I have an iPad 2, what version os can I use?

I tried to update to 6.0.0 os but keeps freezing up? Any suggestions?

you run 4.3.3 as per your profile.
You should update to iOS5 first. This can be done only via iTunes.
Then you can update to iOS6, either via iTunes or directly from the iPad's Settings 

Similar Messages

  • What version control system you use?

    We are 20 developer and we use bitkeeper as a version control system.
    But we have 4 envirronnement.
    dev/test/pre-prod/prod.
    Sometimes, 2-3 projects are affecting the same packages.
    And different packages version is all over the place since we have 4 envirronnements.
    What version control system you use for packages?
    Would be cool to have a version control system intergrated to our tools, like toad, pl/sql dev or sql developer, is there one for those tools?
    Is the tool you using it doing all you want it to do?
    Have any link for me to check out?

    Hi,
    I recommend SourceAnywhere Standalone to you. It is an SQL-based source control application that provides all of the key features of VSS, plus much more. It is well integrated with Microsoft Visual Studio 6/2003/2005/2008, Dreamweaver and Eclipse. Here is the home page of SourceAnywhere Standalone:
    http://www.dynamsoft.com/Products/SAWstandalone_Overview.aspx
    The Hosted edition, SourceAnywhere Hosted that is delivered as a SaaS application is also available.
    http://www.dynamsoft.com/Products/SAWhosted_Overview.aspx
    You can take a look.
    Thanks,
    Catherine Sea
    www.dynamsoft.com
    the leading developer of version control and issue tracking software
    Message was edited by:
    Catherine Sea

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • We have 2 ipads. What do we need to do to play each other in game center

    We have 2 ipads. What do we need to do to play each other in game center.

    You don't play in Game Center. Game Center is just a tool you use to connect to other users. You first need a game that offers multiplayer action between devices, and then you connect to the other user(s) via whatever instructions the game provides. Some use Game Center while others use some other system, often their own.
    For information on Game Center, if your game does use that, see:
    http://support.apple.com/kb/ht4314
    Regards.

  • I purchased a ipad app (virtual history ROMA) but I don't have a iPad. What i like to do is install it on my grandson's iPad. Can I do that?

    I purchased a ipad app (virtual history ROMA) but I don't have a iPad. What i like to do is install it on my grandson's iPad. Can I do that?
    https://getsupport.apple.com/ServiceOptionAction.action

    Of course you can do that!
    You just have to enter your Apple ID on your grandson's iPad and then conect it to your computer.
    You'll see on your iTunes library that there's a little label on the top left corner of iTunes that indicates you all you have on your library. Well, if you click on that, you'll see there's an option to see Apps. You click on that (remember, you must have your grandson's iPad connected) and you'll be able to see all the apps you have downloaded with your Apple ID.
    Then you have to go to the top right of iTunes and you'll find a button that shows the iPad connected. Click on that and it'll show up your iPad summary. On top of that page, you'll see some options. One of them says "Apps". You click on that one and there should appear the apps you have downloaded. Choose the App you want to install and simply click "Install".
    After that you can eject your iPad and enjoy your new App!
    Hope it helped!!

  • What version of Flash is used for Kindle Fire?

    What version of Flash is used for Kindle Fire?

    The latest Kindle Fire HD is not officially supported by Flash  Player.  Please see this page for a list of all certified devices:
    Flash Player Certified Devices
    That said, some users have been able to get Flash Player working on the Kindle Fire by using Dolphin, a third party browser.
    How to install Adobe Flash on your Kindle Fire HD   
    Get Flash on Kindle Fire HD (video)

  • I can't install the new itunes after downloading the message says "this saftware requires mac OSX 10.6.8 or later. I have a new iphone 5 that I can't use until I update my itunes. What do I do?

    I can't install the new itunes after downloading the message says "this saftware requires mac OSX 10.6.8 or later" I have a new iphone 5 that I can't use until I update my itunes. What do I do?

    You will need to Upgrade to Snow Leopard to get a Compatible version of iTunes to Sync your Device.
    Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • What do i do?  I forgot my ipad password and so i can't use it?

    what do i do?  I forgot my ipad password and so i can't use it?

    Have you ever connected this iPad to your computer? Looked at the manual (it is bookmarked in Safari)?
    1. Use the USB cable that came with your iPad, connect one end to the dock on the iPad, the other end to your computer.
    2. When iTunes on your computer opens, click on the name of your iPad. It will appear on the very left hand frame under the heading DEVICES.
    3. Move to the right and make sure the tab that says Summary is open. Look down on the page and you will have a selection for Restore. Click it.
    4. When asked select Restore as a new iPad, not Restore from Backup.
    5. Wait for the Restore to finish. Do not interrupt it before it is done or disconnect.

  • My Ipad was hacked. I can not use it. What should i do?

    My Ipad was hacked. I can not use it. What should i do?

    Then call Apple and speak to someone in account security. Someone has logged on to iCloud using YOUR Apple ID and used Find my iPad to lock the device. They are now, apparently, trying to collect a ransom from you to release it.
    The device was not hacked. Your account was. If you had set up two factor authentication, that wouldn't have been possible. You should really do that after you get this fixed.
    You may also want to report the extortion attempt to the police.

  • Hi, I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop. Thanks

    Hi,
    I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop.
    Thanks

    It seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
    For info - Using your Apple ID for Apple services
    For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
    regards
    CCC

  • I have DocsToGo premium installed on my iPhone4s; can I use the same app on an iPad mini or do I have to purchase another one?

    I have DocsToGo premium installed on my iPhone4s; can I use the same app on an iPad mini or do I have to purchase another one?

    It shows up in the store as a universal app, so you should be ok to go.

  • I have an iPhone 4S and an iPad2, can i use both chargers in the iPhone and iPad, they have different amperage...

    I have an iPhone 4S and an iPad2, can i use both chargers in the iPhone and iPad, they have different amperage...

    You can use your iPad charger to charge your iPhone 4S. Not recommended to use your iPhone charger to charge your iPad. So, use your iPad charger to charge both.

  • When i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?

    when i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?

    Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.
    Also it would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7).When System Profiler comes up check the Model Identifier.

  • Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

    Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

    We are trying to determine why alert boxes are not modal
    The fix states it's for Firefox 2.0 - 3.7a1pre
    We are using 3.0.6 not the current version of 3.6.13.
    Add-on release notes 2.16.1
    https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
    Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
    Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
    with respect to the window/dialog that issued the alert.

  • I have in stalled Chicalogic and now I can't use anymore Mozilla what can I do to solve this problem?

    I have in stalled Chicalogic and now I can't use anymore Mozilla what can I do to solve this problem?

    According to several websites I've read, Chicalogic looks sketchy at best, illegitimate and spyware at best.
    [http://forums.malwarebytes.org/index.php?showtopic=78653&st=0&p=403467&#entry403467 http://forums.malwarebytes.org/index.php?showtopic=78653&st=0&p=403467&#entry403467]
    Registry cleaners have very little good use, and usually end up damaging more computers than they fix. I'd recommend uninstalling the software.
    That being said, Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
    A few other basic trouble shooting things you can try is this:
    Run all Windows Updates, install all needed service packs, etc.
    Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.

Maybe you are looking for