I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones
I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones
The problem occurred a few days after I had updated to iOS 7.02
Hey Tahls23!
I have an article that can help you troubleshoot that issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Take care, and thanks for visiting the Apple Support Communities.
-Braden
Similar Messages
-
My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. I tried restarting it a few times, nothing worked. I looked up many tutorials, and still nothing did the trick. Any tips?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
When I play a video on my Apple TV from my iPhone (airplay) is it possible to have the sound come out of my iPhone instead of my tv?
No
-
Sticky This : Surround Sound coming out of front speakers and Subwoofer not work
The problem with Creative forum moderators and the like is that they have used their products so often that they forget the basic really simplistic things and as a result have a lot of frustrated customers (As indicated by the number of?problem posts?when this really need not be the case)?After building myself a media center with Windows XP (Yes the best DVD backup software is made for XP) my?X-Fi card Surround, Centre and Front Speakers were all mapped together for sound. After searching through the forums at many unanswered posts with similar problems I eventually came across the answer a few months back after a few days of reading this forums posts. The problem arises because of the Windows default settings which need to be changed when insatalling the sound card. Which I believe a good driver should be doing anyway. This is the menu path:StartControl PanelSounds and Audio DevicesAudioAdvancedPerformanceHardware Acceleration slide indicator should be on Full, then Apply?At this stage I got all the Speakers to work independently except the Subwoofer?I am not one to sit and study a user manual comprehensi'vely before attempting installation. I normally look for any serious warnings or precautions adhere to them and then slap the thing in and usually everything just happens in the correct sequence or that is how it should be with a new piece of hardware anyway. I use the manual more for problem solving. Anyways my point is that I have not read the manual in depth yet but all must be aware that you need?4-part jacks to get the most out of your?X-Fi sound card. The extra?points are required?in the Center/Subwoofer and Rear Speaker jacks because the extra connections within these jacks are used for SPDIF out on the Center/Subwoofer Jack and Side speakers for your 7. system on the rear speaker jack. (I dunno why they don't just put in 2 extra jacks that are the normal 3-part jacks .....or perhaps it's a way to force you to buy creative speakers which come with very rare?4-part jacks)?The subwoofwer can only be made to work if you pull out the 3-part jack just enough to make the correct contact with the card that gives you subwoofer signal.
@tryignan ,
Hello and thank you for posting on the HP support forum. I have one question have you tried doing a system restore back to before this problem started. Something has updated or changed in the drivers or Operating system to cause this.
Have you removed both audio drivers and just ran with the AMD audio driver.
Now did you try this when you removed your drivers. Try booting into safemode and remove the two audio drivers.
Download your software and drivers for your system and save to dvd or usb memory stick.
Run the Recovery manager to restore software and drivers to factory spec.
Using Recovery Manager to Restore Software and Drivers (Windows 8)
Now if that fails try doing the full Windows 8 recovery.
Performing an HP system recovery (Windows 8)
Please post back and let me know if this was of any help.
Thank you again for posting and have a great day and a happy new year.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
When printing from the mozilla 4.01 browser the printer spits out blank pages. It seems like it happened after downloading and running mozilla 4.01 browser.
I have to copy the link to IE (boo!) to print the coupon or page on my printer.
Why?The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
*https://support.mozilla.org/kb/Private+Browsing -
Sound comes out of ear buds and ipod
hey ive had my 5th gen nano of about 10 mounths but its weird when i want to play a song it comes out of both the headphones and ipod. it just started today but i have no idea. so if anybody could help me that would be wounderful.
The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an apple store or call the Apple iPod tech support if still under warranty or you have Apple Care. -
Sound plays out of my speakers AND my earphones at the same time
I'm not sure how long this has been going on for but I just found out that when I plug my earphones in that the sound still plays out loud from my laptop (supposed to only come out of earphones).
How do I fix this?
This laptop is only months old and I can't seem to avoid running into problems with it's audio. Thanks a lot beatsaudio HP. I'm a student so it's very important when in a library that I'm not producing music or sound for everyone. Just for my ears only please.
JessHi @jlarbs
I understand that you are having a problem with sound playing through the speakers even when earphones are plugged in. I am happy to help.
A fix to try is, to go into the Control panel
then Hardware and Sound
then click on Sound and select the Recording tab
Select your microphone/headset as the default device, and press OK.
Also you can look at this page from answers.microsoft.com, as if offers a few more suggestions.
