I Have An iPhone 4. That Was Working Perfectly But The Battery

i replaced my screen and battery on iphone but it was working prefectly then i tried to restore from backup but that wasnt successful so i decided to restore it all but it gets a -1 error everytime. it loads almost at the end then it turns white and cuts off. is it the battery or what? need help. im out of warranty and the screen and backs are different colors.

Error -1 indicates a hardware issue. This is why it is a good idea not to tamper with it.

Similar Messages

  • My 16b 3gs was working perfectly.  The battery died and I plugged it in correctly to charge and it also neohook up to itunes for restore.  It also had a little exclamation button that reads: IMEI:unknown and just below it read ICCID: Unknown. Nothing else

    My 16gig ipone 3gs was working perfectly since it was replaced only a month or to prior.  I was visiting with some friends around the ole pipe and low and behold the phone was completly dried of it's go juice.  One we noticed I reached into the kitchen and plugged it in to the outlet.,,,  The battery died and I plugged it in correctly to charge and it also said Emergency calls only in various foriegn languages. It also said to plug it into your itunes. All the while haviing no calling options to say the least.  I followed the apple instructions perfectly when it said that there was a new version of itunes I should download first, prior to refreshing it.  It went through all of the installing and so on then at the end you still get a useless phone that doesnt work.  IMEI: unknown and ICCIC; unknown (both of which can be found by you on the box or on the sim card case.  I  completley removed the sim card and it worked in my hubbies 3g.   I tried several times and also AT&t had made sure the imei and iccic where correct.  So I spent hours getting nowhere with this.  Its new and nice and broken.. Im going to leave that Apple store with a brand new iphone 4 tomorrow.  Simply b/c it is for my pain and suffering and for giving me a crappy refurbished phone.  Fair is fair.  So if you've found a way to fix great, but Im going to get that free iphone 4  xoxo  toodllloooo

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have an iphone 5 that was originally with verizon but has been unlocked now by them and the phone is still under the apple warranty, if I go to replace for power button malfunctioning, will they give replace it with an unlocked phone as well?

    I currently have an iphone 5 that was verizon locked but has been unlocked by them because of my contract, the phone is still under the apple warranty but the power button is not working, if it was the case that apple has to replace it with another phone, will they replace with an unlocked phone now?
    thanks

    The SIM Lock is stored on the Apple Activation Server - if it has been correctly unlocked by a network then this would have been done on the Activation Server.
    When you get your replacement handset through Apple they mirror the activation server details of your existing handset and the current SIM LOCK status is mirror'd onto the new device.
    (100% Accurate - done mine 2 weeks before christmas due to original 5 sleep button stopped working)

  • I have an iphone 4s unlocked with att prepaid plan (non-contract), everything was working perfect BUT since i update to IOS6 i can not send MMS to anybody has Android, i went to att technical center they said only apple store can fix the problem, i went..

    I have an iphone 4s unlocked with att prepaid plan (non-contract), everything was working perfect BUT since i update to IOS6 i can not send MMS to anybody has Android, i went to att technical center they said only apple store can fix the problem, i went to Apple store MANY times they could not fix it, so they gave me a new iphone 4s and they said they fixed it but they did not,iam so mad that's not fair, can somebody help me please.

    The nice thing about owning this overpriced POS is that Apple not only doesn't support it, but also doesn't want to hear about anything negative regarding it.  So I spoke to the so-called "support" people at Apple who successfully screwed up my contacts beyond repair.  I got a nice email from Apple asking me to rate the support I got.  I was actually civil and described the issue tactfully.  What do I get in return?  Nothing.  Not a damned thing!!  You're luck you've got me by the short hairs on a 2 year contract but I'm still tempted to throw this POS through the front window of the nearest Apple store!!  Not only will I be replacing this phone with a competitive product but I won't be buying anymore Apple crap.  I guess when you con 27 million people into believing your rhetoric and sales lies, you don't have to care whether some customers get screwed or not.  I'll be going back to Verizon and threatening legal action if they don't take this electronic dung heap back but I'm sure the teams of lawyers Apple and Verizon have on staff have insured that I have no rights in this matter and you're free to screw me anytime you please.  Sad. I used to love Apple as a company and your products.  Now you're just another Microsoft with more trendy looking junk.  I've had it with you.  If any of your executives are brave enough to talk to me, please contact me at your convenience.

