I have an IPad 2 and have been printing to my wireless printer for almost a year , all of sudden it states it's going to print and says its sending to that printer and nothing prints. I ran the reports on the printer and it's fine, please help!
I have been printing from my IPad 2 to my HP wireless printer for a year, all of a sudden it's states it's printing but nothing will print, wirless printer ran all programs, everything is fine. Does anyone know what s happening?
Double-click on your home key, find the Printer Control app, hold your finger down on it until the red circle with a white dash appears. Press on the dash, press on the home key and try again.
Similar Messages
-
i have been using my mac book pro for more than 11 months.
.My use is pretty safe as i use it only at my home and do not carry it to office...
my confusion is that shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost....Will spending so much money be worth itLike any other insurance, it's only worth it if you have a problem. I've purchased it on my "high risk" Macs and not purchased on the others. So far I've never needed it.
-
My Canon MP620 appears to be connected, yet every time I try to print something, it says error. I have tried to unplug and track the error, but I cannot figure out why. Please help! this is such an inconvenience!
What Mac model? What Mac OS version?
FYI, this forum is for Apple hardware made before 1999. -
I can not send email from my iPad . Have been using it for over a year, all of a sudden I can only receive email. I have a wifi connection in my home and have a A T &T cellular data plan?
I have a 1st gen iPhone that I just updated the software to 2.0.2
Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
Anyone??? -
I have an iPad 3 model A1416 16GB. It is about 1 1/2 years old. When I opened it today the screen for my password came up and then before I could enter it the screen went blank. I can not get it to do anything now. It had about 24% of charge left. I plugged it into the charger and still nothing. What do I do? How do I get it to work?
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
I've had my ipad for almost a year and I use Face Time every day. It's been working perfectly all the time but now I've upgaded to the new ios6 it keeps cutting the conversation off and we have to reconnect. Anyone got any ideas?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
maybe this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
i have a ipad which has been locked due to the owner claiming it was lost. I have had the serial no. checked and it is not stolen but I can't use it. I have talked to the owner many times who refuses to give me the password or has no idea what password was used.
Unfortuinately there is nothing that can be done.
If its locked its locked. This is a theft deterrant mechanism.
If you could unlock "stolen" ipads then there would be no purpose for the feature.
You will have to convince the owner you bought it correctly, or accept its no lonnger usable by you until the original owner removes the lock. -
my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
I have tried to get a magazine subscription D/L on my IPAD without success for almost a year now. I called the mag company and they had some tech difficulties but I have never received my subscription. I asked for my $19.99 back they told me to contact Itunes. How do you do that?? Itune sent me email today asking to renew subscription period for another year. How do I tell them that I am not getting this subscription. Can anyone give me some advice please?
There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
If you are looking for a refund for your existing subscription then you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
HELP.........I have produced a training module and the reporting at the wont do what I need.
HELP......... I have produced a training module and the reporting at the wont do what I need. I need it to tell me what percentage of the test I have scored which it does but then I need it to tell me which questions I got wrong without giving me the answers.
The seller needs to follow this procedure:
http://support.apple.com/kb/TS4515
If she refuses, then as Tim suggested the iPhone is probably stolen. You'll need to contact your local police department and ask how to proceed.
Regards. -
How can I print a label on the last page of the report in the margin
I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
1. Create a dummy query, like
select 1 dummy
from dual
2. Create a package spec:
PACKAGE pkg_globals IS
totalPages number(3);
END;
2. Create a repeating frame and field for this dummy at the end of the report layout.
3. Create a format trigger for this frame:
function R_1FormatTrigger return boolean is
begin
SRW.GET_PAGE_NUM(pkg_globals.totalPages);
return (FALSE);
end;
4. Create a format trigger for your margin field:
function F_1FormatTrigger return boolean is
pagenum number;
begin
srw.get_page_num(pagenum);
if pagenum = pkg_globals.totalPages then
return (TRUE);
else
return (false);
end if;
end;user8655468 wrote:
I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
set the frame print object on: Last page
Hope this works.. -
I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?
I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you. -
Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back. Please HELP me.
Well, iCloud has nothing to do with this.
Do you have the built-in backup function Time Machine running on your Mac?
See: http://support.apple.com/kb/ht1427 -
Hello,
I've inherited the ReportClass.
public class PReport : CrystalDecisions.CrystalReports.Engine.ReportClass
protected DataSet dataSet;
public override void Export(CrystalDecisions.Shared.ExportOptions exportOptions)
base.Export(exportOptions);
this.Customize(exportOptions);
public override void SetDataSource(DataSet dataSet)
base.SetDataSource(dataSet);
this.dataSet = dataSet;
public void main()
PReport report = myObject.CreateReport();
report.SummaryInfo.ReportSubject = this[CriteriaName].StringValue; <<< exception
in the debug mode, when passing the line, I obtain:
- report.SummaryInfo 'report.SummaryInfo' threw an exception of type 'CrystalDecisions.CrystalReports.Engine.LoadSaveReportException' CrystalDecisions.CrystalReports.Engine.SummaryInfo {CrystalDecisions.CrystalReports.Engine.LoadSaveReportException}
Unable to find the report in the manifest resources. Please build the project, and try again.
I have rebuit the project bat the behavior didn't change.the same exception message I obtain when calling
public override void SetDataSource(DataSet dataSet)
base.SetDataSource(dataSet); <<< here -
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
Maybe you are looking for
-
Message Driven Bean and transaction handling
We are using container managed transactions with MDB's running on OC4J version 10.1.2. We have two database serveres, both running Oracle 10g. The MDB consume messages from the AQ-database through JMS (connected to a JDBC datasource registered as "jd
-
Hello, this is my first post. Well lately I've been experiencing some connection issues with my iPhone 5s. I was on my iPhone just watching Youtube when my iPhone 5s disconnected, I tried to connect again by going to settings> Wi-FI> and then select
-
No hard drive icon on brand new iMac?
Hi, I just received, installed and set up a Refurbished 24 in Intel iMac, 3.06 GHz. All is fine, except that the hard drive icon (by default named "Macintosh HD) does not show up at all on my desktop. The desktop is totally empty, no icon at all. All
-
How do I put artwork on my own podcast in itunes store?
I just created a new podcast using audacity. Got the first episode recorded, exported as an MP3, uploaded to Podbean, submitted it to itunes and got approved. It is now searchable in the itunes store. When I pull it up on itunes on my computer it n
-
Posting pics on iWeb Photo pages
hi, i did some research on the issue i am having but couldn't find any resolutions. i'm hoping someone can help me with their experience / expertise. this is the weirdest thing and perhaps i'm overlooking something obvious? i have taken digital pics