I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug
I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug in holes, I've left it for the night and tired again this morning.
Error code 9006 is related to the computer's security software settings, 39 is not listed inResolve iOS update and restore errors try turning the security/anti-virus software off if you are using something like that. Then you may need to restore via the recovery mode since that is what the graphic of a USB wire connecting to iTunes means, it has already entered recovery mode...see http://support.apple.com/kb/HT1808 for instructions on recovery mode restoring.
Similar Messages
-
Got a MacBook with 10.5.8 I am anable to burn cds, dvds, and dl dvds. Everything worked before I reformatted my computer but now it comes up with error messages like unable to communicate or something about the laser power levels. Help! Anyway to check to see what is going on?
Hi I am having the identical problem with my 24" intel iMac 2007..... Did you ever figure out what the problem was? I'm on round 3 now and with a completely blank grey screen and it won't start up from the disk 1.. I also have diskwarrior and techtool pro as well as the osx leopard and snow leopard disk... The HD is new.. Replaced by apple 3 months ago.. Don't know the cause the first time this happened about 9 months ago.. 2nd time, 6 months ago it never rebooted from the office for mac 2008 critical update... Did a clean install after backing up to TC... Took it to apple replaced HD even though it appeared ok, they checked all hardware and I ran techtool pro daily ever since. Last week software update had several updates avail. Office for mac being one of them.. I updated and have never booted since.. . I swear to never ever use another Microsoft product as long as I live if I can just fix this once more... Help me please
-
My iPhone 4 says that there is not enough memory to download apps like Facebook and Instagram. When plugged into iTunes it says that >4GB is filled with "other". How do I clear the "other"? What is this?
Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414
More Info about ‘Other’ in this Discussion
https://discussions.apple.com/message/19958116 -
Dear AppleCare,
As I bought my iPhone 5 16GB,White in the USA from Sprint, full price with tax,unlocked ,it was excepted to be a global phone. But now I come across with some problems in Chinausing local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.
Information of my iPhone:
SN:F1*******8GJ
IMEI: ****
MEID: ****
ICCID: ****
My Apple ID account:****
<Personal Information Edited By Host>I had the same problem. Kept getting message of waiting for activation or check network connections. I also tried every solution out there and nothing worked. This did though: I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work). It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer. I let itunes find it, did a complete backup in icloud, then did a restore. Entire process took a couple of hours, but I now have imessage and facetime back. I was about ready to give up on Apple and go get a different phone ~
-
I made an iMovie 10.0.4 project with a bunch of stills and when I came back later today they had turned black like they weren't there.
Like this:
When I play them they're black as well.
Normal Still:
"Missing" Still:
What's with that? What's the best way to fix it?
Thanks.Hi
Magic solution - NO
Some thoughts - YES
Is the iPhoto Library still where it was previously (or on external Hard Disk - now turned off) ?
One approach might be to - Repair iPhoto library (but this takes hours - so try below first)
Trouble-shooting guide
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
I have a 5s and am on iOS8.2. I used to be able to play iplayer/4od on the tube but now I get a connection error. It seems to only work if I have wifi/4g. Any ideas? Thanks.
It's a Finder feature, related to Quick Look. You can hit the space bar in the file list to get a preview.
If that doesn't work, you may have an issue witha preference file or similar. I find rebuilding the launch databse works quite well resilving tis kind of thing, as does trashing Finder preferences -
I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0
We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?
Did you move any system files? It's looking for the system folder. You can startup from the system CD by inserting the CD and restarting the computer and at the same time hold down the C key. The computer will boot from the CD. At that point run the disk utility and check your hard-drive. It the problem persists then do a fresh clean install of the system folder and that should help you get back on track.
Good Luck. -
when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?
Hi tgoit2015,
If you are having issues restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
my i pod touch was erased in the find my ipod app this has set my i pod where i cant do a thing but see a black screen with a rotating circle in the middle of the screen. i tryed to restore and itdosent download actual file to the i touch and i cant do a thing with it please help me fix this and if thereis a way with out lossing my data would be great but however it can be done please let me know asap thank u.
Take it to an Apple Store and they may take care of it for you.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I am currently studying abroad in Italy and my imessage has been working with wifi up until now. I just wen to PAris for the weekend and when I came back it says that Imessage is waiting for activation. How do I fix this? Thanks!
If iMessage has become deactivated on your iPhone, which, apparently it has, the phone will need to send an SMS to activate it again. Therefore, you'll need a cellular connection.
-
HI ive been phonless since night and im really worried, wondering if anyone can give me some advice! so yesterday my iphone 4 running on 5.1 battery died on me completely,so i placed it to charge and walked off and when i came back about 3 hrs later it was still not charging. The entire night i tried to reboot it and nothing works! itunes wont even recognize it on my mac!:(please help!
Try a reset by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.
-
I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?
You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them -
I left my macbook pro closed and when I came back the screen had a huge crack all over the screen, anyone know why this could have happened?
Someone dropped something onto your computer.
Someone pressed on the closed computer.
Someone placed heavy objects on your computer.
We can only guess since the someone was not us and we were not there when it happened. -
the connexion wi-fi was working fine. Suddenty, the server stopped for a few minutes and when it came back on, I had no trouble using the internet on my laptop, but myIpad won't connect. The wi-fi is listed, but it says impossible to connect. I tried turning off the ipad, but the problem is still there.
Go through some basic troubleshooting steps.
Settings>WiFi>Off, restart the iPad and turn WiFi on again.
Settings>WiFi>Tap the blue arrow next to your home network name>Forget this Network, Restart the iPad and then try to join your network again.
Settings>General>Reset>Reset Network Settings. Restart the iPad and try to join your network again.
Finally, you can try rebooting the router. Unplug it for about 30 seconds and then plug it in again.
Maybe you are looking for
-
BEA-010026 Exception occurred during commit of transaction Xid...
Srs, Does anyone know how can i change the IP address bellow ? is there any file with this configuration ? ( i dont know so well weblogic ) This is a unkown IP (10.26.71.28) and probably for this reason, the following error appears: <Mar 31, 2010 1:5
-
Fields not visible from custom WIW Infoset
Hello, a custom infoset version (ZZZHR_XX_PA_ESS) in ESS Who is who works with molga=15 to display user details, its manager details (starting form standard field syhr_a_p0001_af_omngr_nr) and assistant details. When used with both the WIW functon an
-
T520 internet lag problem - webpage timeout
My T520 has an issue with the internet. Whether docked, connected directly to the wire, or connected wirelessly every time i navigate to a webpage it takes about 10-sec for the page to load. This happens in my office (~250 people here) or at home.
-
Hi, I reinstalled my laptop, I wanted to save the abstree and I found a line in /etc/makepkg.conf: # the top-level directory of all your PKGBUILDs export ABSROOT="/usr/abs/" Cewl, this make it easier for me to keep my own costumized abs-repository at
-
Why can't I attach files with my hotmail account on my mac pro since I upgraded to lion?
why can't I attach files with my hotmail account on my mac pro since I upgraded to lion?