I have an iphone4s , i am unable to eject the sim card tray? please help
please help me
Use the end of a straightened paper clip. Insert into the SIM Tray hole and push very firmly and the SIM Tray will begin to come out. Once started just remove completely with your fingers.
If still problem, you can easily pull the SIM Tray out with pin tip bent into a small hook or letter L shape, carefully use tweezers or other device to bend the pin tip. Put this into the SIM Tray hole only a mm (millimeter) deep. Get the bent tip to catch and just begin to pull the SIM Tray out. Then use your fingers and pull the tray out completely.
Similar Messages
-
if you have iPhone4 and can you take out the sim card from iPhone4 and transfer it in to new iPhone4s?
Under the circumstances this will probably considered a dumb question.
I currently have a jailbroken unlocked 3GS with a GoPhone plan. Works great. I am considering upgrading to a new factory unlocked 4S. Will I be able to swap in my current SIM card and go? -
I am attempting to change the country fro US to Canada and I keep getting that the network is refused??? hence unable to redeem Canadian gift cards. Please help.
Is your iTunes account address, and other payment method(s) ((if applicable) associated with Canada? They have to be to use that Store.
-
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget. -
I purchased an iPad 3 this summer. I have looked & searched that thing and cannot find a sim card tray, where is it?? does it have one??
If your iPad does not look like this on the side, you have the Wi-Fi only iPad.
-
I have a mifi 2200. Can I use the sim card in it in my new jetpack?
I have a mifi 2200. Can I use the sim card in it in my new jetpack?
Hi Mike, congrats on the new jetpack! As evdotech mentioned, the MiFi 2200 does not use SIM cards because it is a 3G device. You would need a new SIM card for your jetpack. You can receive a software update in a VZW corporate store or by choosing Activate or Switch Device on My Verizon. This will ask for the SIM card number or ask if you need one mailed.
I hope that helps!
MarquiaF_VZW
Follow us on Twitter @VZWSupport -
I just recently downloaded the newest version of iTunes and am signed into my iTunes account, but I am unable to access the iTunes Store. I didn't get an error message with a reason why I am unable to connect, I'm just not able to connect to the iTunes Store. Please help!
https://discussions.apple.com/message/22904334
-
I am trying to update Photoshop CS6 in order to read my camera's RAW files. It is a camera that is supported by Adobe Photoshop CS6. However, when I try to get the Adobe Application Manager to update the software, it fails to do so. (The spinning wheel tells me it is checking for updates and then quits, saying that "Update Failed - Updates could not be applied. Adobe Application Manager may be damaged. Download and install a new copy of Adobe Application Manager.")
I have tried to reinstall the Adobe Application Manager 8.0, which gives me the following error message "We've encountered the following issues. Installer failed to initialize. Please download Adobe Support Advisor to detect the problem." However, when I go to the link provided to download the Adobe Support Advisor, this piece of software NO LONGER EXISTS. "
The Adobe Support Advisor has been discontinued
The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
So, I have gone to the forums and took the recommended step to update my software manually - getting the update Photoshop_CS6_13_0_6upd-2.dmg. However, this update also fails stating that my Adobe Application Manager may be damages. Download and install a new copy of Adobe Application Manager. Which puts me right back where I started.
I have also taken the step of completely reinstalling Photoshop CS6. This did not solve the problems outlined above.
Please help!reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates. -
Device: iPod Touch 4G
It tells me that and doesnt work for nothing, it's been like this for 5 days already. I cant download from the AppStore from my iPod Touch 4G either.might want to check out this post...it has some responses from apple to help verify your address
https://discussions.apple.com/message/15236858#15236858 -
My IPhone doesn't seem to have a sims card tray. Please help
My IPhone doesn't seem to have a sims card tray. I would like to change the sims card but I can not find the sims card tray. I have looked on the right side and on top of my phone but its not there. I have a Iphone4 and Verizon as my carrier. How do I change my sims? Or can I change my sims card? Please help me I would greatly apperciate it.
The Verizon iPhone 4 is a CDMA phone and as such has no SIM. Ergo there's no way to change a SIM and no way to use the phone with another carrier, if that's what you wanted to do.
Regards. -
sir have this error so what can i do The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
It looks like the iPhone is locked to a carrier that is not the one you are trying to use.
You need to determine which carrier it is locked to and then contact them to see if they are willing to authorise the unlocking of your iPhone. As ManSinha mentioned, many carriers will only authorised the unlock if requested by the customer who had the contract with them for this iPhone.
Remember that only the carrier who owns the lock on your Iphone can authorise Apple to unlock the iPhone in their servers. You need to contact the carrier or have the previous owner of the iPhone request the unlocking. -
i have the latest version of free Quicktime, Itunes and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.
Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect. -
I have a Mac Pro running OS X 10.8.2. Frequently the system fails detect a CD. Doesn't seem to make a difference if it contains music or is blank. I am unable to eject the CD. The system just doesn't recognize that a CD has been loaded.
Step one, boot the new MBA into recovery mode (CMD+R on startup), launch Disk Utility, wipe the HD, and restore the OS. On reboot, use the Setup Assistant to do the migration. Details in Pondini's Setup New Mac guide.
-
I have got an iPhone MC605J version 6.0 soft bank iphon 4 but unable to use it in India. I am trying to use Airtel sim but the phone is showing invalid sim. So please help me out to unlock it.
No one here can help you, & Apple can't/won't help you. Fact is, there is no way to get that iPhone officially unlocked. Only Softbank can authorize the official unlocking of your phone, but they won't. Softbank does not offer official unlocking for any iPhone.
It is what it is. -
I bought the iPhone4 in the apple store. Why iTunes shows that the SIM card isn't inserted when I connect to the compter? But I have inserted the SIM card.
Even if I inserted another SIM card which can work nomally in other‘s iPhone, it still doesn't work in my iPhone. So I think the problem isn't because of the SIM card.bwowWhere did you buy it? And was it connected to a carrier?
Maybe you are looking for
-
Is there a way to see and have control over who connects to your time capsule wifi network?
Ok, have this question. Have a time capsule wifi network. Have the latest mountain lion on my mac pro. I know if you go into airport utility, and you click on the picture of my timecapsule it shows what clients are connected to my time capsule aka us
-
IPod not recognised by iTunes, can't use updater.
So I downloaded the updater and tried to update my iPod Nano. Worked fine until near the end, then it got stuck on 'Do Not Disconnect'. Left it a while, eventually had to disconnect it. That lost all my music. Which I don't mind because I can just re
-
"Missing Plug ins" in InDesign CS6
Hi, lately, I've got installed CS6 Standard on a Windows XP machine, German version. There were CS2 and CS4 formerly on this workstation. The admin deleted the CS2 before installing cs6. Now, every part of CS6 is up and running - except for InDesign
-
How to define Contract for RM-CA
Hello I am working with RM-CA. I am trying to create a Contract Account in RM-CA (t-code FP06). In this t-code I am required to enter a contract as well. Where should this contract get created? SD? RM-CA? Kindly clarify. Thanks
-
Ojects from Package cannot be transported
Hello, When I try and release a transport request, I get the following message. Objects in package ZXI cannot be edited in transportable Workbench requests in the current system DXA. The transport routes are configured such that objects from package