I have an iPhone for work. I need you to solve a number of questions:
1) If it is charging less than that when I disconnect charger or for charging overnight then affect the battery and the device is not?
2) I have used this device for a while, after I upgraded the version 6.1.6 it fails:
Not fully charged battery but the battery icon does jack picture.
Sometimes lost in the notification bar icon and name SIM waves, instead the words "Searching".
Tkanks for your support.
Send from my Iphone: 3GS iOS 6.1.6.
Hi Namss
I can't understand what your asking in question 1) could you rephrase it.
In answer to question 2) occasionally the jack picture may appear when the iPhone is at 97% or 98%, this is just because the battery is out of calibration, it should appear normal after a while, it's nothing to worry about the percentage charged is only an estimate. "Searching" just means that the iPhone has lost connection to the mobile network and is searching for it again, this usually occurs in an area of low signal.
ThatBorisGuy
Similar Messages
-
I have a personal itunes account with an iPhone5s (perosnal mobile numer) and an iPad 4 mini (no SIMM). I have unlocked my old iPhone 4 to use for work on a different SIM and new number,
Do you know if I can have all devices associated to my single apple ID and still use both numbers without messing up my profile. It has just changed my number over.I would not be able to give you idiot proof guide, since different games are different. Some of them have icloud integrated already, but those already taken care of. Some of them use specific logins and once you log - you get your info. General recommendation is to contact support sites of those games for enabling icloud instructions or enabling of transfer. There are other purely apple ways - like sync your phone in itunes and then sync apps with ipad, but those are only one time transfer. There is another way that is not typically recommended - restoring ipad from iphone backup. It may transfer your game content, but once again sync in the future has to be done by game.
So if I were you, I would address that individually with every game provider. -
I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks
Thanks. I messed up with my husbands iphone because I was told the wrong thing. Now everytime I sync his phone it makes it look just like the other phone I had. Do you know how I can fix taht for his phone? Any settings I can turn off that will prevent all of my apps/contacts, etc from auto populating his phone?
-
I have an Iphone 36s. I need to get contents of messages that were sent on the phone in June of this year. I read online that the phone has an internal storage that keeps all data when phone is used and that this internal storage can be accessed. I need the contents of particular messages for evidence in court. How do I get into the internal storage? I've tried some of the methods that people post online, but none of them have been successful. Help!
If you still have a backup from that point in time as part ofr your computer backup history, you could restore the backup folder, restore the phone from that backup and have the messages on the phone.
More details about restoring from old backups can be found here: iPhone and iPod touch: About backups -
I bought a Iphone 4S in Colombia two months ago, It never worked properly, I cant put turn it on. When I went to Movistar they told me that it was a problem with the software. Now, they have the Iphone for repair at Movistar. The questios is, If I bought a NEW Iphone why they gave me a Iphone with this problem. I asked about the warranty but they told me that Apple doesn't respond. Please tell me something. The IMEI is: 013071008363505 is a Iphone 4S 16GB. Black.
I would guess the fan is the cause of the noise. Suggest you take a look at it.
This site has a wealth of information about getting inside a Macbook or Macbook Pro.
http://www.powerbookmedic.com/mac-repair.php -
Hello . I have an iphone for which is currently IOS 7 updated. I have had some trouble with its batery life after IOS 7 update. I advised from the phone shop that I need to give it a factory restart and I made it. Now i have icloud activation lock and I have no idea when I create an icloud account. I donr remember any related email or password. I am completely losttt
Any help guys ? ( I am currently stuck with Nokia 2210Welcome to the Apple community.
Unfortunately, unless you know the Apple ID, there is absolutely nothing that can be done, you cannot use your mobile device. You may be able to find your Apple ID at Look up your old and forgotten Apple ID -
I just sold my iPhone 4s after doing a reset and deleting data and settings. Is there anyway the buyer can see any of my old photos, texts, or data? I have confidential info for work and family photos and freaked out that they can be found somehow.
