I have an iPhone 5s and in my iTunes music library have the songs checked that I want downloaded onto my phone. Instead of doing this, it is syncing all songs whether they are checked or not even tho I have the "sync only checked songs" box checked.
I have an iPhone 5s and in my iTunes music library have the songs checked that I want downloaded onto my phone. Instead of doing this, it is syncing all songs whether they are checked or not even tho I have the "sync only checked songs" box checked. So basically it's syncing all of the songs when I just want the checked ones on. This is very frustrating.
When your device is connected, check the tabs at the top ("Summary" "Apps" "Music," etc. Under the Music one, check to see if "Sync Music>entire music library" is checked. If it is, that may be why all the songs are syncing.
Similar Messages
-
i'm told my "system requirements" aren't up to par. i think they are. i cannot even attempt to install the free trial. please help
SOrry, but this is pointless. You have not provided the exact system specs, so we can't tell you anything. Just claiming they would be sufficient doesn't really mean anythin here because we can't verify them. There clearly is a reason why you get those warnings...
Mylenium -
I can't restore factory setting on my old iPhone 4 and i dont know why? I have a iPhone 6 attached to my iTunes - is it something to do with that? I would like to pass my iPhone on to a family member but would prefer if it was wiped before - thank you for your help
What happens when you try to reset it? Have you gone to Settings/General/Reset on the phone and tapped Erase all content and settings?
-
I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2 -
My "itunes library" folder is empty. My libray music (prior to upgrading itunes) is now in an .xml file in my itunes location under my music. How do I extract/convert this .xml file to a Itunes database and restore my Itunes music library??? Thanks, Tom
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
HT3939 I have a iPhone 4 and need to turn off iMessage how do I do that
I have an iPhone 4 and need to turn off iMessage how do I do that
Omg that was easy thank you so much and happy holidays
-
How to check module abbreviations and whether they are installed or not ?
Hi All -
There was a question raised , that is self service parts planning module available/installed/registered in our current EBS or not ? How to check whether self service parts planning module is installed or available or not ?
Also i would like to check all the modules which are currently installed and can be used ?
Regards,Our question says , we do not know the code for Self Service Parts Planning Module . How to check particularly these product is installed or not ?
from the link given , it describes that for self service parts planning code is "SPP" . Can you please confirm ?It is part of "Advanced Supply Chain Planning (ASCP)", so run the query in (How to Find Out Product Installation Information in Oracle Applications? [ID 1275690.1]) and pass the module name.
Similary can we get the product codes for all shared products, installed products and non-installed products. The doc referenced above in this reply will list all the module names, with the product codes and the status.
What does shared products actually mean ?Patching Shared Oracle E-Business Suite Products [ID 1069099.1]
Thanks,
Hussein -
My calculation "Total" box adds sum of all text fields whether they are visible or not, do I change
I have check boxes that show and hide text fields. (Thanks to Gilads Java script). In options I have a default value for each text field.
My "Total" Field field adds all fields even if they are not checked and visible. Need to have it only include them if they are checked and visible.You can't attach forms by email, or any other means, so it didn't come through.
Since your fields have default values and aren't calculated based on the state of the corresponding check box, you will have to use a custom calculation script for the Total field that can check to see if any of the fields are hidden, and if so, don't include their values in the sum. For example:
// Custom calculation script
(function () {
// Set up an array of field names to include in the total
var aFields = ["text1", "text2", "text3", text4"];
// Initialize variables
var i, f, sum = 0;
// Loop through the fields an calculate the sum
for (i = 0; i < aFields.length; i += 1) {
// Get the current field
f = getField(aFields[i]);
// Add the value of the current field to the sum if the field is visible
if (f.display == display.visible) {
sum += +f.value;
// Set this field value to the sum
event.value = sum;
You can send me a PM if you want help offline. -
I recently restored my iPhone 4 and lost my iTunes music store
Recently restored my iPhone 4 and everything went well except the iTunes music store is missing, the app store is still there. What do I need to do to get it back or where do I look?? I'm lost
If you can't find it on any of your homescreens or app folders, nor via the spotlight search screen (swipe your first homescreen to the right), then have you got Settings > General > Restrictions > iTunes set 'off' ?
