I have an Ipad 2 and didn't update the 4.3.3, now when I try to update to 6 it keeps on coming up with an error.
I have an Ipad 2 and didn't update the 4.3.3, now when I try to update to 6 it keeps on coming up with an error. do i need 5 first? and if I do how do I update to 5?
What, Exactly, is the Error Message...
Similar Messages
-
While downloading a book from iTunes, my internet service was interrupted and i didn't get the entire book. Now when i try to download it, i get the message that i already have downloaded it. It hit the download button in the purchased section, and nada! How can i re-download the book?
Hi Peggs,
Try this:
Open your iBooks app on your iPad
Select the Store Button at the top
Select Purchased at the bottom
You will see your AppleID on the right at the bottom, then Redeem, then Support
Click on your Apple ID, and when the AppleID window comes up with the options, Sign Out
Then Sign In again and try redownloading your book
Hope this helps!
Cheers,
GB -
I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?
That depends on why it won't open. Most of the time it means the file is corrupted and unlikely to be recovered. If you saved it right after adding or copying a LOT of layers - then it might just be the layer limit and we can attempt to recover it.
-
I tried to update my ipad air to 8.1, while istalling updates suddenly it went to recovery mode. Now when I try to restore factory settings it keeps restarting again and again.What shall I do in this situation?
This is Linda again. The new iPad actually as not restored on my employees computer. I thought it was working. Message said the device is in recovery mode and can not be restored. I have been at the Apple store for a total of 6 hours and on the phone with support for at least 4 hours. And now the replacement has crashed??? Has this happened to any one else?
-
I have 2 ipads and my iphone on the same icloud account and it wont let me back it up cause I dont have enough space. So I want to move my iphone over to a new icloud account with my new apple id that i made but i dont want to delete the ipads off the old account just move the iphone to the new one. How do I do that I despreatly need help!!!
To migrate your phone to a new account, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep on the phone, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; your other devices won't be effected by this), provide the password to turn off Find My iPhone (if using iOS 7) and choose Keep on My iPhone when prompted . Then sign back in with your new Apple ID to create your new account and choose Merge to upload your data to the new account.
-
if i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?
If you want both iPad to be identical .....
Without connecting your iPad to your laptop, start iTunes. Go to iTunes>Preferences>Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
Now connect your iPad to your Mac and start iTunes.
When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases.
After it finishes transferring all your apps to the Mac, right click on your iPad and select Backup your iPad.
Sync the iPad and eject it when it is complete.
Quit iTunes
Connect the second iPad.
Launch iTunes
Right click on the iPad name on the left side and select - Restore from Backup
Select the backup of the first iPad and let it restore from that backup.
When it finishes restoring - sync with iTunes to transfer all of the apps and any other content that you want onto that iPad
Eject the iPad when you are done.
Check the second iPad and if all of the content did not sync as you wanted - or you want to remove some of the content - connect it again and then choose the content that you want - uncheck what you do not want - and click on Apply in the lower right corner of iTunes. -
Hi..I have just recently got an iPhone and I had installed some apps already but now when I try to install and download any apps it just sits there on "waiting" and will not download.. Im able to erase it but no apps will download now. I have tried logging out of the app store but it still did the same thing. I also tried resetting it and that didn't work either. I've tried everything I can think of but still just sits there saying "waiting." what do I do?
- Maybe here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
- Try redownloading the app directly to the iPod by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?
stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad? -
I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
i used an apple account of a friend to download apps to my iphone, the account then closed, now when i tried to update apps i download it from my account or i buy it using my account, its says that i have to put the password of my friend account, and if i want to update any app i downloaded or buy from my i have to delete it and download it again.
what can i do??As far as I know you should be prompted for the password for an account that 'owns' one of the apps that requires updating.
If all of the apps with updates are linked to your account and that is the account that is now logged in, then you could try a reset and see if that helps : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
i used my visa to buy an album, it appeared and i was listenting to it, now when i try to update my iphone and get apps i cannot, it says my card was declined but yet i receviecd the cd>
Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd
-
I just purchased a mac, I've made an apple id. But now when i try to update my mac. I need to login to itunes stroe.Whenever i try that i can login, then i need to confirm my details. And suddenly the mail adress is no longer valid.
How do I solve this problem?You've posted to the iTunes Match forum, which your questions do not appear to be about. Perhaps you would get better help by posting in the iTunes for Mac forum.
-
Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How do I fix this?
Hi LyfsGD!
Here is an article that can help you troubleshoot this issue with the Apple Mobile Device Service:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Thanks for using the Apple Support Communities!
Cheers,
Braden -
While in Japan on a trip, I updated my iPhone to iOS6. Now, when I try to update my apps, I'm told that my account is not good in the Japan store I must switch to the USA store. How do I do that so I can download and update apps at home in the USA?
Your Apple ID is tied to the US store. Log out of the store, then trying logging back in.
-
My iPod touch is running 3.1.3 and I want to update to 4.2.6 but when I try to update it says my softtware is up to date. How can I update?
I had the same problem with my 1st gen iPod touch and I tried a couple times to update it but sadly you can't because the software on the 1st gens can't support a higher iOS.
Maybe you are looking for
-
When I downloaded the new Firefox about a week or two ago all my bookmarks, and add-ons disappeared and I want you to give them back to me asap?
-
Hi again, Does somebody have a small example for of some plsql code that actually generates plsql code? I' trying something like below but it does not seem to work ... TIA, Stefan CREATE OR REPLACE PROCEDURE TstCodeGen(tbl_name IN VARCHAR2) IS sqltex
-
Interactive selection using photoshop script
How to make a script pause till the user makes a selection and continue again using photoshop script?
-
KM Folders and approval process possibilities
Friends, I have a requriement as below: End user access the portal form and submit. Upon submit it is genearting new PDF file and storing it in KM folder. Now my question is, is it possibe to setup a appproval workflows from KM vai UWLfor different g
-
Setting unscaled with on class extending LinkButton?
I have a class I made that extends LinkButton so that you can put HTMLText in as the label. it works but the background/highlist that shows is way too big because the unscalled with is setting as though it is regular text not htmlText, but I cannot o