I have an iMac5, 1 with dual core of 2 x 512 MB. Can I add memory to the original computer to take advantage of the new OSX Mavericks download?

I have an iMac5, 1, with a dual core of 2 X 512 MB RAM. Can I add memory to my original computer in order to take advantage of the recent OSX Mavericks download?

You can:
Maximum Memory
3.0 GB (4.0 GB can be installed, only 3.0 GB will be addressed)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
You will need to replace the modules you now have with one 2 and one 1 GB module or two 2 GB modules.
You cannot install anything higher than 10.75 Lion as your model is not able to run anything higher.
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Be sure to check whether any of your applications will have to be upgraded or replaced..
App Compatibility Table - RoaringApps

Similar Messages

  • I have a MacBook Pro with Intel Core Duo and Snow Leopard 10.6.8. Want to upgrade to Lion to take advantage of icloud. Is there anything I can do without getting a new MacPro?

    I have a MacBook Pro with Intel Core Duo and Snow Leopard 10.6.8. Would like to upgrade to Lion but it requires a minimum of Intel Core 2 Duo. Can I get what I need or do I have to buy new MacBok Pro?

    I also have a core duo MBP with Snow Leopard and it runs perfectly.  There are very few things it cannot do as compared to the faster, newer MBPs, but that is attributable to the CPU, not the OS.  There are some who view Lion as downgrade rather than as an improvement.  If there are important applications that reqire a fast CPU or Lion features that you find essential, by all means get a new MBP.
    I have an aphorism:  Obsolescence is more often a perception rather than a reality.  Besides the silver keys look much classier than the black ones.
    Ciao.

  • I have an imac with intel core duo processor.  Will I be able to upgrade to the new Lion system that icloud is associated with?

    I have an Imac with the Intel Core Duo Processor.  Will I be able to upgrade to the new OSX Lion?

    You need a Core 2 Duo or later to use Lion.  You will need to install Snow Leopard in order to access the Mac App Store to download Lion when it becomes available.

  • I'm trying to download the new OSX Maverick.  It is asking for and administrator password.  I have a common password that I use for all apple interfaces.  It doesn't work here.  What to do?

    New to the community!  I'm having problems downloading the new OSX Maverick.  I come to last step and the system asks for the Administrator password.
    I have not set one up separately from my Apple ID password.  What can I do?

    Reset the password first.
    OS X 10.7 Lion, 10.8 MountainLion & 10.9 Mavericks
    Reset Password using Recovery HD
    Boot into Recovery Partition.
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • I downloaded the new OSX mavericks in my macbook and why I don't have the new i-life and iWork

    I downloaded the new OSX mavericks in my macbook and why I don't have the new i-life and iWork

    Have you checked the Software update page at the App Store?
    And do you have iLife '11 and iWorks '09 installed? Only these versions are eligible to be updated to the new versions.

  • Having problems with InDesign6 and the new OSX Mavericks

    I just downloaded the new OSX and now my Id6 won't open. It starts initializing and the I get the message "InDesign quit unexpectedly." I am in the middle of publishing a book for someone using the "export to kindle" plug-in which isn't compatible with IdCC. Has anyone else had this problem?

    I have just run into the same issue. New Macbook Pro running Maverick and I have Vectorworks 2011. Appple support recommends against partitioning the hard drive on a new MacBook Pro running Maverick. (The first call the apple person suggested it. On a follow up call they strongly recommend against doing it because it can screw up the firmware.) How did doing the downgrade work for you, and how did you do it, external drive, partition? I hate to drop $1300 on Vectorworks when I don't yet need it.

  • I downloaded the new osx mavericks system, and it would not recognize my external monitor.  I have a macbook pro.

    Any ideas on how to get my new osx mavericks that i just downloaded to recognize my external monitor?

    Hello maggiefromloudon,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Best of luck,
    Mario

  • I have a MAC that runs Snow Leopard 10.6.8.  The new OSX Mavericks is free for download and I was thinking about upgrading.  Will my Creative Suite 4 (Photoshop, Illustrator, Acrobat, InDesign) work with OSX Mavericks?

