I have an iPhone and an iPad min. Using my iPhone I can message any of my contacts. Using my Ipad, I cannot message new contacts. What can I do to my iPad to fix this problem?
This problem with my iPad arose only recently, and perhaps at the same time as I updated the iOS software (that could be coincidental).
I have checked the imessage registration and done all the tricks people suggest when your iPad doesn't message to anyone. My problem seems unique to new contacts, as I can freely message older contacts.
Any thoughts or suggestions?
OK, I feel like a bit of a dolt, but I pass on this info for my co-dolts:
I contacted Apple Support and told them my problem. They advised that the problem is most likely the fact that my new contacts are not using Apple devices (iPhone, iPad, etc.). If that is true, that would explain why I can send them messages via my iPhone but not my iPad.
As I understood it, the iPhone can use either iMessage (green print) or SMS (blue print) to communicate with other devices, whether Apple or not. However, the iPad does not have that option (I guess cuz it's not a cell phone). If the recipient is using, say, a Samsung product, the iPad can't send a message to it. (My iPad actually says this under the Messaging heading in Settings, but I did not grasp the significance at the time since I did not compare it to my iPhone).
To test this theory, I used my iPhone to message my new contacts. They confirmed that they were not using Apple devices. It was just a coincidence that all my new contacts were not Apple users.
Similar Messages
-
I've just updated my iPhone to the 4.3.5. update, and I now can't sync any new music, ringtones, photos etc. Anyone know how to fix this problem?
Try this
https://discussions.apple.com/message/15135297#15135297 -
After my last update mu iphone and ipad has an deleted apple id, but my itunes have the new on and I cannot change it on my devices. Any help would be appreciated.
If it's an old account which you'd updated with a new email address then try logging out of it on the iPad (and iPhone) by tapping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on the iPad (and iPhone). If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.
-
It is any problem with the application vtok? Since I update my iPad2 system to iOS6.0 I was unable to use this application. The problem is when I tap on the vtok icon, the application opens and closes right away. I removed and reinstall the application twice, but this doesn't fix the problem. When I try to find the application on application store, it's give me a message that the vtok application is not available in USA.
Not available in Spain either. I can't find anything googling for this problem, Vtok's page and facebook page seem to be unmaintained.
It is strange such a widely used app doesn't show life signals.
Good luck -
I need help when trying to upgrade my apps or add new ones says its been disabled. how does this problem get fixed
Hello there, casper1822.
It sounds like your Apple ID has been disabled. The following Knowledge Base article offers up some great steps for resolving your issue:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro -
I cannot print adobe pdf documents. Password protected. How do I fix this problem?
You'll need to remember it or recreate the PDF from the original file.
If there were an easy way to get around that, passwords wouldn't be worth much. -
I updated my iPad mini to ios 7.0.2 couple days ago. Everything was fine until yesterday. I noticed that it seemed to have a mind of its own. It kept opening and closing app. I'm not sure what to don to fix this problem. I've tried restoring my iPad mini but that didn't help. Can someone please help me?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
My ipad mini is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini
I found this is another thread - same issue.
Re: iTunes has stopped working. Why?
Sep 11, 2013 6:07 AM (in response to thurdy)
Resolved!
After contacting Apple, I received a reply from their engineers:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
And that did the trick.
Message was edited by: Stryder777 -
Why won't my iPad mini download music or video's? I click the download button and it will say its downloading. Then once finished it will just disappear? How can I fix this problem?!?!
Are you using the same apple ID and password?
it seems all is in order, but perhaps the password isn't valid.
if the reset didn't work, try signing out of iTunes and App Store, then back in.
have you tried going to App Store - purchased and tapping on the cloud icon for the apps you want? You will still be asked for your password. -
I have my daughters Ipod, my iphone, my wife's Iphone and Ipad on the one Apple ID. Since the latest update we are receiving Imessages from our daughter's Ipod with my wife's caller ID on the one message strand.
Is it possible to differentiate between all the devices?Can I fix this problem?I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases. -
I got my iPad from my friend and he done a full restore before I got it, but know that I have put my iCloud account on here I have contacts and his too. How can I fix this problem? !!!!!
As I said in the other thread that you posted in the other forum, your friend clearly has not restored the iPad correctly. I suggest that you undertake another restore and start again.
-
I got my iPad from my friend and he done a full restore before I got it, but know that I have put my iCloud account on here I have contacts and his too. How can I fix this problem? !!!!!
Welcome to the Apple community.
Given what you've have described, your friend cannot have restored the iPad correctly. You need to decide whether you are willing to delete his contacts manually, or carry out another restore. Personally I think I would go for the restore. -
My iPad says that I have authorize too many times what can I do to fix this problem?
MY iPad says that I have authorized it too many times, how do I fix this problem?
OverDrive has its own application for its media. See <http://omc.overdrive.com/v3-available-now/ios.php>. This has nothing to do with the Adobe Reader for iOS. Sorry!
- Dov -
I am unable to switch on my IPad as it states that 'iPad is disabled'. How do I fix this problem when I have no access to the iPad? Any help or advice will be gratefully received.
Forgotten Passcode or device disabled after entering wrong passcode
-
I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?
Hello Abdo_Zain,
I would be concerned too if I was not able to gain access to my iPad. If you are unsure what your Apple ID is, you can find the steps in this article:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
You can reset a forgotten Apple ID password by going to the following link:
Apple - iForgot
https://iforgot.apple.com
Also, you may be able to skip the step of entering your Apple ID if you are setting up the iPad for the first time.
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have disabled my new ipad by entering the wrong pass code to many times. How do i fix this problem?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
My girlfriend and I have separate iTunes accounts and would like to combine then so we can have all the same music and books on our iPads and iPhones. Is it possible to combine the two accounts or somehow sync hers to mine and just use one from now o
-
The "VISA Configure Serial Port" VI will only run at 9600 Baud
I have written a Serial Port monitor "RS232 RW.vi" that works for the most part. The problem is that it will not respond to alternate port configuration settings.... For instance: the default RS232 Serial port configuration is: (COM1,9600 baud,8 dat
-
Header value in fact to be summed once per header
I have two table, one containing information about the produced quantity and the other containing information about the ingredients used to produce such quantity (in the header), what I need is to display the produced quantity beside each ingredient,
-
Bug in WITH clause (subquery factoring clause) in Oracle 11?
I'm using WITH to perform a set comparison in order to qualify a given query as correct or incorrect regarding an existing solution. However, the query does not give the expected result - an empty set - when comparing the solution to itself in Oracle
-
DB Performance Issues after 10g Upgrade in EBS Instance
We have upgraded our Database from 9i to 10g as first part of EBS 11.5.9 to 11.5.10.2 upgrade. Currently our production is running on 11.5.9 apps with 10g DB. Facing performance problems now. one of the them is, one Valueset query not using funcion b