I have an mp3 player and want to use itunes

I have a scan disc mp3 player and would like to transfer music from itunes to put in it. thanks greg

iTunes only supports iPods, iPads and iPhones.

Similar Messages

I have my iTunes Library on and external hard drive. I have a new computer and want to use iTunes and KEEP my files on the external drive.

My iTunes library is on an external hard drive, and I was able to access / add to the library from my windows laptop.
I now have a new laptop, and want to be able to KEEP the library on the external drive while being able to use iTunes from the new laptop.
I have selected "choose library" in iTunes, and have chosen the iTunes Library.itl file on the external drive.
My media populates in iTunes on the new laptop version of iTunes, but when I click on a song iTunes says that it cannot locate the song.
Your help is kindly appreciated!

Thanks. Were the settings shown in your last screenshot in force when you added the song that's shown on being on the C: drive? It is also possible that at some point you ran iTunes with the external drive disconnected, in which case it will have defaulted to the library on the C: drive, or that you've run iTunes without explicitly selecting the library on the E: drive. To make sure the latter is the case, hold down SHIFT while starting iTunes, then when you get this prompt:
click on Choose Library..., navigate to the location of your current iTunes Library.itl file, and click Open.
Part of your issue may that its not obvious where that current database file is located. The folder layout on your E: drive isn't the one that's most easily managed - so its possible that the database file could be in:
E:\xxxx\Files\iTunes
E:\xxxx\Files\iTunes\iTunes
E:\xxxx\Files\iTunes\iTunes 1
I suggest that a lot of your issues can be addressed by reshaping your library into the reliable "portable" layout as described in tt2's Make a split library portable user tip. Comparing your screenshot with the equivalent on my system (where I have a "well-formed" library on an external drive):
where:
there is just one iTunes folder with everything used by iTunes inside it
all media is held within subfolders of the iTunes Media folder
The way you have yours set up, where the iTunes Media Folder location is set to E:\xxxx\Files\iTunes rather than E:\xxxx\Files\iTunes\iTunes Media is probably why some of your media is not being located correctly - the extent to which iTunes can correctly resolve locations is, to an extent, reliant on the folders for the different media kinds (Music, Audiobooks, etc.) being inside the iTunes Media media folder. One common misunderstanding (not helped at all by Apple's documentation!) is that the iTunes Media Folder location setting in Edit > Preferences > Advanced does not tell iTunes where to find anything; rather it determines where iTunes will put new additions to your Library, in conjunction with the Copy files to iTunes Media folder ... flag:
I would definitely take the time to work through the steps to bring your library into the "portable" shape - there may be few remaining issues with broken links when that's complete but this will be much easier to fix if your library is in a more standard structure.

I have 2 iphones in the family and want to use itunes match on both devices, but my husband has his own itunes acct, how can he use the main itunes library and get out music on his phone also

I have 2 iphones in the family and want to use itunes match on both devices, unfortunately my husband has his own itunes acct and when i change on his phone to my itunes acct it states that the email is already in use, any help on how to get the itunes match to go onto both devices, thanks

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting. Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
Regards.

I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one. Are there any aftermarket devices for USB to phone that would work in this case?

I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

I have an old MACBook and want to use it as an external drive to load disks on to my new mac. How do I?

I have an old MACBook and want to use it as an external drive to load disks on to my new mac. How do I?

Apple makes a Thunderbolt to Firewire adaptor if your new computer does not have a Firewire port.

I had iMessage with a UK number and I have moved to Australia and want to use an Australian number, how can I change it over?

I had iMessage with a UK number and I have moved to Australia and want to use an Australian number, how can I change it over?

something here may help
http://support.apple.com/kb/TS4268

Hi there Hope someone can help me here. I am currently on holidays and my Kids have disabled my iPad so I now have to sync with my computer. I don't have my computer handy and want to use my device over the next few weeks if possible so can anyone help me

Hi there
Hope someone can help me here. I am currently on holidays and my
Kids have disabled my iPad so I now have to sync with my computer.
I don't have my computer handy and want to use my device over the next few weeks
if possible so can anyone help me please
Thanks
Darren
iPad 2 Wi-Fi + 3G, iOS 6.0.2

You need a computer.
Suggest you goto the nearest Apple Reseller and ask them to help you.

I have old photoshop 6 and want to use Warp...can I do that?

I have old photoshop 6 and want to use Warp...can I do that?

If I understand correctly holders of licenses of older versions than CS2 are entitled to install and use Photoshop CS2.
Maybe you could read up on that and, in case you want to pursue that option, make sure your OS and Photoshop CS2 »play nice«.
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

If you didn't have an MP3 player, and the Xtra and the Micro cost the same. what would you g

Lets say the Xtra and the micro cost the same price. You don't have an Mp3 player yet. You still have the knowledge that you have now for both products.
Which mp3 player would you pick and why?

right now i own the micro. If i had the chance to pick again with the knowledge i have now, I would go with the Xtra.
Because before i didn't know anything about bit rate...... I thought the micro could hold up to 2500songs.
I learned that it will only hold about ,030 songs wma 60kb
ps.
NOT COOL.

I have lost my phone and want to use the find my iphone app to delete all the info on my phone. How can i do this on another persons iphone? do i need to log out of their icloud account and then sign in under mine?