    Was hoping to keep my Creative Suite 4 just a little longer.  Will it be possible with Mavericks?

    Uh uh, I see!
    Also it seems I can use my time machine backup:
    http://en.wikipedia.org/wiki/Migration_Assistant_(Apple)
    together with Migration Assistant. This would work. Thanks
    Now I need to figure out the Windows part. I need a full backup of Windows as well, with all the programs. In particular I need to be sure I can maintain the graphic card drivers.
    You don't want to know how long took for me to find out how the **** I could update my graphic card drivers in Windows on my Macbook pro. Unfortunately there was a lot of misleading propaganda from Apple about bootcamp, saying that the new intel processor would have worked fine with Windows. Sad that everything was a lie. When installing Windows with bootcamp the graphic card program was unable to find and install the graphic card drivers update . Took me 2 weeks reading through thousands of angry posts of disappointed costumers to find out how to do that. I do not want to reapeat this dreadful experience.
    After one year and a half with my Macbook pro I have a system I am TERRIFIED to touch. It is very very fragile, and any little change can destroy everything. It barely works. that's why I am so scared to re-install the OS

  • Anyone use excel/powerpoint/words with the new OSX Maverick?

    I have the 2004 MS Office Student Edition and was told it will not work with Maverick. Will the later version 2008 or 2011 work with Maverick?

    Office 2004 doesn't work with OS X Mavericks because it's a PowerPC application. However, both Office 2008 and 2011 work with OS X Mavericks, so the only thing you have to do is to upgrade Microsoft Office to the latest version > http://www.microsoft.com/mac
    You can also consider other applications like Apple's iWork and LibreOffice. Make a backup of your data with Time Machine and check that your apps are compatible > http://www.roaringapps.com

  • Anyone using FCP 7 with the new OSX Mavericks?

    Has anyone updated to the new OSX Mavericks and is using FCP 7 without problems? Any plugin malfunctioning?

    Nevermind I fixed it. Atleast I think I did, I just set my audio to 24-bit and 9600khz or whatever its called and it sounds clear now. At least I hope that fixed the problem.

  • How to use Real time execution trace toolkit with Dual-core processor??

    hi there
    the situation as follows:
    i have a computer (PC and Laptop) types with Dual-core processors, and am trying to do simulation using Multi-core technology and based on different simulation scenarios...starting from sequantial processing,.......Piple lining processing strategy. so that i can differentiate the time delay between those types of processing based on (Using 1 processor then dual-core processor Computers)
    my question is: As i read through Ni's white papers i saw many notes refer to Real-time execution trace toolkit to investigate the (processing-time , etc) of multi-core processors in processing diffenent algorithms. My algorithms are to be run on 1 computer with dual-core processor BUT, not in real time environments, that is ( No hardware to be connected to my pc) only algorithms running on my pc....
    So, is it possible to use Real time execution trace toolkit  or anyother tools in LabVIEW to show processing-delays and/or anyother timing critical issues without using my application for  real- time hardware.???
    in other words: how to use Real time execution trace toolkit  in non-hardware and/or real-time scenarios???
    please help me in this.
    Any suggestion, comments, feedback.....is absolutely highly appreciated
    thanks a lot in advance
    Labview Lover

    Hey,
    The Realtime Execution Trace Toolkit only works for NI RT Targets.
    But you can use the Desktop Execution Trace Toolkit, just search for it under ni.com.
    Christian

  • Is there no external power option for new MacBook pro with dual core?

    Is there no external power option for a MacBook pro 17 with dual core. Apparently apple doesn't offer one and I can't ind any who does

    Courcoul wrote:
    Given that the stumbling block to more flexible power options is the infamous patent-protected MagSafe connector
    The funny thing is, I've seen loads of cheap "replacement" MagSafe adapters on eBay, Amazon and in local shops. On eBay, they cost (new) about $26, on Amazon I've seen them as cheap as $17!!, against the $80 that Apple charges. And apparently, it's not worth it to pursue the matter, it's been going on for more than a year now.
    made of pure unobtanium and guarded by packs of rabid lawyers, someone is shooting themselves in the foot by making the power bricks so frail that the secondary damaged goods recovery market grows without bounds...
    I really dig that unobtainium reference :-)
    What I've found is that the bricks aren't so frail but the DC cord is! Apparently that's difficult to make resilient, with the characteristics that Apple wanted them to have. Out of every ten broken MagSafe adapters I've seen, only two actually have failed electronics, five have frayed DC wiring and three have a broken MagSafe connector.

