I have an iPhone 5 16gb white color and i did not get any of the services from apple pls help[ me out
I have one iphone 5 16 gb white colour with me and its in still under warranty and my phone was fallen down by chance and it got turned off totally and not even switched on also then i went to apple authorised service center for regarding the same . then service center people said that sir you need to submit your phone , after that i left my phone to service center and after two days i have got one call from service center that sir your phone is under phisical damaged condition so u will not be abel to get warranty from apple this will cover under paid replacement and you need to talk to apple customer care also regarding this .same .
Then i called up to apple customer care and they said sir we have got some images from the service center regarding your phone and we found that your logic board is damaged from inside and you would not be abel to get the paid replacement also you need to buy a new phone on stock price i was shocked on that time why would i pay 40 to 50 thouasnd again on iphone if its not that much stronger to take bit of imapcts like this
I had talked numbers of time to service center also but they all are denied against the complainst
if any body is there how can help me out regarding this so pls register my complaint and help me out from this highly dissatisfied service from apple .
Thnaks
karan
Warranties do not cover damage
Similar Messages
-
I have a problem related purchase
You will need to contact the store via phone or support; we are just other users here and cannot help with purchase problems.
-
I just tranfer all my photo from my Mac from itune to my Iphone so I can setup Mac back to factory setting after I don't with that, I try to put my photo back to my Mac and Iphoto did not detect any of the photo that I had tranfer from itune it only detect the one rhat i took with the Iphone PLAESE HELP!!!!!!
Hello Partii,
It sounds like you may use a POP account for your email. With a POP account, email applications like Mail and Outlook can remove emails from the server, so when another device tries to check the server for new emails, it doesn't see any.
You may need to adjust settings in Outlook so that the emails are not removed from the server when downloaded. I found an article with more information:
When using a POP email account with multiple devices, email messages may only appear on the first device that receives them. This occurs when an email client is configured to automatically remove email from the server once an email client has received it. You can configure your email client (or clients) either to keep a copy of the email on the server, remove it after a certain number of days have passed, or keep it until you move it from your Inbox.
I recommend reviewing the full article for steps on adjusting these settings; you can find the full article here:
Using a POP account with multiple devices
http://support.apple.com/kb/HT3228
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hello Apple ! I have in Iphone 5 16GB WHITE and it have a problem so I send my iphone to a service from my country and they sad that I made a unauthorized intervention and it is not true, this phone was nerver open , the seals was open by the service .I think they try to cheating me because when I spoke with them , they answer me very ugly and unpolite and they sad me that they made what they want. So can I sand my iphone to a service from another country because I want to know that they will say the same thing ?I have international guarantee. Answer me soon and thank you for help!
If you can find out what country your iPhone was officially sold in, you could take it there (or if originally sold in the EU, take it to any EU country where Apple officially sells the iPhone) or you could send the iPhone to someone you know in that country who could get it serviced and then ship it back to you. Apple Support does not accept shipments from other countries, and will not ship a serviced iPhone to another country.
This, though, presumes that the iPhone has not been modified as your service provider claimed. If it has, Apple will not provide service for it in any country.
You may be able to find out what country your iPhone was officially sold in by calling Apple Support:
http://support.apple.com/kb/HE57
and giving them the serial number.
Regards. -
Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.
Hello Ritugor,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi I have iphone 4s and my Bluetooth and wifi do not work. it was working before and I did not do any update for IOS or anything but it just happened. what I should I do to resolve this?
Hae you tried to do a hard reset of your phone? This will not lose any data. Hold the sleep/wake button and the home button until the phone turns off ignoring any slide to power off messages. Then power the phone back on.
-
I have a iPhone 4 in recovery mode and it will not restore to factory settings.
I have a iphone 4 in recovery mode and it will not restore to factory settings. I get the error message error 21 and 2001. What can I do? I have tried all the steps.
Alextails998 wrote:
I have tried all the steps.
All what steps?
