I have an iphone 5 with iOS 6. I just tried to sync it with my itunes account to put new music on my phone and it gave me a message that said the iphone could not be synced b/c "the sync session had failed to start". How do I fix this?

I have an iphone 5 with ios 6.1.4. I just tried to sync my phone to my itunes acct to load new music onto my phone and it gave me a message saying that it was unable to sync b/c "the sync session failed to start". It let me download all pictures, but would not let me do anything else and just kept repeating the same message. Why is this happening and how do I fix it?

You need to subscribe to iTunes Match to store your music on iCloud:
http://www.apple.com/itunes/itunes-match/
To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

Similar Messages

When I try to share my recently completed movie to Media Browser, the following message keeps popping up: "The project could not be prepared for publishing because an error occurred. (-50)". How do I fix it?

When I completed my iMovie (after hours of work), I can't move it to iDVD or the Media Browser. The following message always pos up: "The project could not be prepared for publishing because an error occurred. (-50)". What is this and how can I fix this? Please help ... I need to get the completed DVD in the mail now!! Thanks.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

I cannot sync my iphone with my computer. The error message says the ipone sync fails to start,how do I correct this?

I cannot sync my iphone with my computer. The error message says the ipone sync fails to start,how do I correct this?

try a reset on your iphone
make sure you have latest version of itunes
try updating your iphone over wi-fi before connecting to your itunes
reconnect ,try other usb ports
good luck

The project could not be created,please check the webroot folder(it may overlap with an existing project)

Error msg: "The project could not be created, please check
the webroot folder (it may overlap with an existing project)." This
occurs in the CF/Flex Application Wizard Pproject Information
Window on a Flex3 application. I checked to make sure that there
were no overlapping applications and the message still persists.
There are old threads on this from Flex 2 but the problem still
exists in newly released Flex 3. Please help!

I can't help you with this, but you are not alone. A friend
of mine has exactly the same problem

What is the source of this Crawl Error `The item could not be indexed successfully because the item failed in the indexing subsystem`

Once in a while my full-crawl fails and stops working properly. The crawllogs show this error for all items crawled.
The item could not be indexed successfully because the item failed in the indexing subsystem. ( The item could not be indexed successfully because the item failed in the indexing subsystem.; Caught exception when preparing generation GID[7570]: (Previous generation
(last=GID[7569], curr=GID[7570]) is still active. Cannot open GID[7570]); Aborting insert of item in Link Database because it was not inserted to the Search Index.; ; SearchID = F201681E-AF1B-45D2-BFFD-6A2582D10C19 )
The full crawls starts out ok, after a while (1.5 hours into the process, 50% of all the data) suddenly no more items can be added to the index.
The index seems to be stuck. The index files on disk are no longer updated (Located in D:\Microsoft
Office Servers\15.0\Data\Office Server\Applications\Search\Nodes\BAADC4\IndexComponent3\storage\data\SP4d91e6081ac3.3.I.0.0\ms\%default) The Index and Admin component start to report these error in the ULS logs:
NodeRunnerIndex: Journal[SP4d91e6081ac3]:
Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
NodeRunnerIndex: Remote
service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated
with exception: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
NodeRummerAdmin: RetryableInvocation[SP4d91e6081ac3]:
Exception invoking index cell I.0.0. Retrying in 16 seconds: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
Looks to me the index has troubles updating/merging 'generations'. But the exact working of the indexer is not documented (as far is I know). Let alone how to fix this.
Other (maybe related) observations
Just before the errors start the NodeRunnerIndex starts a 'checkpoint': Journal[SP4d91e6081ac3]:
Starting checkpoint because forceCheckpoint is true.which ends a few moments later with Journal[SP4d91e6081ac3]:
All journal users have completed checkpoint Checkpoint[7560-7569].
Also just before the errors start to appear a TimerJob starts: Name=Timer
Job job-application-server-admin-service. This timerjobs does some strange things to the search topology: Synchronizing
Search Topology for application 'Search Service Application' with active topology [...] and Activating
components. Previous topology: --- New Topology: TopologyId: [...] followed by Starting
to execute Index RedistributeData method.
And right after these two evente the errors start to occur. (each row is a ULS log enrty)
INFO : fsplugin: IndexComponent3-bd83a8aa-923b-4526-97e8-47eac0986ff7-SP4d91e6081ac3.I.0.0 (4236): Prepare generation: 324 documents
IndexRouter[SP4d91e6081ac3]: Caught exception when preparing generation GID[7570]: (External component has thrown an exception.): System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
GenerationDispatcher[SP4d91e6081ac3]: Failed to prepare GID[7570] in 453 ms, failed on cells: [I.0.0], stale services: []
Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
Remote service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated with exception: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
RetryableInvocation[SP4d91e6081ac3]: Exception invoking index cell I.0.0. Retrying in 2 seconds: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
The Question What is causing this? And how to prevent it? It happend twice in two weeks
nows. Out of the blue, no config change has been made, all disks have enough space.
Known Fix This resolves the problem, but doesn's address the root-cause of the problem!
Stop all crawls.
Wait a few minutes to let the crawl come to a complete stop.
Reset the index (clearing all!)
Start a full-crawl. In the meantime no search is available to the end user (boohoo!)