I have lost my iphone 4s and want to use find my iphone app on my boyfriends iphone 3s to delete the info on my now lost phone. Do i need to log out of his icloud inorder to log into mine to do this on his phone?

You need to use the Find My iPhone app (in the itunes store - free). When invoking it on a device, you enter the ID password of the account the lost device is connected to. You can also use a computer's browser and log into icloud.com.

I have an iPad 2 and want to use video mirroring. I bought a VGA adapter for the iPad, iPhone and iPod so that I could plug the iPad into any monitor, TV, projecter, etc without it being an HD device. I plug it in and it appears the monitor has no communi

I have an iPad 2 that I want to use with video mirroring to give lectures with. I bought a VGA Adapter for the iPad, iPhone, and iPod as I want to be able to connect with any TV, monitor or projector for lectures, not just an HD device.. After plugging in my iPad to the VGA adapter and then to the video device, it appears that there is no connection with the iPad. Anybody have any thoughts?
Thanks, Steve

This article outlines how to use the Apple AV adapter or VGA Adapter to connect your iPhone 4, iPhone 4S, iPad, or iPod touch (4th generation) to an external TV, projector, or display. http://support.apple.com/kb/HT4108
This explains how to set up AirPlay Mirroring, and how to troubleshoot AirPlay Mirroring issues that may occur between your iPhone, iPad and Apple TV (2nd generation). http://support.apple.com/kb/TS4085

I have a new iPod and want to use it with my iTunes Library

I have a 60 gb and it is full. I want to keep this iPod and use my new Classic iPod 5th for Audiobooks. How can I had do this and not loose my music, movies, and audiobooks?

You will not lose anything. The new iPod will be recognized as a separate device. It can be configured completely differently than your existing one.

I have an mp3 sound I want to use as my ring tone. How do I add it?

How do I add a ringtone? I have a small mp3 I want to use.

Apple makes a Thunderbolt to Firewire adaptor if your new computer does not have a Firewire port.

I have a list a and want to use (CSR) Jslink to change the view but multiple fields

I have a list but want to use CSR - jslink to change the view of multiple fields. Can a jslink have multiple fields to change. Looking at the samples
here
Would like to merge 2 or 3 script in one to do multiple things. Is this a best practice?
Thanks in Advance
Code snippet here below(tried this but not working for me.Sure im missing something): Trying to combine the prioritycolor and percentagecomplete together but not working
// Create object that have the context information about the field that we want to change it's output render
var fieldsContext= {};
fieldsContext.Templates = {};
fieldsContext.Templates.Fields = {
// Apply the new rendering for Priority field on List View
"Priority": { "View": priorityFiledTemplate },
"PercentComplete": {
"View": percentCompleteViewFiledTemplate,
"DisplayForm": percentCompleteViewFiledTemplate,
"NewForm": percentCompleteEditFiledTemplate,
"EditForm": percentCompleteEditFiledTemplate
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(fieldsContext);
// This function provides the rendering logic for list view
function priorityFiledTemplate(ctx) {
var priority = ctx.CurrentItem[ctx.CurrentFieldSchema.Name];
// Return html element with appropriate color based on priority value
switch (priority) {
case "(1) High":
return "<span style='color :#f00'>" + priority + "</span>";
break;
case "(2) Normal":
return "<span style='color :#ff6a00'>" + priority + "</span>";
break;
case "(3) Low":
return "<span style='color :#cab023'>" + priority + "</span>";
// This function provides the rendering logic for View and Display form
function percentCompleteViewFiledTemplate(ctx) {
var percentComplete = ctx.CurrentItem[ctx.CurrentFieldSchema.Name];
return "<div style='background-color: #e5e5e5; width: 100px; display:inline-block;'> \
<div style='width: " + percentComplete.replace(/\s+/g, '') + "; background-color: #0094ff;'> \
 </div></div> " + percentComplete;
// This function provides the rendering logic for New and Edit forms
function percentCompleteEditFiledTemplate(ctx) {
var formCtx = SPClientTemplates.Utility.GetFormContextForCurrentField(ctx);
// Register a callback just before submit.
formCtx.registerGetValueCallback(formCtx.fieldName, function () {
return document.getElementById('inpPercentComplete').value;
return "<input type='range' id='inpPercentComplete' name='inpPercentComplete' min='0' max='100' \
oninput='outPercentComplete.value=inpPercentComplete.value' value='" + formCtx.fieldValue + "' /> \
<output name='outPercentComplete' for='inpPercentComplete' >" + formCtx.fieldValue + "</output>%";

Hi Patrick,
It works in my test environment using your code.
I suggest follow the steps as below:
1. Save the following code as a js file (TaskListView.js) and upload it into the SiteAssets Document Library.
2. Edit the list view page.
3. Edit the list web part. Go to Miscellaneous -> JS Link.
4. Add the following URL into the JS Link textbox.
~site/SiteAssets/TaskListView.js
5. Click "OK" and save the page.
If it still not works, please check whether active the Minimal Download Strategy feature in site feature or not.
Best Regards
Dennis Guo
TechNet Community Support

I have an mp3 player and want to use itunes

Similar Messages

Maybe you are looking for