I have an iPhone 4, and when I plug any headphones in, including the new apple ones, they just sound like the speakers are blown, but when I pull the jack out a little bit they sound fine?
I don't know what to do, considering I just bought these headphones and it's the phone which will not let them play. Any help?
Could be a contact problem. There are certain places inside the headset port where proper contact is needed for the various functions the Apple headset has, for example the Remote/microphone unit that cheaper headphones don't have.
You should have your phone checked by an Authorized Apple Service provider or by visiting an Apple Store next to your place.
iPhone - Contact Support - Apple Support
Apple - Support - Service Answer Center
Similar Messages
-
I have an iPhone 5 and when i lightly tap on the back top part of my phone it sounds like something is rattling inside. Only on the top part of the phone, not on the bottom. I am wondering if anyone knows what this may be and should i have it looked at?
Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.
-
Hi! I have an iPhone 4s and when I FaceTime the sound is really low. It´s really annoying. When I do phone calls it works, and on my MacBook Pro it works much better on FaceTime than on my phone. Can someone pls help to so solute this? Really need help! Thanks
This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call. -
I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?
Hi Yendy14,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
- Judy -
I have an iphone 4 ande when the batery is 30% the cel turn off subtaly. I whant to know what happen and what I do. Anyone can help?
Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen -
I have an iPhone 4S and when I sync it, the "purchased" and "recently added" playlists do not show up on my phone. For some reason I can't get all the playlists I have set up in iTunes to show up on my phone.
Hi HipstaTrinty,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers,
- Judy -
I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?
Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/ -
I have an iPhone 4S and when I try to add an iCloud account is gives me an error "Cannot Sign In, The maximum number of free accounts have been activated on this iPhone." Is there any way to deactivate an account? I have one for myself, one for my family and one for my work. I had all three on my iphone and then I deleted my work. I wanted to get my own person @me.com account. It wouldn't let me create it from my iphone, so I created it from my Macbook Pro. I am trying to add it to my iphone, but it keeps giving me that error. If there is a way I can deactivate my work one so I can use my @me.com personal account?
Welcome to the Apple Community.
Unfortunately once all the 3 iCloud accounts have been created on your mobile device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer.
You should however be able to add existing accounts to your device, are you sure you aren't trying to create on rather than simply use an existing one. -
I have an iphone 4s and when I try to connect to my shared library I see an icon of a circle that only becomes half full. It does not connect. I also have an ipad, which connects without incident. My itunes library is larger than the capacity of both devices, so that cannot be the issue. How can I get the phone to connect with my shared library?
My husband and I are using the same iTunes account on all mac & pc computers, but the libraries are different on each machine. We always manually manage our music (no auto sync). iTunes is up to date on the PCs. My husband uses our joint iTunes account on his pc, but once again, has a different collection in his library from those on the other machines. He can't load any music from his PC to his iphone 4. I can load music from my mac library to my iphone 4s, but cannot load from my pc library to my iphone 4s. How can I switch my main library that it syncs with from the mac to the pc?
Thanks -
Help! I have an iPhone 4 and when I tap the "messages" thumbnail I'm not able to see a list of my text message threads.
I contacted Verizon (my phone's carrier) and they told me to simultaneously press the on/off button and the menu button. That rebooting fixed the problem, but will I have to do this all the time? Wonderinf if I should take the phone back to the Apple store and get a new one. I've had the phone about two weeks.
-
Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.
Hello Amarchand Sharma,
Are you working with a Windows computer? If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
http://support.apple.com/en-us/TS3221
Regards,
Judy -
i have a iphone 4 and when i call people about 70 percent of the time then cant hear me and the mute is not on , need some help
Please see the More Like This section on the right.
-
I have an iPhone 5 and when I go to raise or lower my volume it says my headphones are connected and they are not how do I fix this?
more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
and here
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=UTF-8&oe=UTF-8 -
i have an iPhone 4 and when i connect it to my mac i cannot back up device and the bar is for the phone is only showing "Other" as the memory , Help ?
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Maybe you are looking for
-
I need to get the tagName of a node of the first child of the Root
Hi All, I need to get the TagName of the Node immediete after the Root. I won't know what is the TagName, and based on the Tagname only I can process the records. For example I might receive a SALES object or a MARKETING object wrapped under the root
-
Control a LabVIEW GUI exe from LabVIEW
I have a vendor supplied LabVIEW.exe application, it's used to control a device that's part of an automated manufacturing process. At present we need to manually run the exe from the control PC , read data, make a decision, then input a few values,
-
Error installing 10.6.4 update
I download and install the update, but when the Mac is shutting down and installing the software I get "error installing selected update" or something similiar, then the machine reboots. M.
-
Discoverer Web Viewer and Charts
I did a search in the forum and saw no previous discussions on this subject. So, here's the question. I've developed a worksheet with a graph in Discoverer Plus 4.1. Now the question is how does one display this graph on the Discoverer 4i viewer (Web
-
Can one post movies via iWeb which cannot be saved by the viewer?
Does anyone know of a way to make movies on iWeb "view only" and not savable by the viewer of the website? This would enable me to post movies which I want to show but don't want them to have to have access to the file to use as they please.