How prevent sound from playing through both headphones and speakers
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
I have an Apple16GB with BT Yahoo home page which had a box for mail and weather and further down I had my local weather, I have touched something and lost these boxes and my home page has changed and I would like to get it back as it was. I have to admit to being useless at computers although I love my I Pad.
Is this the website that you are looking for? According to the very little bit of research that I did on this before responding to you, there have been changes made to the website and to the way that works ...if I read everything correctly.
http://home.bt.com/
Did you have a shortcut to the website on your iPad home screen? If that is what you want to create again, navigate to that website in Safari and then tap the arrow icon next to the address/URL field at the top of the Safari toolbar. Form the window that will pop up, select - Add to Home Screen. That will put an icon on your home screen that will allow you to open directly to that page in Safari when you tap on it. -
the speaker of my macbook mutes all at a sudden for few seconds automatically and comes back even the speaker icon which is on top right side of the computer also shows mute at this point. and when the volume of the speaker is pressed at this moment it shows locked symbol of the speaker. Kindly help how to resolve this. I am not sure but recently I did install leopard to upgrade my computer does this effect the problem with my speaker.
This is all most unfortunate...from what I read in your post you have covered everything that can be done at your end....something is damaged on the Logic Board it sounds like...as to how much it would cost only the people that end repairing will know after it is diagnosed....take it in...tell them what you have found and tried so far...maybe that will help narrow down the problem...
Good Luck.... -
Maybe you can change the Market so that we can try it?
I'm not sure whether this would be considered "rooted" since it's not permanent, but I think it should. There are several of us at the N2A form who are interested.
Thanks.You can find a link to download Firefox for Android directly from our FTP server on this page: https://wiki.mozilla.org/Mobile/Platforms/Android
-
I don't know what happened to it. I just updated it and now, the sound comes out tinny and overdriven. My setting were just as before, but the sound has become very crappy.
Any solutions?You're pressed the volume switch top right side to go up ??
If that doesn't help ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then try sound. -
I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting to the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car. A friend of mine drives an Acura and said she is also having the same problem? I have to connect the phone every time I get in the car.
Turn Off BT on your Phone & ReBoot..
Delete the phone from the vehicles memory..
Restart the Vehicle & go thro' the Pair set up.......... -
Hi! I have an iPhone 4S with iOS 6.1.3 and I have iTunes 11.1.3.8. on my Windows 8. Now I can't sync my iPhone, because the device is not recognised by iTunes. Somebody have any idea why, or what can I do (except refresh the iPhone software) ?
Hi Drazse,
Thanks for visiting Apple Support Communities.
If your iPhone is not recognized by iTunes for Windows, the troubleshooting steps in this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
I have an Iphone 6 with 16gbs, so I'm running out of room. When I go to settings, general, then about, it says I have 97 photos and 23 videos, but I have nothing in my video app and in the photos app only has 12 pictures and 1 video. Any clue what would be causing this?
I have an Iphone 6 with 16gbs, so I'm running out of room. When I go to settings, general, then about, it says I have 97 photos and 23 videos, but I have nothing in my video app and in the photos app only has 12 pictures and 1 video. Any clue what would be causing this?
-
I have two iPhones synced with the same Apple ID and so the contacts are being shared in both of them. Is there any way to revert this?? The reason is that if I delete some contact from one device then it automatically erases from the second one as well
Yes, you stop using the same Apple ID under Settings > iCloud.
Maybe you are looking for
-
Need to place a variable value at the end of report heading in BI 7
Dear All, We have to place a variable value at the end of the report heading and the value should get refreshed whenever we change the variable by using "Change Variable Value". I have created a macro and the value will get triggered unless and until
-
Accessories/Cases for a Zen Tou
Does anyone have any good links to websites or stores selling attracti've and useful cases for the Zen Touch? I've found very little...a couple leather cases on eBay that apparently fit the Zen Touch (but were designed for PDA's), and a UK website se
-
Cannot find symbol - XStream xstream = new XStream();
Hello everyone! :D I'm currently working on something that can load 'configuration' (some kind of cache) via. XML files. To do so I made a instance of the Object class: public static Object load(File file) try InputStream is =
-
Satellite P100-202: problems with screen again
Hello everyone! I'm posting about a problem with my Toshiba P100-202's screen. I recently posted in the thread "Satellite P100-202: screen will freeze" and my current problem is actually quite similar to what is explained in the thread "Satellite P10
-
Portlet Errors at Initial Login
We are receiving random portlet errors upon initial login. It simply says "Error" in the portlet title heading and the portlet contents are not displayed. Refreshing the web page corrects the problem, but you'd think that a fresh login wouldn't mean