I have an ipod 1g and it has the usb and itunes symbols but when i connect it to itunes it say unnable to connect ipod becuase you need to type in the passcode but i cant because of the symbols. Help?
So my ipod (not sure if its a 1st or 2nd g) but it has the usb and itunes symbols on the screen but when i plug it into the computer, it says, "unable to connect this ipod. type the passcode on the ipod on the ipod to connect" but i cant because of the symbols. what should i do?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
I have downloaded Games with iTunes to my PC, but I cant copy it to my iPad... It told me to authorize my computer, I have done so over and over again, but still cant copy and the message to authorize this PC keeps appearing..... Whats wrong?
This forum is for questions about Apple Remote Desktop, Apple's software for managing networked Mac systems, and hence not the best place for your question. I'd suggest asking in the iTunes for Windows forum.
Note, however, that iTunes has never been supported on the 64-bit version of Windows XP, so you're on your own to attempt to get it working.
Regards. -
So I am trying to connect my ipod to my itunes So I can transfer music from CDS I have on to my ipod...The ipod says it's connected to the computer,But itunes and my conputer do not register my ipod is connected...I have trierd to update and reintalinng it and still not working...Anyone wanna help me please
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
My mac book's finder. trash and other things don't work. how can i save all my data even though i cant transfer it all because my disk is full and isn't allowing me to delete stuff? and my midi isn't working
Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
HT3209 I have an HD laptop and itunes still says that I cannot play HD
I have bought many HD films from itunes however now it is saying that my laptop is not compatible for HD playing, my laptop is an Acer Aspire 8943G which has a 1080p screen
go to the store tap up on the top of itunes and click the store tab and on therir ther should be some thing that says aturize computer click that and it should say you have so many computers regsterd if that dos not work just talk to me hope this worked
-
i got an ipod from a friend and i tryed to start it up and it is stuck on the connect to itunes screen, it wont even pop up on itunes it says i have to put in my password to continue but i cant because it is stuck please help me!!!!!!!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
it says connect to itunes but i cant because a pop up comes up saying "Itunes could not connect to the IPod because it is locked with a passcode. then it says to enter the passcode, i cant because it says connect to itunes. Please Help
Place the iPOd in recovery mode and then restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
My iPod Touch 2nd Generation is Disabled. The mesage on my home screen says "iPod is disabled, connect to iTunes." But recently I have sold my old laptop that had all my iPod backup on it, and I have purchased a new laptop. I have iTunes downloaded onto my new laptop, and I have Authorized it with my Acount ID and Password. But, here's my problem, I have never Connected my iPod to my new laptop, and done a Sync. And when I connect my iPod to My computer with my iTunes up on my screen, My laptop trys to Sync into my iPod and a msg box appears on my screen saying that I need to Unlock my iPod before I can Sync. But I cant because of it being Disabled. CAN ANYBODY HELP ME?
Before rettoring you need to place the iPod in recover ymode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
i have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?
Does the regular Firefox 8 release version work or does the version crash as well?
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!
The power button for the Trackpad is on the right hand end of the battery case. Press that button to initiate the pairing process. On the top of the Trackpad just above the power button is a tiny green light (you probably cannot see it unless it is lighted). That light will indicate ehther or not the Trackpad is discoverable. If the Trackpad has discoverable the green light will blink on and off. If it does not pair within 3 minutes you will have to press the power button again to re-initiate the pairing process. Once your Trackpad has paired, you can just leave it on and it will pair automatically when you reboot your Mac.
If you are having problems pairing, try turning off any other Bluetooth devices within 30 or so feet of your Mac mini. That includes other Computers, iPhones, iPads, etc. that may be in the area. Once your Trackpad has pairedwith your mini, you don't have to be concerned about other Bluetooth devices.
One other hint, I find that although the Wireless Trackpad does not eat batteries as fast as the Magic Mouse it still uses more than the Wireless Keyboard. It is a good idea to keep a supply of AA batteries around. I have used Apple's Rechargable batteries, but found they did not last that long before needing to be recharged. I have had the best battery life from Duracell Quantum batteries. -
I got an ipod recently and i bought songs and apps already but i cant even get free things now without it asking for my billing details which i have already put in and i know for sure that i still have money on it
You need a valid payment method even for free items. If you know the payment method is valid then contact iTunes.
Apple - Support - iTunes - Contact Us -
my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this?
Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software. -
I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?
You would get better response from the iTunes community forum.
Have a nice day! -
I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?
As Niel has suggested Mac OS X 10.5 Lepaord.
But first of all make sure that your iBook is above 800Mhz and you have at least 512 Meg of memory. (1 GB recommended)
Please note, that if you do install Mac OS X 10.5 on your iBook, it will not allow you to install the latest version of iTunes version 11. The most recent version of iTunes that can be installed would be 10.5, which will be compatible with your iPod touch 4th gen, provided it's not been updated to iOS 6.
Sadly you can't install any version of Mac OS X above 10.5 Leopard, as it they requires an Intel processor, which your iBook G4 does not have.
Hope this helps. -
I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972
Maybe you are looking for
-
Creating a ColorModel for 4 band images.
The application I am writing involves the creation of images with over 4 bands. I'm using RasterFactory.createPixelInterleavedSampleModel(int,int,int,int) to create a SampleModel and then using PlanarImage.createColorModel(SampleModel) to create a Co
-
MP3 sound from mobile phone on Satellite
Hi, I want to connect my phone with my Satellite with the bluetooth connection and then I want to start the music on the phone and the computer has to work like a headset - the sound has to be heared on the Toshibaspeaker. Any Idea? Thank you and sor
-
Using one persona but can't see complete image of persona
using anime character persona and on that persona i can't see that anime character's image. (i can see that character's hairs only)
-
I am receiving an error and could probably figure it out if I new the lines to look for to debug. Apache Tomcat/4.0.3 - HTTP Status 500 - Internal Server Error type Exception report message Internal Server Error description The server encountered an
-
On export, embedded flv video restart issue
After exporting my project (either as SWF or MOV), when I play the exported file, the flv video I have embedded in the timeline starts over whenever a motion tween begins in a separate layer. Why might this be happening? I'm using CS6.