  • 1 core only on MSI NEO PLANTIUM 7125 WITH Dual core 4400 +AMD

    Need your help. Im using xp 64bit on MSI NEO PLANTIUM 7125  WITH Dual core 4400 +AMD and cant seem to get the 2nd core activiated even after flashing the bios to Award BOS release 1.5.I also installed the latest driver for the cpu. Im using only the default settings in the bios. Can anyone tell me the correct settings in the bios to make the 2nd core run and also how can  i tell its running im currently using everest benchmark tool for that but unsure its the right tool. Also i have 4 512 kingston ram sticks.
    Thanks
    Jack

    Quote from: jbnetdev on 24-July-05, 18:47:16
    Need your help. Im using xp 64bit on MSI NEO PLANTIUM 7125  WITH Dual core 4400 +AMD and cant seem to get the 2nd core activiated even after flashing the bios to Award BOS release 1.5.I also installed the latest driver for the cpu. Im using only the default settings in the bios. Can anyone tell me the correct settings in the bios to make the 2nd core run and also how can  i tell its running im currently using everest benchmark tool for that but unsure its the right tool. Also i have 4 512 kingston ram sticks.
    Thanks
    Jack
    SOLVED IT !!. You have to flash the bios to the most current version. Then i used ntune software to optimize the system and last iwnet into the bios and selected optimize settings F7 rebooted and fixed !!!

  • I have an iMac5,1 with an intel processor.  For the last month or so, whenever I play a video from an outside source - e.g. YouTube, the picture jumps and breaks-up.  All of my software is up-to-date.  Any thoughts on how to fix this problem?

    I have an iMac5,1 with an intel processor.  For the last month or so, whenever I play a video from an outside source - e.g. YouTube, the picture jumps and breaks-up.  All of my software is up-to-date.  Any thoughts on how to fix this problem?

    You're welcome. As to checking speed go to http://speedtest.net/ and it will choose the closest server for you. BTW, whatever you do, don't click on the robot icon that says "Start Scan" or MacKeeper below that. Only use the speed test in the middle that has the button BEGIN TEST on it. It will run a download speed test first and then an upload speed test. The download test will give a much faster response.

  • I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine

    I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine than using Snow Leopard?

    Which iMac?  Which Macbook?   Both have had several model
    itertations, even within the framework of a Core2Duo processor.
    With that said, I have an early 2009 iMac 24", with 2.66 GHz
    Core2Duo with 8 gig of RAM, and in my opinion, seems to be running
    smoother and faster with Lion.

Maybe you are looking for

  • How to delete the data in update queue and delta queue for Queued delta?

    Dear BWers, How do i delete the delta queue and update queue data before i fill the setup tables for a extraction based on Queued delta. Please help. Thanks Raj

  • LOB Storage in Designer 9i

    Hi, In the help for Designer 9i I found a note explaining the different parameters which can be set in a LOB storage clause. Does anybody know where these parameters can be set for a given table implementation? Regards Bernd

  • Delete Row/Line in a Sales Order document using B1if

    Hi, Is this possible to remove line (row) from sales order? Regards Szymon

  • 0.5 MB program has 832 MB memory usage even before it is run

    I just uninstalled and re-installed LabVIEW 2011. I was hoping this would do something to lower the memory footprint. Alas, it did not make any difference. This is what I see: - When I launch LabVIEW, it uses 94 MB even before I have opened a single

  • Export HIGHEST quality to iDVD

    How do I maintain the crisp quality I see on my timeline? When I export to QT and send to IDVD, it unfortunately looses much quality. Very noticeable around edges of letters. I looked in the manual and it shows a dropdown menu for FORMAT at the botto