I have an iphone and have a 1 in a red circle on my photos app. What does this mean?
I have a 1 in a red circle over my photos icon on my iphone. What does this mean?
FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311
Similar Messages
-
Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience.. -
When I try to sync my iPhone 4S with my computer, I get this message: "This iPhone cannot be used because the Apple mobile device service is not started" What does this mean, and how can I fix it?
means that apple mobile device service needs to be started try this article to get it turned back on
Restart apple mobile device service -
haven't rented movie on apple tv in 6 months and says go to itunes store to "verify" .....what does this mean?
Ok problem solved; signing out of iTunes account and signing back in solved it.
-
my icloud keeps saying "loading" next to storage and says "icloud storage details are currently unavailable. try again later." what does this mean?
Apple has been having a number of server issues today and this may be related to that. Give it some time and try again later.
-
Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
HereQ - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here -
I have a cirlce with a line through it at startup. What does this mean?
I have a circle with a line through it at boot up. What does this mean?
It means that there is no bootable disk found. This
could be either a totally corrupted disk or a hardware
failure.
If you were running OSX 10.7 or 10.8, you could try booting
into the Recovery HD by holding down Command+R at boot
or holding down the Option key and select the Recovery HD
to boot from.
If doing this also fails, then you likely have a hard disk failure
or perhaps some other hardware issue. -
What does this mean?
My iphone 4s just developed a similar problem. Ultimately, after a visit to the Genius Bar at which I was offered a replacement phone for $149, I took the phone to a non-Apple repair shop which diagnosed the problem as tarnished pins in the docking connector and replaced the connector for $49.
The symptoms I experienced were that the phone would not pull a charge. I tried different cables, wall outlet versus computer USB connection, etc. The screen stayed black until I depressed the sleep button, at which time the red battery / lightening bolt symbol would flash three times and then the screen would go black.
If your battery is dead, that icon will not show up at all. If you get the icon, it means your battery is run down and needs to recharge, but the defective docking connector is preventing the battery from taking the charge. -
why doesn't it say delivered when you send an imessage from and iphone to an ipad?what does this mean?
It means that the device the message was sent to did not reply that it had been received by the device.
-
Im having trouble setting up my mail. I have just upgraded from a iphone 4 to 5. mail keeps asking for my password when i put it in it comes up saying
the operation could not be completed (MFMessageErrorDomain error 1032)
what is this??Nice try! Take a hike.
-
I'v also moved my library to an external hard drive as I'd run out of space. I don't know if this has caused the problem.
Any advice appreciated.Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match. Your iTunes Match library will then appear on your iOS device.
-
I have a 5-year-old laptop, given to me by someone else as a gift, that uses: a 32-bit operating system, Windows 7 (with Service Pack 1), and Internet Explorer 8. A system message told me I need to upgrade Adobe and Silverlight. I accomplished the Adobe upgrade without problem. For the Silverlight upgrade, the instructions say to first uninstall the existing Silverlight software before installing the updated software. However, in the System Requirements, for Windows, it says the phrase that I quoted in the "Question" box above. I am not sure what it means. I am confused by the words "for IE only"; I'm assuming IE means Internet Explorer, but I don't know what this short phrase is trying to say. Is the "bottom line" that my 32-bit operating system is insufficient to receive the Silverlight upgrade, or is it enough? I need to know. I don't want to uninstall my existing Silverlight software yet, because of the possibility that I can't install the new software; I don't know what adverse effect would occur if my laptop doesn't have any Silverlight working on it at all. So I'd appreciate being filled in on this. Thanks!
Your computer can run silverlight just fine. They are just saying that Silverlight is a 32bit application, except for Internet Explorer, where it can run as 64bit. It doesn't make any difference for you, so just go ahead and install it.
-
Hi
My name is Lubna Ruby abd would like help with my IPhone 4, I am unabke to restore my phone as it keeps on coming up with an error message as code 1611, please help me to solve this error as my phone has gone compleatly blank, if possible please contact me to resolve this matter.
Thank youI bet if you Google "iPhone error code 1611" you'll get a clue as to how to fix your problem
-
I have a 32gb ipod touch 3rd gen which says activation required, what does this mean?
It started to display this after getting wet and now will not sync or turn on properly and the screen is unresponsive. Is it dead or can it be fixed?
Sorry to hear that.
Lost or Stolen -
How can I get my ipod nano connected to itunes?
What you have on your computer is your iTunes library, not an "account."
Did you download and install the latest version of iTunes, which is available here?
https://www.apple.com/itunes/
If you have an earlier version, it may not support the most recent iPod nano, which could explain why Windows does not have the device driver to identify it.
Maybe you are looking for
-
Evaluated Receipt Settelement - Automatic PO creation in GR
Dear Experts, Please answer my querry - here in my scenario, Purchase order is created automatically, at the time of Goods receipt Posting. Now i want post invoices automatically (ERS) with the reference of Purchase Order/Goods receipt. settings made
-
Mail attachments not showing as icons but as blue square with ? in
This is probably going to sound very odd but recently all attachments that I send or forward come up with the attachment showing as a blue block with question marks on the site - something like a piece of lego. Anyone got any ideas what the problem i
-
Problem when using function module : SO_NEW_DOCUMENT_SEND_API1
hi,all when i use this function module to send external email ,a strange problem has been encountered. After executing this FM,i find that the return parameters SY-SUBRC = 0 . but when i use tcode SCOT to check the email in SAP email box,nothing ha
-
This seems like a common bug. I've tried all of the "fixes" that apple suggests. Deauthorize/reauthorize, rebuild library, restore factory settings, etc. My photos will sync but any purchased content will not. Yes, I can view trailers. I'm glad that
-
Created a new application, attached a preexisting DB from another environment, getting 404 error.
Everything in CA looks good to me. The application is listed, and the DB shows up with 1 site collection, which is correct. I mounted it using Mount-SPContentDatabase "<ContentDb>" -DatabaseServer "<DbServer>" -WebApplication http://SiteName Troubles