I have an ipod nano 4GB and use pc windows xp . since last year my ipod didnt sync any new songs saying "the ipod cannot be synced the required folder couldnt be found" and when i try to update the itunes version another error occured. plz HELP!!!!!!!!!
I have an ipod nano 4gb and use pc with windows XP. since last year my ipod suddenly didnt want to sync any new songs saying " the ipod "MOAMEN" cannot be synced. the required folder couldnt be found" and when i try to update the itunes version another error occurs and i dont know when i tryed to format ipod i didnt find "format" button. so plz give me suggestions instructions i extremely bored !!!!!!!!!!!!!1
Uninstall/Reinstall iTunes then try to rebuild the library.
http://support.apple.com/kb/HT1925 (uninstall/reninstall)
http://support.apple.com/kb/HT1451 (recreate library)
Similar Messages
-
I can't sync any new songs to my iPod, when i plug it in my computer I don't see the iPod icon on iTunes, please help.
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X -
For over a week,I get the following message everytime I have tried to connect to ITunes Radio..."An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later." My internet connection is excellent & strong & "LATER " has been over a week. Any help or suggestions?? It would be much appreciated, thanks
Somebody suggested clearing the Store cache. I don't know why that would affect the radio. Seems to have not worked for some, worked for a few or maybe they imagined it. Many other posts about this if you browse the forum.
This is happening to some people some of the time in some places, but then not affecting people in other places, or in the same place at different times. You try to guess what is going on. Hasn't happened to me. Maybe it's my iTunes 7.5, or maybe it's luck of the draw since I never use iTunes radio.
Complain to Apple:
http://www.apple.com/feedback/itunesapp.html
Oh, don't expect Apple to say anything about this -- that's not their style. -
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
How do I find all the purchased items on my iPhone? When I try to update the iPhone iOS while connected to my MacBook it says there are purchased items on the phone that have not been transferred to my iTunes library and that I should transfer them before updating.
Thanks. This seems to have worked easily.
-
I'm running iTunes 11.0.5.6 on Windows 8. When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed." What do I need to do?
Perhaps this can be of help:
http://support.apple.com/kb/TS3704
It fixed the problem for this DukeHutchens in this thread:
https://discussions.apple.com/thread/3916663?start=0&tstart=0 -
when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.
Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick -
When I try to update the Star Walk app I get a message requiring acceptance of new terms and conditions. It never stops. I accept even email myself a copy but I keep getting the same message. How do I get past the message?
The issue should be fixed now. Sorry about that, another Apple snafu but at least a short one.
-
When I try to update my iTunes, it tells me that I have the latest version, but I only have 10.6.3 - how can I override this?
I'm sorry but your post seems vague as to exactly what version of what you are running, therefore, it comes as a surprise that you mention that "it" won't let you update iTunes. Did you run Software Update or try updating from within iTunes?
If you are running a Mac under Mac OS X 10.6.3, then if you should be able to update that by using System Update to version 10.6.8 - first and foremost.
Then, assuming you can run Mac OS X 10.6.8; I would think that you can (secondarily) update iTunes to Version 10.7 or Ver. 11.0.5.; IMHO 10.7 is better as it has Coverflow. Nonetheless...
Regards -
When I try to update the software, I get the error message.
I cannot find the installation package, I've searched the entire computer!
I've tried to uninstall iTunes, but it won't let me, and I can't delete any of the folders from the program files :/
PLEASE HELP.Hi scander1,
Are you receiving an error when trying to sign off? What exactly are you seeing/what happens when you attempt to sign off?
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution -
what does it mean when you try to upload the version of itunes and it tells you the C runtime library was loaded incorrectly?, what does it mean when you try to upload the version of itunes and it tells you the C runtime library was loaded incorrectly?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?
The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them. -
I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?
thank you very much!
everything's allright
bye -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
My iTunes password will update some of my Apps but not all of them. When I try to update the remaining ones, my password expires. I've just created 5th PW. Does anyone else experience this?
- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
Maybe you are looking for
-
"resetting" a skin in ActionScript at runtime?
Is there a way to "impose" a skin at runtime via a function? I'd like to be able to "reset" my components back to their originally-skinned status when clicking a particular button. Thanks.
-
Why do I lose my hyperlinks when combining pdfs?
Hello, I have a report that was converted from Word into a pdf. It has hyperlinks to other pdf files (appendices) that are in the same folder on my computer. The hyperlinks in both the Word version and pdf version of the report work. Until I combine
-
Error while executing FILE to CRM scenario
Hi I am working on xml file to crm scenario. When I am execting the scenrio I can see success message in XI system but in CRM system SXMB_MONI I found the following error DYNAMIC_CALL_ILLEGAL_METHOD Unable to call the application dynamically. Method
-
How To Apply Row level security ??
Hi all, I want to apply row level security on one of my custom objects created in PO schema in R12. How to do that?? Thanks and Regards Raj
-
Export ISO info with multi track audio
Hi, Need help with the exporting of multi channel file. I have one video track & 32 audio tracks. Apart from the original rest are translation tracks so I want to find a way to be able to add ISO information for each track so that information is save