I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help

I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help!!

micron12
Hi I had a simular problem with my iPhone 4 and iPad 3 and found that the USB connection on the computer was at fault so I moved the connection to a USB port on the Mother board.This curred my problem,see if ti works for you.
Windows 7 and windows XP

Similar Messages

When I tried to update Itunes I got an error message telling me to reinstall. When I try to reinstall I get a message "Apple Mobile Devide failed to start. Verify you have sufficient privliges to start syem services" Can anyone help here?

When I tried to update Itunes I got an error message telling me to reinstall. When I try to reinstall I get a message "Apple Mobile Devide failed to start. Verify you have sufficient privliges to start syem services" I'm not sure what this means, can anyone help here? Thanks,

I tried the temp fix you mentioned, it didn't work. I could not delete all of the old itunes files, the uninstallers would crash half way through and if I tried to manually delete anything it also gave me an error, so reinstalling the older version would not work.
Frankly, this whole thing has got me ****** off. judging by the amount of complaints here, there must be a lot of people having this problem, yet Apple has let it go on for almost 2 weeks. What kind of inept coders are they employing if they can let an update that completely frags their software get through QA.
Does anyone know of any programs that will play itunes music files? I am just about done dealing with iTunes, but I've got a ton of music that I don't want to have to purchase all over again.

HT201328 after clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?

After clicking on ''reset all'' on my iphone4,it has refused to come on. All i see is a prompt on the screen asking me to connect to iTunes. I cant make any calls or do an6ything with the phone. Anone with any advice?

Hi Tonma,
Sounds like your device is in recovery mode. Follow the instructions in this article:
http://support.apple.com/kb/ht1808
Cheers,
GB

HT4009 Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HT1386 I've updated my 2007 MacBook to 10.6.8, and now my iPhone 3 (used as iPod) and iPhone 4 aren't recognized to be synced anymore or I get an error message telling me to update my phone to 11.1 or something. When I do that is appears to update and whe

I've updated my 2007 MacBook to 10.6.8, and now my iPhone 3 (used as iPod) and iPhone 4 aren't recognized to be synced anymore or I get an error message telling me to update my phone to 11.1 or something. When I do that is appears to update and when finished nothing appears to have updated.

It is possible one of the 10.6.8 updates may help:
Combo v1.1 (7/25/2011), 10.6.8 2013 Security Update 004, 2013-005 Java update.
Note, your machine is too old to use the latest Java from http://www.java.com/

HT203175 When I install itunes I received an error message like this:The exception unknown software exception (0Xc06007e) ocurred in the application at location 0x7c812afb

When I install itunes I received an error message like this:The exception unknown software exception (0Xc06007e) ocurred in the application at location 0x7c812afb. After the installation the computer is showing the message every time.

If you update your QuickTime Player, does that clear up the iTunes message?

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

I tried downloading the new update for itunes I get these error messages: Visual C runtime library R6034 an application has made an attempt to load the C runtime library incorrectly Error 7 windows error 1114. What should I do to correct this?

I tried downloading the new update for my desktop PC I get the following error messages:
Visual C++ Runtime library
R6034
an application has made an attempt to load the C runtime library incorrectly Error 7 Windows Error 1114

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99907)

Suddenly i am unable to import RAW to Lr4.4. I was able to import just prior to leaving US, but now i receive an error message (if i could update the screenshot, i would)

i have been using Lr for years. No recent changes to my preferences on Lr4.4 or my MacBookPro. When i tried to import RAW while traveling in Vietnam, i receive this error message
"some import operations were not performed"
then there is a list of my import files with the comment "the following files were not imported because they could not be read"
yet i have been importing RAW files from this camera (Canon D5II) for several years.
Thanks in advance for your help

"Could not be read" means that the destination directory, where the photos are supposed to be copied into, does not have WRITE permission.
Change your permissions on that folder.

TS3694 I tried to perform an update on my iphone4s, it said it completed. It then went to the screen that shows the itunes logo with the usb cable pointing to it. I have tried every step the internet said to take in an attempt to get my iphone4s out of re

I can't get my iphone 4s out of recovery mode. I have tried many things including: connecting it to iTunes and going through the recovery steps, holding down the home button and the lock button until the apple icon appears. Neither of these has worked.

Place the device in DFU mode (google it) and restore.

While running an update in Itunes i received an error message - Unable to locate component because AVFoundationCF.dll was not found. Then Itunes was not installed correctly. Error 7 (windows error 126) Do I have to reinstall and will I loose all my music?

While running an update in itunes (not installing), it stopped in the middle of the update and i receceived the following messages:
Application failed to start because AVFoundationCF.dll was not found. Reinstalling itunes may fix the problem. Then "itunes was installed incorrectly. Please reinstall itunes Error 7 (Windows error 126)". If i uninstall and reinstall itunes will I lose all of my music, etc.?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

TS1424 Every time i want to sign in to my account i receive the error message that my apple id has not been used yet and then i get the message to contact the itune support

Every time i want to sign in to my account i receive the error message that i need to contact itune support

Welcome to the Apple Community.
Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

HT3728 Firmware Update 7.6.4 Error: I uploaded the 7.6.4 firmware update today, and received an error message as it was finalising. As I am using my Time Capsule as the Airport router, I am now no longer able to access it to try to resolve the problem. He

Dear Support Team,
I agreed to the Time Capsule 7.6.4 update today, but as it was completing, I received an error. It said to close the page and try again.
I use my Time Capsule as my Airport wireless router and now can't access the Time Capsule to re-upload the Firmware update.
Has anyone else had this happen?
Is there a way to resolve the problem?
Do I need to hardwire the Time Capsule? Then what?
Would really appreciate some help!!
Thanks everyone.

Factory reset the TC and it should come back to life.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
As a rule .. wireless is not reliable enough for mission critical work like firmware upgrades.. (Heck I don't think it is reliable enough for backups).
Apple doesn't insist on wired connections.. some other manufacturers do.. and post warnings not to attempt it over wireless. Warnings inevitably read after the failed firmware update btw.. so perhaps Apple have decided to just save themselves the hassle.
I believe it is just good practice to use ethernet for any time that sitting on a branch.. whilst sawing it off (ie failure will kill any future access).. means you always use ethernet for any setting up of a wireless router.. but you see I am old.. with grey/white hair.. and too many dead modems and routers around me.

HT1338 When updating Iphoto to 9.4.1 from 9.2.3, I receive an error message stating: An error occurred while installing the updates (103).

I have recently update to Mountain Lion and am receiving a message to update iphoto. When I try to update, I receive the message that"an error occurred while installing the updates (103)." I am upgrading from 9.2.3 to 9.4.1.

Test after each of the following steps until the problem is resolved.
Step 1
If you're trying to install more than one update at the same time, do the installations one at a time.
Step 2
Triple-click the line below to select it:
/Library/Updates
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu. A folder should open. Move the contents to the Trash. You may be prompted for your administrator password.

I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help

Similar Messages

Maybe you are looking for