I have an ipad 3 and got a Rode IXY mic. mY ipad doesn't even detect it when it is plugged in. anybody else have this probelm? I have checked settings, everything is on and updated.
I have a Rode IXY mic, with Rode Rec app. the ipad won't detect the microphone when it is plugged in. I've updated all apps and systems and made sure the privacy settings were letting the Rode Rec app access the microphone. Anybody else have this problem?
Hello,
Try wiping the iPad and then starting again. (Don't forget to back up first!)
I had that problem it was software.
Similar Messages
-
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
-
Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?
Hello, try kguy's solution here...
https://discussions.apple.com/thread/2332457?start=0&tstart=0
First, Go to System Preferences, keyboard, and click on the Keyboard tab
Make sure that the checkbox by "Use all F1, F2, etc, keys as standard function keys" is NOT checked.
Next, click on the Show All button, and select Bluetooth. You should see your Apple Wireless Keyboard listed on the left side of the screen.
Click once to select it, and then click the gear icon at the bottom of the box, and choose Disconnect.
Power off the keyboard by holding down the power button on the keyboard for a few seconds until it show "keyboard Off on your imac screen, then turn it back on again.
The device should appear once again in your bluetooth list.
Try out the volume control buttons now, and see if that cleared things up -
I upgraded to Mavericks. Everything went smoothly. But now Excel is giving all of its warnings in what I believe is Chinese. As an example I update a file, close it, and the warning message about saving is in Chinese. Anybody else encounter this?
If you don't get an answer here, ask in the forums devoted to MS stuff:
http://answers.microsoft.com/en-us/mac/forum/macexcel -
I have 8 mbs of broadband but it does not seem to be adequate for using Facetime or Viber. I lose the connection via Facetime every few minutes and Viber doesn't work at all. It always says that the network connection is poor yet it's showing a full signal on the phone. It was a lot better before the last software update. has anybody else had this problem.
Regards,
KevinCS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O. -
for the second time in a yearish,following download my computer crashed and burned.four attempts to reinstall maverick resulted in a semi-working computer but my back up disc trashed and working files seem lost.Anybody else get this problem and how regularly or is it a selective event?
gerryIt is not safe to publish your email address in an open forum, so I've asked the hosts to remove them. Your post is here for anyone to see and if someone has a solution, they will post an answer, so there is no need for an email address.
-
My iPhone 4s has suddenly stopped making a noise to tell me new emails have arrived, this was after an ugrade to IOS 7.1.2.
It worked fine before and I didnt change anything but it just stopped dinging when I got a new email.
I have checked Settings-Sounds & Settings-Notification Centre and everything looks fine.
It worked ok a couple of weeks ago but not after the latest update - anyone know why?Thanks Lawrence
I omitted to say that it only occurs when the screen is locked - if I'm looking at something on my phone when an sms or email arrives, the phone 'notifies' me with a sound but doesnt do it when its screen is locked. Email messages and sms's (texts) still arrive but I get no sound to tell me they have.
The MUTE swith is in the correct place and I have tried resetting the phone with the Home and Sleep buttons several times, still to no avail.
I have noticed on the forums that many people are suffering or have suffered the same problem but Apple are never forthcoming, of course, -
TS2621 Can't send mail . Have checked settings and they seem right.
Can't send email. Have checked settings and they seem right . Any suggestions?
Hi Friend,
Which kind of account are you using?
If you are using a business account (for example [email protected]) you must set POP account info properly, filling all the blank fields (name, email address, description, password, Host Name, user's name, SMTP). Just one field blanked causes error in sending/receiving.
If you are using a default account (iCloud, Yahoo!, Hotmail...), fill all the blank fields (Name, Email account, Password, Description) and sign in.
If not works, delete the account and sign in again
Hope it will be helpful -
Since installing Mavericks on my iMac my outgoing talktalk mail has stopped working. Incoming talktalk mail works fine as does iCloud outgoing and incoming. I have checked settings and these all appear ok. My MacbookAir without Mavericks continues to work fine with the same talktalk router etc used with the iMac.
Has anybody else had this ?
ThanksMail/Window/Connection Doctor - if a server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages -
Since installing the dreadful Io 6 my keyboard and lock no longer click. Have checked settings and reset what next? Ver disappointed with apple.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
My mail account from icloud will work if I only disconnect my wifi in my iphone and only use internet plan from my carrier. Anybody else with this problem??
I've been having the same problem since iCloud appeared and complicated an otherwise trouble-free system. Doubling frustrating is that iCloud duplicates my .Mac account so I get two of everything in my Inbox. I turned off iCloud and now mail at least goes out but I can't delete the duplicate account.
-
My iphone 4 s has been losing service all day and freezing is anybody else having this prob its even to the point i cant hold a phone conversation without it cutting off
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
MS exchange account on my iPhone and iPad doesn't capture sent mail when sent from iPhone or iPad! Everyting else seems to work fine. Can someone pleasse help?
iPhone and iPad use a different way of accessing the server.
I don't know the exact details, but we are using Zarafa instead of Exchange and have the same problem:
iPhone and the likes can connect to Zarafas z-push interface, which is some identical interface to the native Exchange interface, while the desktop e-mail application tries to interface with the web front end (via http) of the server.
These are completely different setups and it depends on the actual installation of the server to get this going.
So, you will most likely need different access parameters for the desktop - and the web mail feature has to be enabled on the Exchange server.
In my opinion using the web mail interface is just silly. On the other hand, the native protocol has less features comparedto the web front end, so you are somehow stuck with sins of the past.
Good luck! -
On iOS 7 when I try to set a new wallpaper why can't I scale and move my photo? Why does it chop off the heads? Anybody else having this problem?
Hi CollBA,
See More Like This to the right. This issue has been discussed several times on this forum.
Cheers,
GB
Maybe you are looking for
-
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!! I looked in console and its saying that it may be because of Sophos Anti-Virus
-
Excess Material Consumption Report - For a Particular Period
Hi, For a particular Time Period, say 30 days, I require excess material consumption report. This report is for the materials ( say ROH, or HALB) that are confirmed through co11n. Taking MTS into consideration with Strategy Group 40, please suggest a
-
Hey All, I am using CR2008 on a winXP 32 machine. I had built a report in CRX and it was was showing 6 pages in print preview and it was 6 pages when I exported to PDF. After I converted it to CR2008 it still shows 6 pages in p
-
Using an array of strings to name an object
Hey everyone I have an array of strings that are supposed to be the names of each panel in a grid, but I dont know how to use the string values to name the panels. From searching the forums almost everything refered to using a Map to do this, but I s
-
Hiding button after successfull call to databse procedure
Hi, This is my first post and my first APEX app. I have a submit button that calls a database procedure passing parameters from the form. The procedure then updates the database record and the page shows the update which means its successfull. Howeve