  • Hey there, I have an iPhone 3g that was synced to my computer. My computer got stolen with all my music on it. I have a new computer but I can't sync my computer to my iPhone. How can I recover everything that's on my iPhone 3g to my computer?

    Hey there, I have an iPhone 3g that was synced to my computer. My computer got stolen with all my music on it. I have a new computer but I can't sync my computer to my iPhone. How can I recover everything that's on my iPhone 3g to my computer?

    If your backup copy of your computer was not stolen, then use it to put everything back.
    Otherwise, authorize your computer for your itunes account, connect iphone, do not sync, Click:  File>Transfer Purchases
    This will transfer itunes purchases from the iphone to the computer.
    Enter at least one unique contact and calendar entry on the new computer.  When you first sync, then you should get the option to merge the data.

  • I have a Macbook Pro that was slowing down. The HD was nearly full as I do a video work. I removed over 400gb of photos and video and it made no difference. I ran disk inventory x and that says that there is only 60gb on the hard drive but disk utility sa

    I have a Macbook Pro that was slowing down. The HD was nearly full as I do a video work. I removed over 400gb of photos and video and it made no difference. I ran disk inventory x and that says that there is only 60gb on the hard drive but disk utility says there is still 430gb on the HD. How do I remove what DU says is still there.
    Thanks

    You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed.
    About Time Machine's "local snapshots" on portable Macs

  • HT1212 i have an iphone 3s that was never connected to itunes but an icloud account was created and it is passcode disabled and i have tried the If you have never synced your device with iTunes recovery mode but it is still disabled

    i have an iphone 3s that was never connected to itunes but an icloud account was created and it is passcode disabled and i have tried the If you have never synced your device with iTunes recovery mode but it is still disabled it connected to itunes for a minute and then back to disabled

    Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
    Where did you get the iPhone?

  • TS3899 I can't access my yahoo emails in the email in the iPhone 5c it was working perfectly fine earlier an now it quit

    I can't access my yahoo emails in the email in the iPhone 5c it was working perfectly fine earlier an now it quit

    I have a similar problem. I was receiving email on my iPhone for months, and then it quit working. When it quit working, I continued to receive emails on my iPad even though the server and port settings were exactly the same between the two devices. I tried deleting and re-adding my email account on the iPhone and restarting my iPhone, but I still couldn't receive email on the device. The only way I could get email to work on my iPhone was to switch to using a POP3 email server (this is the server that my phone auto detected when I re-added my email account) -- the server that was working previously and that is still working on my iPad is an IMAP email server. Since the IMAP server settings continue to work on my iPad, it seems that the problem is with my iPhone and not my email server.
    iPhone 5s Version 8.1.3 (12B466)
    iPad 2 Version 8.1.3 (12B466)

  • I have a IPhone 5 thats having screen separation and my battery drains very fast

    I have a Iphone 5 that was kept in a otter box when I noticed my phone wasnt holding charge as long. I removed the case to see that the screen was separating from the body and as of now the phone wont turn on at all.

    Take the device to Apple for evaluation.    

  • I have an iPhone 4s that is still covered under the AppleCare Protection Plan. I have a pretty significant crack across the screen and wanted to know if I have to pay any additional fees to replace the screen or replace the entire phone.

    I have an iPhone 4s that is still covered under the AppleCare Protection Plan. I have a pretty significant crack across the screen and wanted to know if I have to pay any additional fees to replace the screen or replace the entire phone.
    I was hesitant to purchase this protection plan at first about $70, but the customer service agent reassured me that there were no deductables and thats why I bought into it. But now that I look around on the support site, I see that it says that there are up to two incidents covered for a service fee of $49. Did I really get duped?

    If the issue is a manufacturing defect, there is no cost to have the device replaced.
    If the issue is a result of user damage (like a cracked screen) and you have AppleCare+ Apple will replace the device for the minimal fee of $49.  They will do this up to two times during the timeframe of the protection plan.
    If the issue is the result of user damage and you do not have AppleCare+ then the Out of Warranty replacement cost is $199 for the 4S.
    No, you were not duped, you were simply not completely informed.  Whether that was a result of them not sharing all the information or you only hearing what you wanted, no one here knows.

