I have an ipod touch 4g(ios 6.0.1). when i updated it, it became very slow so i want to downgrage it to ios 5.1. i feel it was better at that time. so, i want to downgrade it to ios 5.1. please help me.
i have an ipod touch 4g(ios 6.0.1).when i updated it, it became very slow so i want to downgrage it to ios 5.1. i feel it was better at that time. so, i want to downgrade it to ios 5.1. please help me.
Downgrading iOS levels is not supported by Apple.
iOS 6 levels should run fine on your iPod Touch 4g but you should first update to iOS 6.1.2 which is the latest to see if that helps your problem.
Similar Messages
-
Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?
You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
http://support.apple.com/kb/HT2052 -
i have an ipod touch and lyrics dont show up when i play a song. i know how to insert lyrics they just dont show up. what can i do?
Are you trimming the videos on the iPod?
http://blogs.vancouversun.com/2010/09/20/how-to-fix-out-of-sync-audio-on-videos- taken-with-your-iphone-or-ipod-touch-4g/
Also see:
https://discussions.apple.com/message/12873340#12873340 -
I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?
This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i have an ipod touch 3rd gen , it is currently running ios 4.2 and i am trying to upgrade to a newer version, when i do a software update it doesnt show me any updates???
You appear to have a second generation iPod touch, which can't be updated past 4.2.1.
(100087) -
I have an iPod touch model MB528C and I can't get it to update. It has version 4.2.1 on it now, is this the most recent update it will accept.
collette turner wrote:
I can't believe Apple won't update my "old" iPod touch...and I can't use most of the apps offered either!!
Ya know, I don't know about the rest of the Apple users of the world, but I am sick to death of Apple and their ********! You spend a lot of money and before you know it, your device is "antiquated"....NEVER,NEVER, NEVER WILL I HAVE AN APPLE PRODUCT AGAIN. APPLE JUST PLAIN STINKS!!!...Not to mention they are getting rich all the sweat of third world countries. Anlyone with a social conscience should boycott Apple!
Really?
How is it different than all other software driven devices/tvs/cars/computers/dvd players/etc
This is completely normal. -
I have an ipod touch i.o.s 4 how do i update it
I have an Ipod touch i.o.s 4.3.5 how do i update it
Connect to computer and update via iTunes
iOS 4: Updating your device to iOS 5 or later
If no cameras then you have a 3G iPod that will go to 5.1.1. Yo need iTunes 10.5 or later on the computer
If cameras you have a 4G that will go to 6.1.6. Yo need iTunes 10.7 or later on the computer -
My digitizer is not responding however i have loads of iMessages which i can see because the lcd screen is visible but touchscreen is brokenI tried to go onto my ipod touch to look at them but when i looked it had not been signed in to iMessage which was after i received the iMessage on my iPhone . Is there a way i can get imessages sent to iPhone which i currently cannot access due to the touchscreen being unresponsive to load on my iPod iMessage which is connected to my phone number as well as my email?
maggielou wrote:
I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed. However, a few of the recent pictures have shown up on my phone.
IHow could I get these from my MacBook to my phone?
Thanks again.
When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups. You can't view the backups.
Look at the two links I provided.
You still didn't answer any of my two questions I asked. -
I have an iPod touch that does not seem to be working properly I have deleted history cache cookies I gave 22.1 available I get booted off sites for no reason do I need an antivirus if so where can I find a good free one
There are no antivirus apps for any iDevice
- Try the standard fixes:
- Reset. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod. -
Hi! Today I tried to update my ipod touch 4th generation to ios 6.0.1. But the final result was my ipod being reset to factory settings. I don't know what happened. Does it mean I lost everything on my ipod? How do I get everything back? I had backed up my ipod on my computer before updating. Will that help? I don't know what to do now. I'm not very good with anything electronic, so now I'm afraid to touch anything in case I make it worse...
The backup that iTunes makes does not include synced media like apps and music. Se the following for what it does contain.
iTunes: About iOS backups
http://support.apple.com/kb/HT4946You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My ipod touch screen is frozen. Screen reads " ipod in disabled. Connect to itunes"We have powered down several times. When I hook to itunes I get message that it wont open without passcode being intered on ipod touch. I can't enter anything on touch. Any solutions?
Place the iPod in Recovery Mode and restore via iTunes.
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I purchased the most rent iOS download from iTunes to update my 1st gen iPod touch and after it was done downloading it started to restore my iPod with the update and now my iPod wont update and it keeps showing error 1604 and won't come out of recovery mode how do I fix it so I can update my iPod touch with this software. Thank you
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694#error1604 -
please help
I can't open my safari or youtube on my iphone
I just want to restor it but I can't
I do all what they ask me to do when I tray to restore
Please helphttp://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue. -
can anyone help
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For Messages problem:
iOS: Troubleshooting Messages -
I have an iPod touch the screen suddenly went white, when pulling it out of a pocket.
when it starts up it has a black bar down the left side but then goes all white. I have synced with itunes and restored to factory settings but no change. Does that mean the lcd screen is gone out?
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar
Maybe you are looking for
-
We have a probelm with TAPA/TAN orders confirming the product. The TAPA line may "confirm " the entire amount requested , but the TAN line only confirms what is available even with the complete button checked on the order, therefore, if the sales per
-
How to master data conversion in ABAP/4 programming
I only know there is no special syntax to data conversion and put an "=" between destination data object and source object. But I don't know whether the conversion is legal or not. Who can help me?
-
Editing text in the blank composite target box?
I am having a very hard time editing text inside the composite target box. Sometimes it moves outside the target box and operates as a static text box. The target box itself shows/hides correctly though the text is not part of it. I am unable to use
-
ABAP - Case Management - Change Attribute on unsaved case
Hi - how can I populate/change attributes of a case befre it is saved - I have the GUID and can get attributes by calling BAPI_CASE_GETATTRIBUTES, however if I try to set them using BAPI_CASE_CHANGE or BAPI_CASE_CHANGEATTRIBUTES it falls over when th
-
I have 2 tables emp_master (emp_id, emp_name) dept_master (dept_id, dept_name, emp_id (references emp_id in emp_master)Now there are 30 departments and each department can have maximum 5 employees. Now I want a query that would list a department and