 3.4 GBs of that total RAM). This is barely the needed "real world" "working" minimum of RAM needed for Mavericks to run adaequately.
New iMacs ship with a much better 8 GBs of RAM.
If you can't offer/post proof with an actual install procedure for installing Mavericks on unsupported Macs, then I would suggest you stop posting your assertion that
"I have done it" garbage and post knowledge and info that is REAL and relevant to users of 2006 model Macs that need accurate info about this.

I have an iMac that is not working. It won't turn on or respond to any keyboard strokes. I have a cd stuck in the computer. How do I get it out?

I have an iMac that is not working. The screen stays black when I turn it on and it won't respond to any keyboard strokes. I have a cd stuck in the computer. How do I get it out?

Hello
Try this
plug a WIERED mouse , start up your imac , hold on mouse buttons for 30-40 second at least by chance cd could be ejected
HTH
Pierre

I have an Imac that is a year and a half old and the front of it just fell off and it wont work now. Has this ever happened to anyone?

I have an Imac that is a year and a half old and the front of it just fell off and it wont work now. Has this ever happened to anyone?

If you have Apple care and the problem occured without misuse on your part ... it can be replaced without charge.

I have a macbook thats running lion, and i want to take an iso i have on the mac and put it on my pc, i know i need to reformat it to work on macs, but i need to put it on a pc, please help!

i have a macbook thats running lion, and i want to take an iso i have on the mac and put it on my pc, i know i need to reformat it to work on macs, but i need to put it on a pc, please help!

Creative Cloud Help | Creative Cloud / Common Questions
"Can I use the software I download from Creative Cloud on more than one machine?
Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine."

I just bought a g4 power pc 1gig new in the box. I have an iMac that I had upgraded from Tiger to Lepoard. When I put my Lepoard disc in the g4 it gave me a message to restart but when I try to restart it only powers and repeats the message what do I do

I have an iMac that I upgraded from Tiger to Lepoard. I found a brand new power pc g4 1gig never unpacked and tried to use my Lepoard disk to upgrade the os but I get a restart message but when I power down it stays off and when I power up I get the restart message. If I can't upgrade to Lepoard how do I get the computer to eject my Lepoard disk and go back to the os that was on it? Thank you anyone who can advise.
Peace

When you power up the computer hold down the click bar on the track pad (or the left click on a mouse) and the computer will eject the disk.

I have an IMAC that runs OS 10.6.7. I use Netgear for wireless. My computer keeps losing the network, so I can't use wireless.

Similar Messages

Maybe you are looking for