I have an iPod that was set up and synced on another computer, I have a new mac now and I can't get the songs off the old iPod
well the short of it is I set up my pod on the wifes computer
Ive got over 4500 songs on it and want to transfer them to a new mac I just got
its not allowing me to do so, what can I do????
I dont haveaccess to the other computer anymore
You did not restore the new iPhone.
The first time a new iPhone is connected to iTunes on a computer that is used to sync with another iPhone or iOS device or that was used to backup another iPhone or iOS devide, you are prompted to transfer the backup for the other iPhone or iOS device, or set up the new iPhone as a new iPhone.
Since the old iPhone was synced with iTunes on a different computer, all iTunes content on the new iPhone (which is none at the present time) will be erased first.
The warning message should indicate all iTunes content will be erased from the iPhone, which is iTunes content only.
If you are syncing contacts with a supported address book app on this computer and the supported address book app on this computer includes any contacts, you will be provided a merge prompt for the contacts, which you want to select. Otherwise the contacts on the iPhone will be replaced with the contacts in the address book app on the computer with the first sync.
Similar Messages
-
i have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your Mac and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once you have successfully done that you can go ahead and choose Erase and Sync when you plug your iPod in.
B-rock -
My first laptop died. I have a new laptop now. How can I get my Ipod song list on the new laptop without downloading each c.d.?
See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
My old Mac died. I had it backed up to a Time Machine external drive (fortunately). I have a new Mac. I want to get my entire iTunes library from the Time Machine drive to the new Mac. I want not only the music files but all the "library" metadata, playlists, song rankings, unique genre designations. How do I do this?
No backup is a huge mistake.
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Apple - Support -
Can't get some songs off my ipod!!
For some reason I can't get some songs off my old ipod. recently I lost all my songs on my new ipod so I went to my old ipod followed the steps of extracting files from ipod to itunes and come to find out that some songs didn't go into itunes. The files I want were downloaded using imesh and they are mp3 format. For some reason when I go into my computer and open my ipod's music folder the songs are not there yet they have to be because I can see and play them on itunes when I connect the old ipod.But I can see one of the files in a folder except that one file is really the entire album. It's about 13 songs and I can't seem to seperate them. So is there anyway to directly transfer all files from the ipod to itunes instead of doing the copy folder steps as described in apple's "transferring music guide"? Also I tried consilidating library and that didn't work either.
There is a manual method of accessing the iPod's hard drive and copying songs but not playlists back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
iGadget Windows Only -
I have deleted iPhoto that came with my new mac air 2013, how can i get it back again?
I have deleted Iphoto that came with my new Mac Air 2013, how can I get that back... Well, I know, I should have done it, but I've not set up the time machine yet... Many thanks
Okay, look under Purchases:
-
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?
I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?
-
I just downloaded iCloud on my PC and noticed that fewer than half of my photo stream photos have transferred over to my PC. Why is this happening and how can I get the remaining photos? All of my devices are charged and have perfect internet signals. Thanks in advance for any tips and insights!
It's probably happing because photo stream photos only remain in iCloud for 30 days (even though your last 1000 photos will remain on your devices until deleted). When you enabled photo stream on your PC you would have only received photos from the last 30 days.
To transfer older photos to your computer, create a shared photo stream that contains them and invite yourself as a subscriber (see http://help.apple.com/icloud/#mmc0cd7e99). -
I have a lap top that is not very fast now and quite useless but has over 11000 songs on my I tunes account.now I have a new I pad.how do I put all the old music from the laptop onto my iPad?
Follow the instructions here or here.
(82114) -
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem... -
I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?
Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.) -
'Remote' app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required.
OK, I understand that new versions make use of facilities that come with new versions of IOS, but there is/was a version that runs on 3.1.3 and therefore, I assume 4.2.1. Where can I get the (old) version that runs on my IOS?
The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach. This is my first venture into smart phones, and I like the IOS interface, but I'm not sure I can afford the maintenance.The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach.
This is standard for Apple. While there is little official mention of the software support lifespan for equipment, typical support has been about 4-5 years for computers. It strikes me that newer items, especially mobile devices, are not built as sturdily nor do they have the hardware upgrade capabilities required to keep up with newer systems. When we bought an iPhone 4S we were told by the person in the store we'd probably be looking at a newer model in two years. The iPhone 3G could be anywhere from 2 to 4 years old, putting it well into.
As for app availability, Apple typically pulls old software versions from its site when new versions appear. If it is a non-Apple app then I guess it is up to the vendor. It is indeed tiresome but it is not at all unusual. Since I only ever run used Macs, I download current versions even though my computer won't run them, stick them on a hard drive, then I have them when I upgrade to a newer used computer. If you run older equipment you have to learn a different mode of operation to exist with the Apple 'new and innovative' but 'forget about the old' philosophy. -
I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?
Welcome to the Apple Community.
Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions) -
I have an Iphone 4 and I can't get the bluetooth to work in my 2009 Nissan 370z. Any suggestions? Thank you
Was your airport express purchased recently?
Was it new or used?
Has it been set to extend an existing network?
You can always try resetting the airport express by unplugging it and pressing the little button on the underside with a stretched out paperclip for roughly 30-45 seconds then try plugging it in again.
Once you've reset the airport express, you'll want to walk through the setup process from a Mac or Windows computer using Apple's Airport Setup Utility.
For OS X
http://support.apple.com/downloads/AirPort_Utility_5_4_1
For Windows
http://support.apple.com/kb/DL840
Maybe you are looking for
-
ERROR:can't find native registration class while J2EE Engine startup
Hi Iam trying to integrate a Java Profiler application which contains a native library(namely ProfilerDLL.dll) with the J2EE Server.Here are the steps which i had followed 1. Added the following Java option through the config tool of WebAS.<b> -XrunP
-
Can't drag desktop icons & other problems
Hi.. I cannot drag my desktop icons nor items from a folder to DT. When this happened, I lost printing from my Lexmark E120N, my memory chips were listed as 68k and 28 k when they are 1 gig & 2 gig. That seems to have cleared up. I also cannot copy a
-
what is the significance of initial field and valid field in data type like float,numeric,int etc.
-
I am going to upgrade to one of the new 27 inch iMacs. I use CS4 Premium Design Suite, PS, IL, ID and a little bit of DW. Does anyone have a comment or thought on any real benefit to a Quad Core processor? Do any of these apps support the multi thr
-
Along with many others I am getting sick of upgrades being pushed at us continously. Just as you find all your data and the changes in layout, proceedure and process that have been made, along comes another system upgrade that means that previously a