I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G.   Thank you

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G.   Thank you

This crap just happened to me this morning where I was sent 90% data plan threshold warningfrom AT&T (while sleeping at 7:09am) then 5 minutes later getting the Overage data plan warning from AT&T.  This is all while I'm asleep right next to my phone plugged into a (non-Apple) dock on my clock radio.
Android has a limiting feature, why can't the "smart" guys at Apple learn from this??

Similar Messages

  • TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

    My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have a brand new ipod touch and when setting it will not connect to my home wifi, even though it is working with all other devices

    I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.

    What happens when you try to connect?
    Error messages?
    Does the iPod see the network?
    Have you tried other networks?
    See:
    iOS: Troubleshooting Wi-Fi networks and connections

  • I have been using firfefox 3.6.8 since release and have had no problems running Windows 7. Today, I am unable to print anything from the internet using firefox. IE 8 as well as all other programs print fine. Any suiggestions appreciated. Thjansk.

    I am unable to print using Firefox 3.6.8 starting today. All other programs print fine including IE8. I am using Win7 64bit. I did not change any configurations and voila - today the problem started.
    Thanks for any help.

    See http://kb.mozillazine.org/Problems_printing_web_pages and [[Printing a web page]]

  • After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

    After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application  .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

    Hey ahmedfromtanta,
    Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • What external drives work well with a late 2011 MacBook Pro?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also should I avail myself of something that works with Thunderbolt or Firewire?

    What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also, should I avail myself of something that works with the Thunderbolt or Firewire connections?  I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

    Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
    http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
    There does seem to be a lot of prep to make it work:
    "1. Preparation to install your new shiny SSD
    1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
    1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
    1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
    Also in those reviews:
    " Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
    Personally I only deal with OWC:
    http://eshop.macsales.com/shop/SSD/OWC/
    They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
    Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
    When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
    As far as value for price:
    http://eshop.macsales.com/item/OWC/MES3FH7500G/
    500 GB for $130.
    However as far as reliability is concerned:
    http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
    http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
    So sudden power loss is an issue with SSDs.
    Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

  • My ipod classic is not recognised by itunes any more and gives a message, this disc cannot be repaired by this computer. Works well in all other ways, anyone else have this problem?

    after my most recent update, my ipod classic will no longer sync with itunes, and I get a warning message that"this disc cannot be repaired by this computer", anyone else have something similar? The ipod plays well otherwise, I just can't sync or load new music

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • I updates my iPad with the latest iOS and despite backing up all the information prior, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently requires assistance. Thank you!

    I updated my iPad with the latest iOS and despite backing up all the information prior via iTunes, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently require assistance. Thank you!

    Hi Sam,
    I understand where you are about being your own IT department, it can be overwhelming ...
    What drives to buy depends an awful lot on how you will use them, what your budget is, and your preferences.
    In the case of your DP Powermac, for online storage used primarily for editing, I would add one or more internal drives first. Look for drives that are at least 7200rpm and have at least an 8MB cache. 10,000rpm/16MB cache is even better, but more expensive. Seagate Barracudas have always been good choices.
    For backup purposes, I'd pick some good external FireWire drives; you can also use these for online editing, lots of people do. Your Mac has both FW400 and FW800 ports - either kind is fine but if you get drives that support both, you would want to connect them to the FW800 port for the added performance.
    In my experience, the Lacie d2 Extreme drives have been very very good. In fact I have 3 of them daisy-chained off my iMac G5 right now and they work flawlessly with FCE. Weibetech and Granite Digital drives are further upscale in performance and price. RAID configurations would be even further upscale. Do stay away from consumer level hard drives, however ... the Western Digital MyBook series & no-name drives come to mind ...
    Don't use a FireWire hub for your external drives, it's just asking for trouble.
    ps. And thanks for your nice comment about me. I'm happy to help, as are other folk in the forum.

  • ITunes does not recognize my CD/Rom Burner. The CD burner works with all other applications on my computer. How do I correct this?

    ITunes does not recognize my burner. The burner works perfectfully with all other applications. Anyone have any ideas?

    Hi scotty2hotty1972,
    Thanks for using Apple Support Communities.  This article has some steps you can try if iTunes isn't recognizing your optical drive:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/ts2308
    Cheers,
    - Ari

  • Hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success

    hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?

