I have an iPhone 4 and an iPod 4th gen linked to the same email address and apple ID. I am trying to set up a new email address for the iPod so a family member can use it but it doesn't want to recognize the new email account. Where am I going wrong?
I have an iPhone 4 and a 4th gen iPod linked to the same email address and apple ID. I am trying to change the email address on the iPod so a family member can use it but when I do it says it doesn't recognize the email address. Where am I going wrong ? I just want them to be able to iMessage and email without having to use my email address.
The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.
Similar Messages
-
my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.
Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.
-
i have a iphone4s and an ipod 4th gen, they both share same itunes acc, the ipod has its own email but when people try to FT it also rings on my phone, how do i stop it ringing both devices
That's because you're using the same Apple ID on both devices. On your phone: Settings>FaceTime>You Can Be Reached at>Remove your Apple ID.
-
I installed Snow Leopard and have the latest version of iTunes. However, when I connect my iPhone 4S, it charges and iPhoto opens, but iTunes doesn't seem to recognize the iPhone. It simply doesn't appear in the left column. What gives?
http://support.apple.com/kb/TS1591
-
can i save a podcast without taking up space on nano 6, i keep getting error message space is used up but I don't want to lose the podcast episode for the future
Sorry to be such a moron with this, but I just don't have much experience with this iPad. I have had it for over a year and I just keep adding stuff to it and it has worked great. Now that the memory is used up, I am trying to figure out how to free up space and not lose what I have paid for.
So, Step 1 is complete, as I have "Transferred" all of the purchases.
What is Step 2? I unchecked the concert on the iTunes library, did a sync, but it's still on my iPad.
Thanks again for the help!!! -
I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter). I've downloaded and run airport utility, but it seems to have a hard time finding the time capsule...maybe one out of 10 times it will find it.
What's more, when I look under network infrastructure under the control panel, it shows my Broadcom ADSL centurylink Router...so I'm wondering if my modem/router combo is overriding the router function on my timecapsule and the time capsule is not being used as a router...
Any help much appreciated!In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss. -
My ipod 4th gen went onto a blank white screen and turned off. what should i do?
My iPod 4th gen was dead so I charged it, the apple sign appeared and stayed on the screen for about 10 minutes then went onto a blank white screen and turned off. Now I can't charge it and it has already happened multiple times. what should I do? I also don't know which iOS operating system it is, does that matter?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hello. my ive been trying to restore my ipod touch 4th gen because it was frozen on the apple logo. i got it to go to the connect to itunes image. i plugged it into my computer to try and restore. i open itunes and it says "you must restore this ipod to use itunes". i click ok and then i accept the terms. after that it shows that it will take 41 mins to restore, but then it says "we connot restore this, there was a problem. it also says to check your network connections or try again" my network connetions are on and its still not working! please help
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
Cannot restore ipod 4th gen without updating to ios 4.2 and cannot do that
My son cannot remember his passcode to his new ipod touch 4th generation. I go into itunes to do a "RESTORE" and it won't restore unless I update to the new ios 4.2 software. When I try to update, I get the "network connection timed out" error. It will never update. I have disabled every bit of security on the computer, removed and uninstalled all anti-virus software, removed firewalls from windows and the router, unplugged and replugged in the modem and the router to do a hard reset, tried creating a new user account in Windows to see if that helped and it gave the same error. I was told by Apple that I must not be able to do it for some reason and I have to go to an Apple store to have it done. That is ridiculous that they can't even figure it out. My son just wants his ipod restored so he can use it and I just want to be able to do updates.
i fixed mine!@#!@# all i did was closed kaspersky and it worked i don't know what your problem is tho since u uninstalled your anti-virus
most people disable there anti virus but the anti virus doesn't fully close like kaspersky
i hope u fix your problem -
My movie program wont recognize the itunes format .m4a. Any suggestions? I downloaded a program to help convert it but didn't work.
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
-
PLEASE HELP ME!!!
Apple will exchange your iPod for a refurbished for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following may be less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
ipod
If you're using iTunes Match, be sure to set Use Cellular Data to On in Settings>iTunes & App Stores in order to access your music over 3G. If you're using home sharing to stream music from another computer/iTunes library in your home, this music is only accessible when you're device is connected to your home wifi.
-
printer assistance
Turn the printer off then back on. If that didn't help, open System Preferences > Print & Scan (or Print & Fax) for a prior Mac OS X then select the Print ab.
If you see the printer on the left, select it then click - (minus)
Now click + to reset the printer.
Might also help to clear the queue.
Click: Open Print Queue
Delte any files in the list then click delete. -
IPod 4th gen in recovery mode and will not restore
My iPod 4th Gen has gone in to recovery mode and it used to say plug in to iTunes, so I do and the computer says it has detected that an iPod needs to be restored so I try and restore it, it starts but when it says restoring iPod the iPod disconnects from the laptop and an error comes up saying the restore can not be completed error 40. I have tried it on two other computers including an apple mac book and still no luck. I've tried searching the Internet for answers but nothing has helped my iPod wont even turn on anymore. I am currently in Afghan and i brought the iPod to use out here i had it 2 weeks and it hasn't worked since and I can not call Apple. PLEASE HELP!!!
Did you try everything here:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Can I have 2 different countries billing address under one Apple ID? I mean 2 countries credit card info for payments at the same time under one Apple ID.
I do travel very often to overseas. I'm having problem with few apps that can not be updated when I'm using another countries store. I do have 2 countries billing address. So when there is an update I need to switch my county & billing address for few selected apps. I was wondering if I have option to add both countries as my billing address that would be great under same Apple ID. Is this option available?You can only have one credit card and billing address on your account at any one time.
Maybe you are looking for
-
Manufacturer plant Partner not defaulting in PO
hi all according to SAP Help, the setting for checking manufacturer plants are supposed to be the following: 1) Vendor with account group001 and partner roles LF 2) Manufacturer with account group MNFR which, unless I am missing something, allows pa
-
Ipod mini plays broken metallic sound
it started when I downloaded the latetes version of itunes, 7.0.1. Also, the podcasts show in playlist but they won't play. First time problem was solved by itself, now I can't make it work again...
-
How do I get rid of MY Start by Incredibar
When I open new window I get a My Start page and junk advertising. I have tried to delete through remove program and deleted a strange "user" file. Search search.does not find an other files with search. I did search with "ib" as suggested on some fo
-
Are there any STP sound effects usage restrictions?
Are the sound effects in STP free to use? Like could I use them in a feature film if I wanted? A website? Anything? I'm not asking about other companies- I'm talking specifically about the sound effects that come with STP. Thanks!
-
Unable to save images from photoshop
Using the external editor linked to Photoshop CC 2014, images from Aperture show up in Photoshop for editing. But after making changes, and saving the file, Aperture doesn't get updated for any of the changes I made in PS. Any suggestions on how to