Did you go through the troubleshooting information here: http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
and
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
If so, then it's a hardware problem. Make an appointment at the genius bar and get it replaced. Based on the "it was water damaged", I think it's a safe bet that it's toast. -
I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8
1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2 -
My Ipod Touch doesn't have an App Store button on it and I can't get any apps on it. Please help me!
My Ipod Touch doesn't have a App Store button on it and I can't get any apps on it. I use to have one so I know how to work it but I never had this problem. My Ipod Touch is a 16 gig 1st generation. Please help me!
Sybar13 wrote:
My Ipod Touch doesn't have a App Store button on it and I can't get any apps on it. I use to have one so I know how to work it but I never had this problem. My Ipod Touch is a 16 gig 1st generation. Please help me!
What software version do you have on the ipod?
Apps requires at least 2.0 -
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?
Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-) -
We have Noticed after our R12.1.1 and upgrade to 12.1.3 Federal is showing up and we did not select it on the installation choices any ideas?
We have a GOLD instance with patches and no data. Can We safely ignore the FV module?
You can but you will need to consider additional steps for this module -- Please see "Even if the customer has no longer purchased a license to use the product .." line in the doc referenced in my previous reply.
How would or Why would it be showing up as installed?
It must have been selected when the installation was done.
Thanks,
Hussein -
I have set up 3 mails in my outlook macbook pro, i am getting old mails for my company account mail, and i am not getting any mail to my hotmail, please help
daily i receive 100 old mails, which are already read
-
Unable to update ios6 software. It says Ido not have enough gb, but I bought more and it did not help..
How do you buy more GB?
Are you updating via connecting your iPad to iTunes? -
I am signed into my iTunes account. However, Im asked for answers to security questions I can't remember. I have clicked to reset through e-mail, yet I am not getting any email from iTunes. Any advice on fixing this?
If you are not getting the email, you can contact Apple Support to have your Security Questions reset:
ACCOUNT SECURITY CONTACT NUMBERS
Once you get them reset, check your Rescue Email address on Manage Your Apple ID to make sure it is still a functional address. It is not the same as your primary or alternate address.
Cheers,
GB -
I have a old firefox account and I cannot sign on too. I made new account just to ask a question. I tried to sign in with old emails, but did not get any reset information back. How can I recover old information?
Backing up and restoring your Profile should have included your bookmarks.
https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
That looks like a JSON bookmarks backup file, from 11-01-2012. Did you try '''restoring''' that file?
https://support.mozilla.org/en-US/kb/restore-bookmarks-from-backup-or-move-them#w_using-a-bookmark-backup-file
Never messed with JSON files other than viewing them on a few occasions out of curiosity. There are no line breaks which make them very difficult to read.
As far as working with that file in {like} NotePad goes:
A. use Find / Search for each indecent of a '''"uri"''' string, then "copy and paste" the uri into another text file, and then move on to the next "uri" string.
B. use a text program where a filter can be set for the "uri" field in the JSON file for a line break or to "scrape out" the "uri"s only for display or export to a list of uri's.
Or try using an online JSON editor like this, to try to display only the "uri" field.
https://www.jsoneditoronline.org/
Maybe you are looking for
-
Bootcache.playlist no such file or directory, slow booting 10.7.2
Hi guys, I have this problem after updating to Lion 10.7.2 : There are many threads addressing a similar problem, but all the fixes mentioned there did not work (deleting bootcache and checking access rights) and also my problem is different, because
-
How to remove SD card from CD slot
My nephew put SD card in CD slot how can I remove it ?
-
I am trying to create an image map for the map found on my homepage - http://www.smartcharteribiza.com/ I have followed a couple of tutorials and everything seems to be working in photoshop, but when I upload the image to wordpress, the map does not
-
I need help re Adobe Pro 9 and Adobe Xi Standard
I recently bought a Fujitsu Scan Snap for my home office. I installed the Scan snap with no issues. Unfortunately, there are no real instruction with regard to the software end of the installation process. The scanner came with additional software
-
Hi Experts, In Script form i have 4 columns like credit2008,debits2008, credit2009, debit2009 if no datas any one these column that column has '-' at the last place example credit2008 debits2008 credit2009 debit2009 20,0000.90