I have an iPhone 6 down loaded ios8.02 now all I get is a flashing screen and nothing works

i iPhone 6 red flashing screen nothing working after down loading iOS 8.02

Hi nicholasfromdenhaag,
It sounds like you got at least part way through the update before it stopped going any further. Try the steps in this article for an update that didn't finish.
If you can't update or restore your iPhone, iPad, or iPod touch
Take care,
Nubz

Similar Messages

HT4623 I deleted all contents from my iphone 3gs so that i could give it to my nephew....now all i get is the apple logo and nothing will come on. have i deleted the programme completely if so how can i get it back???

I think theoperating system from my iphone 3GS has gone

Restore the device with iTunes > http://support.apple.com/kb/HT1414
You may need to put it into Recovery Mode first > http://support.apple.com/kb/HT1808

My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money.

After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?

After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?
== This happened ==
Every time Firefox opened

-> press '''F11''' to bring the computer out of FullScreen
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
Now Restart Firefox. Check and tell if its working.

When i active my mac pro all i get is a white screen and it loading .. and when it fully loaded it turns off and the same thing keep on happening again

when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours

Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you!

After my latest update my music wont load on ipad i just get a blank grey screen and no music titles yet when i check usage it says music is there, ive tried unsync it then redoing and still nothing

after my latest update my music wont load on ipad i just get a blank grey screen and no music titles yet when i check usage it says music is there, ive tried unsync it then redoing and still nothing

Rebooting will not make you lose any content. Rebooting is when you hold the home button and the sleep button down at the same time until the Apple logo appears on the screen.
You can these suggestions. One might work for you.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.

My ipad shut-off and now all i get is the apple logo and a spinning circle. Any suggestions on why and what I can do about it?

my ipad 2 shut off and now all I get is the apple logo and a spinning circle

Try holding down the home button and the sleep / wake button at the same time to restart the iPad .

My Macbook has died. Mail and Firefox wouldn't boot up today and so I turned it off at the button. Now I've just got a spinning wheel and nothing works. In the middle of doing a magazine too, altho I did some backup on a stick. Any suggestions?

My Macbook has died. Mail and Firefox wouldn’t boot up today and so I turned it off at the button. Now I’ve just got a spinning wheel and nothing works. In the middle of doing a magazine too, altho I did some backup on a stick.
Any suggestions?

Try rebooting while holding down the Command and R keys (two keys).
If you see an icon for Recovery, select it and continue.
Then select Disk Utiltiy and press Return.
Now select the hard drive and the Repair Disk.
Quit DU when that is done and restart.

I have a Ipad2, my computer that contains all of my apps, music etc crashed and dosent work. I bought a new laptop, how do I retrieve that iTunes account and or apps, movies etc.

I have a Ipad2, my computer that contains all of my apps, music etc crashed and dosent work. I bought a new laptop, how do I retrieve that iTunes account and or apps, movies etc.

With your new computer, you'll download a fresh copy of iTunes and then authorize iTunes using your Apple ID and Password. Read the following link:
http://support.apple.com/kb/ht1420
You can then connect your iPad to your new computer via USB cable and transfer your purchases (do not connect your iPad until you have authorized the computer. The music you had in your old iTunes account will not be in your new account as music is stored in a file on your hard drive, which you said has crashed.

I tried to restart my iPad -- now all I get is a spinning wheel and can't use my iPad at all

I tried to restart my iPad -- now all I get is a spinning wheel and cannot use my iPad at all??

Try resetting.
Press and hold the On/Off Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

HT201412 Perfectly fine working iPad and I attempted to load the software update provided for settings. Now, all I get is a black screen with an, on again, off again apple. Restore? iTunes doesn't even recognize the device. Force quit does nothing. Now wh

Hello,
Perfectly fine working iPad and I attempted to load the software update provided for settings. Now all I get is an on again off again apple. Attempted hard reset to no avail. iTunes no longer recognizes the device. So......? what? how? where?
Thanks, Richard

And one more point, I am not an Apple user. This is my first experience and have had to learn as I go. So any explanations please break it down for a noob. I am fairly computer geeky but when it comes to Mac or Apple or iAnything... I have zero experience.

When down loading new version i keep getting MSVCR80.dll not found and I now have no itunes

I have just up dated my i tunes and whenever i try to start it i get this essage : MSVCR80.dll not found and itunes refuses to open. i have tried re-installing etc but nothing works. Any ideas?
muzz

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I have an iPhone 4S with a smudge or smear under the front glass screen and a cracked backplate. How do you fix the front screen? HELP!!

How do You fix a iPhone 4S with a smudge under the front screen and a shattered backplate?

You can purchase replacement parts from a third-party vendor, or a replacement iPhone from Apple. If you choose the former, there are many online videos to assist you with the teardown and repair.

I need to get my photos off my iphone but all I get is the apple sign and nothing else? Help!

I dropped my iphone in a cup of coffee and it turned on for a short amount of time and now all it will do is show me the apple symbol for about 10 seconds and isnt recognised on my laptop please help!

Bethbaa wrote:
Because every idiot knows not to true and turn a wet phone on. If you have nothing helpful to say then don't say anything at all. Jeez.
Just like every idiot knows that those of us who frequent these support forums are psychic and know exactly what you did and when without you having to tell us.
You killed it. It's dead. Your photos are gone. Deal with it.

Mac keeps crashing and now all I get is a grey screen

Hi my mac kept crashing last week. I called apple and they deleted lots of things to do with cookies. It's crashed 3 times since then. Tonight it went off when I was mid flow with work. I know can't turn it ok. Apple have tried to reboot but now said I have to take into apple store. Main problem being I'm on crutches and cannot drive at moment. Any ideas would help........

What Mac do you have, with what version of OS X?

I have an iPhone 6 down loaded ios8.02 now all I get is a flashing screen and nothing works

Similar Messages

Maybe you are looking for