No, but if the answer was yes it's a little late to start getting freaked out about it.
-
I have an iPhone 5, which I need to connect to my Bose sound wave system. What leads to I need
I have an iPhone 5, which I need to connect to my Bose sound wave system. What leads to I need for me to use my iPhone to listen to my music
Did anyone ever find an answer to Hugh's question?
I'm just now facing the how-to-connect-iPhone5 (s) to the Wave. Bose will most likely sell me an expensive connector kit, but has anyone found a way to DIY? The Bose guy did say the 5 will not work with the Bose Wave stereo I've got. -
Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.
Sorry in my MBP Snow lepard it work.. don't have Lion In MBP
-
I have an iMac for work and I am leaving the company. How do I clear the computer so that my soon to be former company is unable to see my personal information Ie. - internet, contacts, etc...
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
RESTORING: At the moment I am downloading a movie on the itunes store my 8GB ipod touch (not my computer) (which I have already paid for) and I need to restore my ipod. Will restoring it stop/delete my downloading movie? what else does it delete?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
When you restore via iTunes iTunes will download the firmware(ipsw) file. It could be that the microwave damaged the iPod and iTunes does not know what it is. -
Hello. I have an iPhone 4S. I need to get a picture sent to me a little over a month ago. It is still in iMessages in a conversation. However, as i scroll up and click on the picture, iMessages closes down on me. Is there anything I can do to get this picture?
Close out of the message app, double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for your phone to boot back up.
Then check and see if you can save the pic. -
I have uninstalled my 19.0 firefox to download the 4.0 for work and every 4.0 that I have found to download ends up downloading 19.0. I hate that I have to downgrade so much how ever I have to have the program for work. Please help. Thank You Catina with Nexgen Software Services
You can install a portable Firefox (ESR) version to access websites that do not work with the current Firefox release.
*http://portableapps.com/apps/internet/firefox_portable
*http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox,%20Portable%20Ed./
*http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox%2C%20P.E.%20Legacy/ -
Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow lepard it work just perfectly... help please.
Reinstall MacFuse with the one from http://www.tuxera.com/mac/macfuse-core-10.5-2.1.9.dmg. If that doesn't work, you can use Paragon NTFS for Mac 9.0 which has been designed to work with Lion.
-
I have the Iphone 4 will I need a travel converted to charge the phone in Spain
I have the Iphone 4 will I need a travel converted to charge the phone in Spain
The AC adaper is universal, so all you'll need is an appropriate plug converter.
Regards.
Maybe you are looking for
-
Creating a Material with different values for fields in Transaction MM01
Hello All, While creating a material i will be giving a Profit Center in Sales:general/plant view, which i can see in Costing1 View. If i change this in this View it automatically changes in the other View. Is there any way to give different values i
-
i'm in trouble with method check_changed_data. i though i was to trigger any changes in my editable alv. in pbo i've: SET HANDLER g_event_receiver->handle_data_changed FOR grid1. and in the pai: save_ok = ok_code. CLEAR ok_code. CASE save_ok.
-
RFC SAPXPG_DBDEST_ SAPDBHOST fails
Hi, In my system RFC SAPXPG_DBDEST_<SAPDBHOST> is getting failed. I have maintained all the entries correctly in sm59, still it is getting failed. When I checked dev_rd file I am getting error like "remshd: Account is disabled - see Account Administr
-
Restoring my iBook G4 from an external drive
Hi everyone, I am hoping to get some tips here. I have just got my iBook returned from AppleCare, where it had its internal HD replaced. That in itself was a story, but I will focus on the present rather than the past! The good news is that I always
-
I have created a LabView VI to take some Sound and Vibration toolkit measurements on a PXI-4461 card. I've created a .exe and a .dll out of the VI and both give me a 1940 error code (source = SVT Unit Conversion (Complex)(1 Ch).vi) the first time the