I have an MS word doc saved from a Macbook in my flash drive. Now i want to print this from an IBM compatible laptop. problem is -- I can't access the file. Please help.

I have an MS word doc saved from a Macbook Pro on m flash drive. Now i want to print
th same doc from an IBM Compatible laptop. Problem is, I can't access the file. Please help.

I suggest you post your question on Microsofts own forums for their Mac products as it's their software you're having issues with:
http://answers.microsoft.com/en-us/mac

Similar Messages

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
It constantly gets harder.

I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-

I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-

Ernest,
This is how I do it: With all the video & still's in the time line, I click on each (even if I have to use the command key and click on each file). When each file is active I go under SHARE- go to EXPORT MEDIA- I use the Apple Pro Res codec 4:2:2. If you do not click on each file in the time line it will not be exported out.
Hope this helps.

HT204057 I have the latest airport extreme. can not access the files.

I have previously time machine backups for two macbook pros on same drive.
However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
What am I doing wrong?

You can't access a Time Machine backup that way. Connect the drive directly, hold down the option key, and select Browse Other Backup Disks from the Time Machine menu.

HT1918 How do I reset my account I have 0.91 $ I can not change the Store please help

How do I reset my account I have 0.91 $
I can not change the Store please help
plz help

Change your password
iTunes Store: Retrieving and changing passwords (Apple ID)
Alert itunes support
https://www.apple.com/support/contact/

Hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!

hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!

I had the same problem but looking at what everyone else said, I simpley slowly started to click on all the tabs in the app store, let them load completely, and then clicked back to the updates afterwards. It worked after a little while

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a s

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a stalled/locked program. I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed. Do you have anyone who could walk me through each step to correct this problem which just started two days ago. I have owned this program for at least a year now...

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How can we access the file/directory system in the server

Hi friends,
I have made a text editor attached with an audio player for my project.
Both text editor and audio player are implemented in applet and put in to a
jsp page using jsp:plugin. Text editor and player are separate applets running
in the same page and from same server.A client who is using this editor may
want to save the edited text files to the server as well as hear audio files from
directories in the server.
My question is how can we access the file/directory system in the server
like we do in the local machine.When the user cliks save or openfromserver button
in the editor, folder/files in the server must be displayed as we do with FileChooser.
I am using Apache Tomcat 5,wiindows 2000 server, jdk1.5.
manu

You can't access it directly. But your applet can make net connections to the server, and the server can provide that kind of functionality. Generally this is easiest by making HTTP connections and having the server provide the functionality via the web server. (So in your case, JSPs or servlets on the server would list/deliver/create/modify/delete files, and the applets would invoke those JSPs and servlets.

HT1145 I can't see my files on my USB shared drive. It shows there is lots of space taken up, but I can't access the files via my Mac.

I can't see my files on my USB shared drive. It shows there is lots of space taken up, but I can't access the files via my Mac. How do I see them? I also can't see them on my iPad using FileBrowser.

You don't have access to it to configure it via Time Machine? You lost me on that one, Time Machine is used for Backup.
Here is a basic article on the first setup and what you should see:
http://support.apple.com/kb/HT1178
To configure Time Capsule you should be using "Airport Utility" 5.3 or higher that is located in the Utilities folder. You can tell if its version 5.3 because the icon will have blue lines instead of orange lines like the older versions. Since you are running Leopard 10.5.6 and you ran Software Update you are probably already running the latest 5.3 version.
The light flashing amber means you haven't entered enough information so that it can get to the internet. Once you have that info entered the light will turn green.
If your absolutely sure your CAT5 cables are good you can try a hard reset. I think you have to push the reset button on the back and hold it for 5 seconds or so until the amber light blinks rapidly, then when you release the button it does the reset then.
http://support.apple.com/kb/HT1300?locale=en_US
Hope this helps! If not I would probably call AppleCare support or see if you can exchange it.
-Dan

Apple TV2 can see my laptop but it can't access the files in on my laptop. Home sharing is turned on. I'm using Windows7 64bit. ATV2 can access the files on my other laptop and PC. I've updated my iTunes and ATV2. Any suggestions?

Apple TV2 can see my laptop but it can't access the files on the laptop. ATV2 can access the files on my other laptop and PC.
My PC can see the laptop in question but it can't access the files.
I've updated iTunes to and ATV2 to the lastest version. My laptop is running Windows7 64bit.
Any suggestions?

Welcome to the Apple Community.
I assume you taken the step of restarting the laptop.
Have you checked your security software is allowing access for iTunes, which security software are you using.

Newby question: I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site...

Hi,
I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site.
I am using a trial right now, so I am not sure if I have all the necessary licences, but I am really new to this subject so a link to msdn page or blog item might already do the trick.
This is what I have right now:
https://www.youtube.com/watch?v=rV2_m4iWxSE
Thanks

No that is not currently available.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access it. Please help.

Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access the store. Please help.

If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK.

Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help

Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

HT3209 i want to get old purchased songs and albums back onto my ipod. havent been connected in very long time. now old purchases have this cloud thing on them and i dont know how to access them. someone please help!

i want to get old purchased songs and albums back onto my ipod. havent been connected in a couple years. old purchases have a cloud on them and wont let me access them. someone please help!

I have tried that as well. The purchased songs are not in my playlists and they are still there. I manually deleted them on the phone but the sync puts them right back on there.
I only sync playlists and they aren't on there.

I have enabled cookies, but I still can't access the website. HELP!

I have enabled cookies, but I still can't access the website. I keep getting a pop up asking me to enable cookies. How do I fix this?? See screenshots. HELP!!!

See also:
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled
Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?
You can also check if DOM Storage is enabled.
*http://kb.mozillazine.org/dom.storage.enabled
You can check to make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history).
*https://support.mozilla.org/kb/Private+Browsing
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
You can also try to crop images and only keep the relevant part(s) and possibly save them with a higher compression value.

I have an MS word doc saved from a Macbook in my flash drive. Now i want to print this from an IBM compatible laptop. problem is -- I can't access the file. Please help.

Similar Messages

Maybe you are looking for