I have an iphone 4 and my screen glass is cracked the screen itself is fine its just the the glass. im with vodafone and have a 1 year warranty could i get my screen replaced free with my warranty.
I have an iphone 4 and my screen glass is cracked, the screen itself is fine its just the glass. Im with vodafone and have a 1 year warranty, could i get my screen replaced free with my warranty?
No, damage is not covered by warranty.
Similar Messages
-
I have an iphone 5, iOS 7.0.2. Going through photos on facebook app., above on the screen, came up "saving screenshot"....but there was nothing in camera roll. What does it mean this, what's are this screenshots?
I agree- I apologize if I sounded skeptical and attacking. In no way did I mean it to sound that way.
I completely agree on the software-hardware combo issue- this is why apple killed off 1G and 2G devices- because newer software revisions would never ever run well if at all on such ancient devices. can you imagine running iOS 6 on an iPhone/iPod touch 1G? That would be terrible. Let alone iOS 3 runs terrible on them and now are generally rendered useless due to newer App Store requirements (most require 4.3+ now to allow apple to kill off the older devices). forcing newer software on older hardware (apple, dell, HP,... Anything electronic this definitely applies to) will almost always yield less-than-par results. The other part is apple forcing you to upgrade by means of intentially making things obsolete. all companies do that.
All of this factual info aside, the issue at hand with the 5 is not a software-hardware combo problem- those are most widely seen with the major revisions. then again, this isn't the first time apple has gotten caught up in battery drain snafus (even iOS 5 was plagued with this as well- and now there are some people desperate to roll back but can't). it basically waters it down to the point where keeping the stock software will always yield the best results even though newer versions provide better features- it all depends on whether or not the person deems the added features are worth a performance hit.
PS. I'm still at 100%- and I've been using it periodically throughout the day. your combo worked for you, but didn't for me. And may or may not work for others- As the tech world would say, mileage may vary.
PSS. What model/carrier do you have? Just wondering. -
My iphone 4S wont allow me to restore a bckup of icloud it has just rebooted the os and for over 24 hours i have been trying to fix it i use this phone for my job so i need help. when i try to restore it says "Your iphone could not be activated becuase the activation server is unavailable, If the problom presests goto apple.com/support" It has done this for 27 hours now PLEASE HELP!!!!!!!!!
- Connect the iPod to the computer and see if iTunes sees it. If it sees it try to get the photos off the iPod.
- Next let the battery fully drain. It will likely take days. After charging for at least an hour try again
- Last, make an appointment at the Genius Bar of an Apple store. -
I have an iphone 4.
I disconnected it from my iTunes account but I am still using the iphone and the Apple ID.
If I make a purchase will it work?
Also, how can I reconnect my iphone to my Apple ID?Do you mean that you removed the phone from the 'manage devices' section of your iTunes account ? If you do then that won't stop you being able to purchase items on your phone - you only need to be logged into an account to be able to purchase with it.
If you do mean the 'manage devices' section then you can associate, or re-associate, a device (or computer) by using iTunes Match, or automatic downloads, or redownloading past purchases on it : http://support.apple.com/kb/HT4627 -
is it okay if we never shut down and just make the computer to sleep or we just put the flap(screen) to save the energy?
I recommend users to put their computers into sleep mode to save energy, and also, they won't waste time turning on their computers. You should only turn off your computer if you aren't going to use it for a very long time, but sleep mode is perfect. If you just turn off the display, your computer will still be working, so you mustn't do this unless you are going to use your computer in a short time
-
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
my iphone calendar wont sync with my outlook calendar. My inbox seems to be syncing just fine, its just that my iphone calendar is not showing the same events i have in outlook.
Hi
I have the a similar problem - only I can't actually get the calendar to show up. I've added the account and it's showing Mail and Notes but not Calendar. But I'd like it to show the outlook calendar.
