I have an iPad and can't connect to my network.

Family can come over and bring their iPads and it works fine.  I can take my iPad to their houses and it works fine.  It is something with my iPad on my network.  Its an Arris router I lease from my cable company.  My macbook works fine, all three Iphones work.  I have tried all the tips mentioned on apple.com.  Any help would be appreciated.
Johnny

Have you tried Settings > General and reset the network, then reenter the network information?  Plus, power cycle the router off then on after a couple minutes, turn the iPad off and after a couple minutes back on.
That way give the router time to recapture an IP address and stabilize, then the iPad to capture its IP address from the router.

Similar Messages

  • I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

    I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

    Wmorlac wrote:
    I have the new IPad and can't connect via bluetooth to any of my apple devices...
    Correct... See Supported Bluetooth Profiles Here...
      http://support.apple.com/kb/HT3647
    Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

  • I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

    I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

  • My iphone4 will not connect to my network.  My iPad and my wife's iPad and iphone4 all connect to my network.  I have tried the solutions in Apple trouble shooting site. Still no connection.The "wheel" turns for 2 sec. then stops w/o connecting?

    My iphone4 will not connect to my network.  My iPad and my wife's iPad and iphone4 all connect to my network.  I have tried the solutions in Apple trouble shooting site. I even tried the freezer option. Still no connection.The "wheel" turns for 2 secOne then stops without connecting.  Anyine have a solution to this issue?

    I have an AT&T contracted iphone 5. Cannot send mms to anyone but other iPhone users. If you search the Internet, you'll see that the problem is everywhere...both the carriers and Apple are actling like the problem belongs to the other, or feigning any knowledge (which is kind of funny since the no MMS thing was in an ios6 beta that was released awhile ago, so I KNOW apple knows about it). No, I'm not running a beta (obviously, I just got my iphone 5).  Awesome. Have a great camera on this thing, but cannot send OR receive MMS from anyone other than other iphone users. Gotta love it.

  • I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    Try changing the channel in use in case you're getting interference. 
    If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
    mrtotes

  • Upgrading to xcode and can't connect to the network

    Hi! I use a C++ library in my application which connects to the network (I suppose it uses sockets). I've been using it for months and I was using xcode 3.2.4. Now, I just had the great idea of upgrading to xcode 3.2.5, and I found out my application was crashing with the error:
    If you are encountering this problem running a simulator binary within gdb, make sure you 'set start-with-shell off' first. 3.2.5
    Ok, couldn't solve it, so went back to 3.2.4, as suggested somewhere. The application is not crashing anymore, but now the library can't connect anymore to the network. Tried to rebuild it (I didn't write the library but I have the sources) and use the new library, but nothing. Still the library can't connect to the network. I tried with every simulator.
    Any idea what there could be wrong and how I may be able to solve this? Can I somehow delete manually everything related to xcode and the simulator and try to start all over again?
    Thanks!

    I've been able to temporarily solve this problem by removing the entire Development directory and installing again xcode 3.2.4. Even with xcode 3.2.4 however, the same happened, and I had to do this procedure again. Now it seems to be working correctly, but it seems something very strange has happened. Hasn't anyone experienced anything similar?
    Thanks!

  • I have 2 iPads and neither are connecting to the store

    We already have one ipad2 and have bought another - I have set these both up in my name and same payment details but using different apple IDs and passwords.... They were both working well this morning allowing FaceTime and app purchases but both have stopped working when trying to connect to the App Store. I have rebooted both and restarted the broadband router ( although I knew it could not be this as the android tablet we have was working fine and safari on the iPads were letting me connect to the net.) please advise?

    Maybe something in one of these two articles will help.
    Can't connect to the iTunes Store - Apple - Support
    Best Fixes for 'Cannot Connect to iTunes Store' Errors - iPad Insight

  • I have a Kindle and can't connect the WiFi. is this a Firefox problem?

    Ehrn I try to connect I get the message that Kindle can't connect.
    Also what is the router?

    I'm unable to connect to Kindle & purchase books using the Kindle Windows PC app. as long as Mozilla 4.0 is installed on my PC.
    I wasn't able to "Register" my PC (Asus Slate Eee 121). The app. kept giving me a timeout message. The app. had actually been pre-loaded by Asus.
    After going through several install/uninstall cycles with several pieces of software, checking the registry, etc., I finally uninstalled Mozilla 4.0 and cleaned the registry of any trace.
    After I removed Mozilla 4.0, the Kindle app. works fine with IE. IE isn't my preferred browser... . Anything to do with protection levels?