Hi,
I searched for the similar error log, the issue is finally solved by adding more drive space even though they though there is plenty space already.
https://social.technet.microsoft.com/Forums/office/en-US/d06c9b2c-0bc1-44c6-b83a-2dc0b70936c4/the-item-could-not-be-indexed-successfully-because-the-item-failed-in-the-indexing-subsystem?forum=sharepointsearch
http://community.spiceworks.com/topic/480369-the-item-could-not-be-indexed-successfully
From your decription, the issue seems to occur to your full crawl. There is one point in best practise for crawling:
Run full crawls only when it is necessary, the reasons to do a full crawl are as below:
https://technet.microsoft.com/en-us/library/jj219577.aspx#Plan_full_crawl
https://technet.microsoft.com/en-us/library/dn535606.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem.

I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Hi everyone I'm a new iPad user (ipad2) and have tried to download a few apps. I already have a iTunes/app store account but often when I try download a app I get a message that says "your request could not be processed"?

Hi everyone
I'm a new iPad user (ipad2) and have tried to download a few apps. I already have a iTunes/app store account but often when I try download a app I get a message that says "your request could not be processed"?

It could be a problem at the other end, try again tomorrow. Also , try resetting your iPad by holding down the home and sleep/wake button till the Apple logo appears and then let it wake up, maybe that may help.

The item could not be indexed successfully because the item failed in the indexing subsystem. ( The item could not be indexed successfully because the item failed in the indexing subsystem.; Caught exception when preparing generation GID[351]: (Indexer fa

Hi guys, I'm getting this error from the crawler. Any ideas at all what might be causing it?
The item could not be indexed successfully because the item failed in the indexing subsystem. ( The item could not be indexed successfully because the item failed in the indexing subsystem.; Caught exception when preparing generation GID[351]: (Indexer failed
to prepare generation.); Aborting insert of item in Link Database because it was not inserted to the Search Index.; )

Hi,
Please check if adding more disk space to the location of the Index Partition could resolve the issue.
Here is a thread with similar issue:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d06c9b2c-0bc1-44c6-b83a-2dc0b70936c4/the-item-could-not-be-indexed-successfully-because-the-item-failed-in-the-indexing-subsystem?forum=sharepointsearch
Then reset the index and start a full crawl.
Regards,
Rebecca Tu
TechNet Community Support

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

On my MacBook Pro running )SX 10.9.5 when I go to Contact Sheet II on Photoshop Elements 12 Editor it say The Operation could not be completed...The file or directory cannot be found...help.. ?Derek

On my MacBook Pro running )SX 10.9.5 when I go to Contact Sheet II on Photoshop Elements 12 Editor it says The Operation could not be completed...The file or directory cannot be found...help.. ?
Derek

See if this solution works:
https://forums.adobe.com/thread/1623951?q=contact%20sheet

AIR-LAP1242AG-K9 could not join a 2106 WLC: i ma getting ready for a deployment, how can i resolve this?