    Try here:
    iOS: Not responding or does not turn on

  • TS1538 my 4th generation ipod touch is not recognize in itunes. it just displays the updating circle spinning then shows the apple then goes back to spinning. it is unusable now, what can I do

    MY DAUGHTERS IPOD TOUCH HAD NO AVAILABLE SPACE LEFT IN MEMORY SO WE TRIED TO CONNECT IT TO ITUNES TO SAVE PICS TO MY LAPTOP AND THEN UPDATE IT BUT ITUNES SAID IT DID NOT RECOGNIZE THIS DEVICE. SINCE THEN, IT IS ONLY DISPLAYING WHAT I WOULD SAY IS THE LOADING CIRCLE SPINNING AROUND AND AROUND THEN SHOWS THE APPLE LOGO FOR A SECOND THEN GOES BACK TO THE SPINNING CIRCLE. IT CANNOT CONNECT TO ITUNES NOW BECAUSE ITS LOCKED BUT WE CAN'T GET THE MAIN SCREEN TO OPEN IT WITH THE PASSWORD...PLEASE HELP

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My sons ipod shows the apple sign and then occasionaaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on

    my sons ipod shows the apple sign and then occasionaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on.. He has tried charging it.He also held down the sleep/wake button and the home button at the same time to reset it.  we need help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
    Message Edited by bleakreserve on 02-3-2005 06:34 AM

  • HT2188 I have an iphone 3GS that keeps getting the message "charging not supported by this device" Dismiss I have tried other usb adapters, car chargers, and directly hooked to the computer and still get the error message. Software is up to date as well.

    I have an IPhone 3GS that keeps getting the message "charging not supported by this device" Dismiss. I have tried several different ac adaptors, car chargers and even directly connected to USB on computer and still get the same message. Software is up to date as well. Help!

    Clean the dock connector with a soft dry brush.    

  • Bought Garageband for iPad1 and it worked like a dream. Then I upgraded my system to 4.3 and now Garageband doesn't work. How come? When I try to start it just flickers and then goes back to show the symbol for the app.

    Bought Garageband for iPad1 and it worked like a dream. Then I upgraded my system to 4.3.5 and now Garageband doesn't work. How come? When I try to start it just flickers and then goes back to show the symbol for the app.

    I understood what you were saying. You did type 4.3.5 in your post. Several other things to try.
    Close all open apps like I described above. Just tap the home button first so that you will be able to access all of your apps. Close every single one and then restart again.
    You can also delete the app and download it again. As long as you use the same Apple ID and password there is no charge to download it again. Tap and hold down on the GarageBand app icon until it wiggles. Then tap the X to delete it. Download it again.
    Reset the iPad. Hold down on the sleep and home buttons at the same time until the Apple logo appears on the screen. It takes about 10-15 seconds. Ignore the red slider shut off bar. When the Apple logo appears you can let go of the buttons and the iPad will reboot.
    The final thing to try is to download another app - any free app. Sometimes that seems to reset something on the iPad. You can always delete the free app if you don't want it.

Maybe you are looking for

  • IPhone no longer syncs playlists in the same sort order as iTunes

    iPhone 4 no longer syncs playlists in the same sort order as iTunes after iOS5 upgrade.  Any suggestions?

  • Windows 2008 Server R2 - Service Pack 1 Failed to install

    A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64.  The update failed to install after 3 attempts using the Windows Update manager.  After the third time I checked the system properties which states that SP1 is installed, yet

  • How to store attachments in CAF?

    Hi, all.   I implemented a wd app to let user upload some attachments and I wanted to store the attachments   with CAF. In my wd app, I declared a wdresource to ctach the uploaded attachment. What type should I use for my BO`s attribute to store the

  • MSI AT Radeon X1300 and LG W3000H FPD half resolution problem

    Hi All gurus, I have a big trouble. I have bought an LG monitor, 30" with DVI-D dual link interface.  I have an MSI, ATI Radeon X1300 based board.  That board is supposed to support the native 2560 x 1600 resolution, but it does not.  All I get the h

  • Error in Custom Rule EVALUATE_AGENT_VIA_RULE

    Hi, I am working on a workflow and have created a custom rule for a workflow. When I simulate this rule, it returns 1 users but when workflow is triggered, Possible agents and Actual agents are blank. i am getting error in Rule EVALUATE_AGENT_VIA_RUL