  • I bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message. so when i tried to restore the iphone setting it is giving me now "ICCID: unknown" message please help. any ideas?

    i bought a factory unlocked iphone 4s. it was working fine but when i upgraded it to iOS 5.1 it gave me "no sim" message.
    so i tried then to restore the iphone using itunes but it got worse it is giving me now "ICCID: unknown" message please help. any ideas?

    Please define "factory unlocked". The term is basically meaningless. iPhones are sold either carrier locked or unlocked. Some carriers will unlock them after a period of time upon meeting certain requirements and paying a fee.
    There are lots of places that will "factory unlock" an iPhone. This basically translates to "hack". This can cause permanent damage to the phone. Best case scenario is these phones will re-lock to the original carrier on an update or restore. Worst case it they become expensive bricks.
    ICCID unknown indicates a critical failure. There is no way to resolve this other than taking it in to Apple and getting the phone replaced. It's very possible that the phone was hacked and attempting to update has now killed it.
    Where, EXACTLY, did you get this phone?

  • I just downloaded iTunes on my new PC and all the music that I have purchased through ITunes that was backed up on the cloud won't play. It is telling I must authorize this computer before it play pre purchased music. how do I authorize my computer.

    I just downloaded iTunes on my new PC and all the music that I have purchased through ITunes that was backed up on the cloud won't play. It is telling me I must authorize this computer before it can play pre purchased music. how do I authorize my computer to play this music?
    Thank you for any assistance.

    Tigon's already got you covered here. But I'll chime in with some English localisation advice.
    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • I have an iphone 5 on contract with 3 but the speaker isn't working , I've spoken with my provider and they said I need to take it back to an apple store .is this correct ? Many thanks

    I have an iphone 5 on contract with 3 but the speaker isn't working , I've spoken with my provider and they said I need to take it back to an apple store .is this correct ? Many thanks

    If you received you phone as part of the contract then surely from a legal pov your contract is with 3 not Apple unless you bought Applecare, if you bought your phone outright then put your 3 SIM into it then yes you'd have to visit an Apple store with your phone's purchase receipt.

  • I dropped my phone into the bath last night and it was working perfectly fine the hole day, I went to put it on charge and now it won't charge or even turn on what do I do

    I dropped my phone into the bath last night and it was working perfectly fine the hole day, I went to put it on charge and now it won't charge or even turn on what do I do

    You can try drying it out internally by wrapping the unit in a paper towel and putting it in a bag with a dessicant safe for electronics such as silica gel pellets, or failing that in a bag of dry, uncooked rice, for a few days. It's very probable that it's been permanently damaged, but it's possible that if you dry it out, it may then work. If after a few days in the bag it still has problems, then you'll need to pay to get it exchanged (by Apple) or repaired (by a third-party repair service) or buy a new iPhone.
    Good luck.

  • So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't

    So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't work. I don't know what to do!!

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

Maybe you are looking for

  • IC Web Client: Requirement: After click on button END back to CALL LIST

    Hello Experts, we are using CRM 2007 (6.0). I have to implement the following requirement: When the user clicks on the button END in Interaction Center the user should come back to the CALL LIST. Right now the the system always is getting back to IDE

  • Set ajax value to the textbox[in modal box jquery]

    Hi, In my page i have one interactive report with 2 button add and edit, i have used modal box j-query for the button add and edit. Adding the data through modal box working fine. when tried to edit the existing data i am not able set the data to the

  • AFP Connections More Than Number of Users - Why?

    In Server Admin > AFP, why are there more connections listed here than the number of users? For example, I have two users with accounts and both logged in currently. Server Admin > AFP shows four connections, one for the first user (with two differen

  • 11g installation warning - how to remove OH from PATH

    Hi all, I am getting the following warning when installing 11g on linux 4.0. I am using the same Oralce Base where 10g is installed. Please let me know how I can remove Oralce_home from PATH variable.. Checking PATH environment variable... Check comp

  • Create document set using ECMA Script

    Hi, I want to create a document set in SharePoint 2010 document library where i have already included document set content type. Is there any way to create a document set using ECMA Script?? If yes, then please provide the sample code for this... Tha