I'm going to
Go to settings > mail contacts calendar
select your account that's affected
But under that account there isn't a calendar showing and I can't see any options to add it? -
Hi, i have an iphone 4s w/c is under contract w/ verizon. I will be traveling to the Phils. so i called and asked verizon to unlock it for me which they did. What sim card do i use in the Phils. that support 4s? Also how can i make sure that i wont be charged for roaming when i am out of the country?? Thanks!
Thanks for the info. I do not want to pay a lot of money for roaming services that's why i had it unlocked. Just wondering how the micro-sim works. I guess i have to research for a specific micro sim in the phils that supports the 4s here in US. Appreciate your time answering my question.
-
ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes
Hello,
This will fix your problem!
To put the device in DFU mode,
1. Connect the device to iTunes
2. Hold both the power button and the home button down simultaneously
3. After 10 seconds, release the power button but leave the home button pressed
4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
That should get you back on your way.
~Lt. Leviathan -
i bought this i phone from my cousin and it was with telus. they unlocked it. i came home and did a restore on the phone. i put a virgin mobile sim card in it and now can only recieve phone calls and call out. no messaging or data or anything else. I have done two restores since and removed my sim card. reset network settings and am running out of patience. the phone worked absolutly fine before upgarding to the new 6ios. please help me.
To be honest not being able to send or recieve messages and data is a carrier issue, not a phone issue since u said that your calls are working, if i were you my first course of action would be to get a new sim card from virgin mobile, or to restore the device as new one more time, if you restore the device as new AND get a new sim card from your carrier and those features still dont work, i would take the device to an apple store
-
Its just on the screen that shows the connect to itunes thing, someone pleaseee help ?
Okay my ipod needs to be restored, but I have a passcode on it, and it wont let me do anything because i have a passcode.its just on the screen that shows the connect to itunes thing, someone please help? i would greatly appreciate it (:
Connect in recovery mode and restore.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document
iPhone and iPod touch: Wrong passcode results in red disabled screen -
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
My iPhone 4 with cash card is slowly emptying the balance of the card. Only Wi-Fi is normally ON, most other things OFF. Are the Apps responsible for this, or is something wrong with the phone itself? How can I stop the "thief"?
I have this exact same problem. One solution is having your friends change their fake aliases on Facebook to their real bloody names, but I realise this is no easy fix.
-
Hi have a iphone 4 gsm model. Can not activate because I do not know carrier. The phone is in setup so I can not get serial numbers or imei number. Sim carrier is blank. Can anyone assist
You need a Sim inside the iPhone to activate it. If the iPhone is locked to a carrier, you need a Sim from that carrier. The person who sold you the iPhone should be able to give you that information, but if it is not available, you need to get it from Apple Care. Call them.
-
Greetings, I'm having trouble with my iMouse continually disconnecting from my MacBook Pro in Mavericks. The batteries are solid. I just eliminated the bluetooth for my headphone. I have used the mac to cast on my TV. I use bluetooth. ANy ideas?
Hi clemenbw,
Welcome to the Apple Support Communities!
In your situation, I would recommend reading over the attached article to help you troubleshoot your Magic Mouse Bluetooth connectivity issues.
Troubleshooting wireless mouse and keyboard issues
Have a great day,
Joe
Maybe you are looking for
-
This is my first in depth attempt to understand the code for enabling arrays. I THINK I have a fairly simple problem, but the code won't compile and NetBeans is telling me I'm missing a symbol &/or class, which I just don't get. Here is the code for
-
Vendor Posting from Treasury Module
Hi, Can some one please help me with posting directly to vendor / customer account instead of normal bank account from treasury module. Thanks, Devshree
-
Updating firmware when I can't get an internet connection through the router
I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet. I cannot get an internet connection through the router. Can I upgrade firmware without bei
-
Hi, Regarding workflow, is the standard workflow in SAP activated when you installed SAP? eg price error or updating error will generate a message to User's inbox? or do we need to activate anything in SAP in order for the workflow to work? Pls advic
-
HarnessPortletProvider: Errors generated by provider instance
Hi there, I have created a Portal Application for portlet development in Sun ONE Studio 5. I am working for Sun Portal Server 6.0. The problem starts when I access my portal application in browser. It throws me following errors. =====================