-
I'm sure I asked this question before. How can one sync their ipad, iphone with more than one computer. I spend 6 mth in Canada and 6 months in the states and don't really want to haul around a desktop computer. Any ideas?
Mmm... Let's say the way that the devices in the US are the way you want them to be. Now you want to sync the device to a computer in Canada. This is the hard or easy part depending how you look at it. Yes, you can sync and make a backup for the devices to the computer in Canada. But you will lose the photos, music, and videos that you have in iTunes in the States. What you will need to do is copy the folder for those items onto a flash drive and place that folder in ITunes Canadian computer. Also you won't be able to use the app store accounts from on country to another.
I'm sure there has to be an easier way to do this and I hope someone will chime in. I'm just thinking off the top of my head on how to do this... -
HT4972 i have an iphone 3 and need to update to 1OS5. how do i do that?
i cannot figure out how to update the Ios 3.1.3 to a 5. or higher
The iPhone 3 can only be updated to iOS 4.2.1. The iPhone 3 GS can go to iOS 6.1.2.
To update you need to connect to a computer running iTunes, select the iPhone from the Devices on the left side bar, then select software Update from the Summary window. -
I have downloaded games from POGO just fine but when i go to install them it will start and then say installion aborted,all instelled componests were removed via the rollback feature and i have no idea what this means or how i an fix it. This has never happened before and I am not sure on what do to
Yes, the website works fine on my PC computer.
It was working fine on my iPad too until the message showed up. The website took a long time to load and when it finally did.. That message showed up twice. The site works now but at times will stop loading.
I do feel like my Internet connection on my iPad is spotty today. One minute it is loading super fast, the next, the page won't load at all. Could be my connection though.
I do not have the debug console set to on. Should I set it to on? -
How do i make the back and forward buttons function? they are visible but not functional.
I have firefox 8.0.1 and my back and forward button are not working. They are visible but not functioning. I have tried starting in safemode and without any add-ons and the back and forward buttons are still not functioning. What do I need to do to make the buttons functional?
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
I have a iPhone 4 and I use a hotmail email account. Recently it's not been notifying me of me of emails. I've checked notification settings all set to get them but when you look at overview of notifications the email ones not shown like other apps do? Can anyone help its driving me mad?
I had the same issue. I just went to the Apple Store today to talk to someone about it. They had me delete the account and then add it back in. It's been working fine ever since!
-
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.
Maybe you are looking for
-
Creating a job for a procedure with an input parameter
Hi, I want to create a job for a procedure ( sp_proc ) with a input parameter. The input parameter is a date value. As per the syntax for dbms_job.submit procedure; dbms_job.submit ( job IN BINARY_INTEGER, what IN VARCHAR2, next_date IN DATE, interva
-
How do I delete the contents of pages waiting in the queue to be loaded?
While attempt to edit a table on the last pages of my document, the InDesign program crashed. I attempted this several times, including just deleting a row at a time, but run into the same problem. Since it was the last pages of the document (book),
-
Convert xml to pdf and print on SAP printers
Hello All, I've the following requirement: PO layout (we are not using smartform or sapscript or adobe for printing. The PO template is an infopath file which generates XML and XSL) is in the form of XSL file and the PO data is in the form of XML (ge
-
Can I jump to a specific time in a slide?
Hello everybody, I'm pretty new to the Adobe Captivate Project and although it works very intuitive and there are a lot of resources available, I couldn't find the answer to my question. I'm making an instruction video/software simulation for clients
-
Balance order confirmed qty in PI sheet
Dear experts, Pls suggest while performing confirmation in PI sheet system shows the confirmed qty in the field not the balance confirmed qty that system useually shows while performing good mvt using co11n or cor6. Thanks in advance for your inputs