Hi,
I setup a mini wireless LAN network lab with a not for resale 2106 wireless lan controller and a sales air-lap1242ag access point. I do not have a DHCP and DNS in my lab environment. I have configured the WLC with the basic configuration using the CLI wizard, i also configured the WLC as a DHCP server for clients that will be connecting to the APs associated to the controller.
I powered up the AP and connect the ethernet port directly to the controller, the controller issued an IP address to the AP, the AP downloaded a new operating system from the controller but failed to join the controller.
I check both debug message on the controller console and the trap messages on the controller's GUI and it say the AP could not download a configuration from the controller and it is beacuse of invalid license. Below is the trap message:
Configuration Phase Statistics
Requests Received
Responses Sent
Unsuccessful Request Processed
Reason For Last Unsuccessful Attempt
Last Successful Attempt Time
Last Unsuccessful Attempt Time
Last Error Summary
Last AP Message Decryption Failure
Last AP Connection Failure
Last Error Occurred
Last Error Occurred Reason
Last Join Error Timestamp
Also, I tried to log into the GUI of the AP using the both the username and password ''Cisco'' but I cannot get into the device. I can only get in through the CLI. In the CLI, almost all the commands I enter gives an error the it is disabled. I don't know what to do any more, I want to know if the access point is faulty or i am not doing the right thing.
PLEASE HELP!!!!!!!!!!!!!!!!!!!

Thank you for the quick response.
The controller is running firmware version:
Software Version 6.0.199.4
Emergency Image Version 6.0.199.4
The AP can ping the Management IP address of the controller successfully via console. I have also entered in the AP the WLC's Management IP address information and it is still the same. Below is the message I'm getting on the console of the AP it self:
*Jul 9 13:06:09.803: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jul 9 13:06:10.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip:
192.168.50.246 peer_port: 5246
*Jul 9 13:06:10.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Jul 9 13:06:11.636: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 192.168.50.246 peer_port: 5246
*Jul 9 13:06:11.638: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.50.246
*Jul 9 13:06:11.638: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Jul 9 13:06:11.724: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Jul 9 13:06:11.726: %DTLS-5-ALERT: Received WARNING : Close notify alert from
192.168.50.246
*Jul 9 13:06:11.727: %DTLS-5-PEER_DISCONNECT: Peer 192.168.50.246 has closed conne
ction.
*Jul 9 13:06:11.727: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 1
92.168.50.246:5246
*Jul 9 13:06:11.772: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jul 9 13:06:11.772: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
I will also like to know if AIR-LAP1242AG is compatible with WLC 2106 controller.
Any help will be greatly appreciated, i really need to resolve this issue in my LAB now so that I don't go to my customer site to fumble.
thanks in advance.

I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

This could be several things, but let's get the obvious ones out of the way, first:
1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
3. Perform the procedure outlined here:
http://forums.macrumors.com/showthread.php?
4. After you're done, leave a message here as to the status of the repair.

Everytime i try to sync my ipod an error screen comes up and says the sync session had failed to start?

Everytime i try to sync my ipod an error screen comes up and says the sync session had failed to start? Why and what can i do to fix it.

If you are using a Windows based computer to sync your iPod try restarting the AMDS...
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

TS1646 When I try to purchase a song, it will not let me use the gift card that I redeemed. It directs me to my billing info and says that my session has timed out. How can I fix this?

When I try to purchase a song, it will not let me use the gift card that I redeemed. It directs me to my billing info and says that my session has timed out. How can I fix this?

For some reason this worked for me. I went into my account and changed my first name, maybe it causes itunes to reset. What ever it does my itunes works now.

On facebook I can play the game castle age but not Castle age heart of darkness...it won't load.How do I fix this. Thanks

On Facebook I can play the game castle age but not Castle age heart of darkness...it won't load.How do I fix this. Thanks

In order to load games on Facebook you need to set the Flash plugin to allow third-party content
1. Go to the Flash player Global Storage Settings panel.
2. Make sure '''Allow third-party Flash content to store data on your computer''' is check marked.
See:
'''''[[Problems using Facebook in Firefox]]'''''
'''If this solved your issue, please select ''solved ''& chose the appropriate ''solution'' to close this ticket/question posting'''.

I have an iphone 5 with iOS 6. I just tried to sync it with my itunes account to put new music on my phone and it gave me a message that said the iphone could not be synced b/c "the sync session had failed to start". How do I fix this?

Similar Messages

Maybe you are looking for