  • I have an MX882 and can't connect to computer Windows 7. Not wireless. Please help!? Thank you

    I have no disc- can't get my MX882 to attach to PC with Windows 7. This is an older DELL and  not a wireless computer. Appreciate any help where to locate download. Thank you!

    Hi KMV57,
    Windows 7 compatible drivers for the PIXMA MX882 can be downloaded from the Canon USA website.  The following link will take you to the Support and Drivers page for the PIXMA MX882:
    PIXMA MX882 Support and Drivers page
    Once on the initial download page for your printer, please do the following:
    1.  Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2.  Next, please click on the red arrow next to the "DRIVERS" section and click the MP Driver file.  When you do, another page will appear giving details of the file you are about to download will appear.  
    3.  Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button.  After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver.  The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded. 
    To download the associated software for the printer, please follow the steps above, except for you will want to click on the word "SOFTWARE" instead of "DRIVERS" in Step 2 to display the software for download.
    Hope this helps!
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • TS1398 I have an IPad and can't print using my HP printer. I have downloaded the eprint app.It wont recognize the printer

    My ipad wont recognize my hp printer any suggestions on what to do?

    You cannot sync the two devices together. You can keep the two devices in sync by using iCloud and some of the available settings on both devices. Go to Settings>iCloud and you can turn on Reminders , Calendars, Notes, Safari Bookmarks, Contacts, Photo Stream, Mail, Keychain, etc.
    You can go to Settings>iTunes and App Store>Automatic Downloads and turn on apps, songs, books and updates to keep all of those items in sync as well.
    But why don't you explain exactly what you mean by syncing the two devices? What do you hope to accomplish?

  • Can't connect to any networks while aboard

    Hi, I am on holidays in Ireland and can't connect to any networks here. My mobile is a galaxy mini s4.
    Any help much appreciated!
    Thanks
    Tara

    Did you enable roaming on your a/c before you left? You may still be able to via your online a/c. Buying a roaming pack doesn't in itself enable roaming. See Roaming – Everything you need to know!.

  • I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

    I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

    Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
    You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

  • Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID??  For example, I have an IPAD and a Macbook Pro.  Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

    Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID??  For example, I have an IPAD and a Macbook Pro.  Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

    I have also tried changing the contact emails(you can contact me by) in Facetime(diff email for IPAD and Macbook Pro).  Facetime tried the call, I see the accept buttom appear and it goes away as the call never connects?   Any ideas??

  • I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen

    I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen.

    Go to System Preferences>Sound>Output  and make sure that you selected the right output. I think if yo use HDMI you might not be abe to select another output.

  • I have an ipad and it's been refusing to connect to the wifi lately no matter where I go, anyone know how I can fix it?

    I have an ipad and it's been refusing to connect to the wifi lately no matter where I go,
    it used to work and then all of a sudden it wont.
    i type in the password and it comes up with 'unable to connect to wifi'
    anyone know how I can fix it?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Maybe you are looking for

  • BOE XI 3.1 (SP2) and BW

    I have installed SAP Integration Kits XI 3.1 + SP2 on my BOE XI 3.1 machine.I am in the process of configuring the SAP Authentication. According to Ingou2019s document ( BusinessObjects Integration Kit for SAP - Installation and Configuration, page 1

  • Hotmail

    Why can't I access my Hotmail account through the VersaMail application?  Accessing through the web is too slow. Post relates to: Treo 680 (AT&T)

  • Dual G5 Powermac - CPU chirp/whine after 10.4 upgrade

    At home, I have a Dual G5 1.8 GHz Power Mac. At work, I use a Dual-G5 2.0 GHz power mac. With both of these machines, after upgrading to 10.4, I can hear the machine making high-pitched noises. The Dual-1.8 GHz machine `chirps', while the Dual-2.0 Gh

  • Firewire 400 or 800?

    So, I just purchased a Samsung camcorder, but only came with USB cable. From what I read from this forum is that you need to have the firewire cable to import video from camcorder to Mac. What exactly is the difference between Firewire 400 and Firewi

  • Customised IDOC report - INVOIC01 - to display required segment values

    Hello Friends, We have a EDI Interface from a Telecom application to our SAP Payment system Interfacing INVOIC01 . I have a requirement to develop a report to send out a list of all IDOCS loaded/failed on SAP with the segment values segregated . for