I have an ipad 2 I have tried everything to get it to power on and unfreeze
I have done the Sleep/home button holding it down over and over and still get the same apple logo that will stay on and then finally goes away. I have tried over and over to connect to itunes and it keeps giving me an error that it can not connect. It acts like it will sync but then won't I have even tried to connect to a different computer that uses windows (I have a mac) and it still is giving me an error you can hear it sync the apple logo comes on then it goes off. Is there anything else that any knows to do? All i did was plug it in to charge it and it came on for a few seconds froze up and won't work from then on. Worked fine the day before.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Similar Messages
-
I have tried everything to get itunes to recognize my ipad2. What can I do.
I have tried everything to get itunes to recognize my ipad. What do I do?
Try this, Plug your iPhone back into your computer make sure you exit iTunes, Try going into your device manager and see if your iPhone shows up, if you see it the right click on it and select uninstall. Then restart your computer and watch the system install your iPhone drivers again.
-
I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for
sorry i was typing fast and didnt check spelling and stuff
-
I have tried everything to get my iPhone 4S to ring out loud. It will only vibrate.
I have tried everything to get my iPhone to ring aloud. It will vibrate when someone calls but it will not ring at all. Please help me!! Thanks
You have gone to Settings > Sounds and the volume is set at a high level, you have selected a Ringtone for the sound, and it still does not ring? Try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
If that does not help, visit an Apple store genius bar and have the iPhone tested to see if there is a hardware failure. -
I have creative cloud on my lap top but downloaded the second on my desktop. It is only allowing me to use the trial of After effects and I have tried everything and it still won't let me. It keeps asking for a serial number.
make sure you used the correct adobe id (the one you used to subscribe).
if you did, check for connectivity problems, Sign in, activation, or connection errors | CS5.5 and later
if that fails to reveal the problem,
contact adobe support, https://helpx.adobe.com/contact.html -
MY internet sharing wont work at all have tried everything to get it working
Hey guys it still doesnt work for me i have tried everything here is photo to show what is showing on my screen. it just stays gray and does nothing else
I have tried rebooting it and everything but still no and it is giving me a killer headache please helpWho's sharing network is this?
-
Got a ipod nano for Christmas. Installed already bought tunes on it with my computer at the time which was running Vista OS. Had to buy a new computer in March with Windows 8. Did not buy any songs until April 29th or so...but they will not show in my ipod nano. Talked with a tech and he got my songs into the new computer. However, after we hung up, I tried to download the 2 new songs into my ipod and it would not do it. I noticed that the "cloud" icon was not by any of the songs - only the word: downloaded. I am thinking that since this is a 64 bit computer that I need to do something else, but don't know what. Can you help me? Thank you
Judy1942So you have tried a different USB sync cable and as well as plugging it into all the USB ports on your system? Did you try removing all other USB peripherals (excluding keyboard and mouse if necessary) to see if that did any good?
What happens if you connect it to another PC or Mac?
B-rock -
HELP ME PLEASE!!!!!
Hi,
You can have monitoring latency and hardware latency and this sounds like hardware latency. What interface do you have and have you done a loopback test?
"Even when I record with the track muted, and I have tried this several times with vocals that are dead on time. When I play it back the track is slow. I know they're recording right, because I can drag the entire track forward a little and get it to sync"
Because you can drag the whole track forward it means that your vocal, despite being in time with itself, is not in sync with the already recorded tracks.
Do a loopback test.
Record a transient sound (hi hat is good) make sure it is dead on the beat, use a midi hi hat and then turn it into audio, Route the recorded audio (hi hat) out of your interfave and then back into your interface to record it on a fresh track. Make sure you don't route them to the main outs to avoid a feedback loop.
Once you have both tracks of hi hat zoom in. The second track will be out with the original and this is the latency of your interface. Zoom right in, you can use the timeline to calculate how many samples it is out. My Motu 828 Mk2 is 58. You then offset this in the Recording Sample offset in your Preferences (not in front of Logic right now so I can't remember the exact term).
Once you have set the offset, do the loopback test again, you can keep all the tracks just make sure you're always using your original, smack on the beat track as your original.
Once the re-recorded matches the original you will have compensated for your interface latency. You do not need to change this if you change sample rate or bit depth. Once you have set it, it stays that way.
Try it and see how you go. If you get stuck there are a few other walk throughs of a loopback test on this very forum.
Hope it helps. -
I have tried all the troubleshooting and everything.
Follow these steps please.
#In the location bar, type '''about:config''' and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox, go to the site you want to set as your homepage.
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen. -
My iPhone 4S has lost some of my purchased from iTunes music. I have been unable to get it back. why
Hello mvanderkooi
You would have to wait the 90 days is up before associating it again with that computer. The article below will explain about link your Apple ID with iTunes and devices.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Regards,
-Norm G. -
Can anyone let me know how to make my I phone 5 send receive e-mails on pop 3
Have been in touch with all the right people and there end nothing wrong my I phone 4s will receive but not send now this one will not do anything
No good for my workWith an existing ID, you either have to have a credit card, or redeem an itunes gift card. The only way to create an Apple ID without a credit card, is to follow the directions here, EXACTLY:
http://support.apple.com/kb/HT2534 -
I used all advice on these boards and nothing has worked I am only able to use wep and I have increased it to 128 bit with a 13 chracter password for my router. please help otherwise I have 1 useless device and one that will chew on a data plan. Not at all happy with apple right now!
First if you use WEP. you have to set the route to use the first hexadecimal key and as the password and you enter that key, not the paraphrase you entered to create the four keys. as the password on the iPod. See:
- iOS: Recommended settings for Wi-Fi routers and access points
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have done everything suggested several times. I am seeing more posts everyday from other people having problems
With FaceTime.This is not apple support and we cannot fix the issues with FaceTime. This is a user to user forum. There's a link to Apple support at the bottom of this page.
-
I had my iPad charging on power not the computer and went to use it and it just died. Now I can't restart it. Any suggestions as to how I can get it turned on again.
I would try the reset a few mor times.
Make sure you hold both button down together until you see the Apple Logo.
Maybe you are looking for
-
Matrial Value with freight and BED ECESS And Hecess
I need to know the function of the accrual key and account key in the PO pricing procedure. I am unable to understand the system behaviour. In the case when I check the condition as accrual key required in the condition type that price is not added
-
Is it possible to change artwork associated with albums/tracks?
Hi, Does anyone know if it's possible to delete and/or change the artwork associated with albums or tracks please?
-
What happens if you really cannot remember your security question answers
so i cant remember and i want to just be able to send a reset email but cant find this if there is any way.... let me know thanks Kendra
-
I have two monitors connected to my worksation. I would like to work on an Illustrator file zoomed way in on one and see that same file (a copy of it) on the second monitor at 100%. Is that possible. Thanks, Paul
-
hello can you help me? I need the software of Oracle9iAS 9.1.0.2 for solaris 8 x86. can you tell me where download this software? please thanks for help me