I have an Nvidia GTX 560, yet 310.19 wont work

Irritated and baffled by this. This page clearly states that my GTX 560 is supported by 310.19 (as it should...this card isn't that old), yet after installing the new driver and rebooting, Xorg fails to start, and error logs say that the Nvidia kernel module couldn't be initialized.
Xorg log
[ 10.593]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10.616] X Protocol Version 11, Revision 0
[ 10.616] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 10.616] Current Operating System: Linux ZeroArch 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64
[ 10.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
[ 10.616] Build Date: 08 November 2012 07:09:29PM
[ 10.616]
[ 10.617] Current version of pixman: 0.28.0
[ 10.617] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.617] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.617] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 20 22:14:39 2012
[ 10.717] (==) Using config file: "/etc/X11/xorg.conf"
[ 10.717] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.742] (==) ServerLayout "Layout0"
[ 10.742] (**) |-->Screen "Screen0" (0)
[ 10.742] (**) | |-->Monitor "Monitor0"
[ 10.742] (**) | |-->Device "Device0"
[ 10.742] (**) |-->Input Device "Keyboard0"
[ 10.742] (**) |-->Input Device "Mouse0"
[ 10.743] (**) Option "Xinerama" "0"
[ 10.743] (==) Automatically adding devices
[ 10.743] (==) Automatically enabling devices
[ 10.743] (==) Automatically adding GPU devices
[ 10.827] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.827] Entry deleted from font path.
[ 10.827] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.828] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.828] Entry deleted from font path.
[ 10.828] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.828] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 10.828] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.828] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 10.828] (WW) Disabling Keyboard0
[ 10.828] (WW) Disabling Mouse0
[ 10.828] (II) Loader magic: 0x7fcc40
[ 10.828] (II) Module ABI versions:
[ 10.828] X.Org ANSI C Emulation: 0.4
[ 10.828] X.Org Video Driver: 13.1
[ 10.828] X.Org XInput driver : 18.0
[ 10.828] X.Org Server Extension : 7.0
[ 10.831] (--) PCI:*(0:1:0:0) 10de:1201:3842:1461 rev 161, Mem @ 0xfc000000/33554432, 0xd0000000/134217728, 0xd8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 10.831] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.849] Initializing built-in extension Generic Event Extension
[ 10.849] Initializing built-in extension SHAPE
[ 10.849] Initializing built-in extension MIT-SHM
[ 10.849] Initializing built-in extension XInputExtension
[ 10.849] Initializing built-in extension XTEST
[ 10.849] Initializing built-in extension BIG-REQUESTS
[ 10.849] Initializing built-in extension SYNC
[ 10.849] Initializing built-in extension XKEYBOARD
[ 10.849] Initializing built-in extension XC-MISC
[ 10.849] Initializing built-in extension SECURITY
[ 10.849] Initializing built-in extension XINERAMA
[ 10.849] Initializing built-in extension XFIXES
[ 10.849] Initializing built-in extension RENDER
[ 10.849] Initializing built-in extension RANDR
[ 10.849] Initializing built-in extension COMPOSITE
[ 10.849] Initializing built-in extension DAMAGE
[ 10.849] Initializing built-in extension MIT-SCREEN-SAVER
[ 10.849] Initializing built-in extension DOUBLE-BUFFER
[ 10.849] Initializing built-in extension RECORD
[ 10.849] Initializing built-in extension DPMS
[ 10.849] Initializing built-in extension X-Resource
[ 10.849] Initializing built-in extension XVideo
[ 10.849] Initializing built-in extension XVideo-MotionCompensation
[ 10.849] Initializing built-in extension XFree86-VidModeExtension
[ 10.849] Initializing built-in extension XFree86-DGA
[ 10.849] Initializing built-in extension XFree86-DRI
[ 10.849] Initializing built-in extension DRI2
[ 10.849] (II) LoadModule: "glx"
[ 10.899] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.088] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.088] compiled for 4.0.2, module version = 1.0.0
[ 13.088] Module class: X.Org Server Extension
[ 13.088] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
[ 13.088] Loading extension GLX
[ 13.088] (II) LoadModule: "nvidia"
[ 13.110] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.425] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.425] compiled for 4.0.2, module version = 1.0.0
[ 13.425] Module class: X.Org Video Driver
[ 13.511] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
[ 13.511] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.541] (++) using VT number 7
[ 13.563] (II) Loading sub module "wfb"
[ 13.563] (II) LoadModule: "wfb"
[ 13.564] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.626] (II) Module wfb: vendor="X.Org Foundation"
[ 13.626] compiled for 1.13.0, module version = 1.0.0
[ 13.626] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.626] (II) Loading sub module "ramdac"
[ 13.626] (II) LoadModule: "ramdac"
[ 13.626] (II) Module "ramdac" already built-in
[ 13.651] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.651] (==) NVIDIA(0): RGB weight 888
[ 13.651] (==) NVIDIA(0): Default visual is TrueColor
[ 13.651] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.651] (**) NVIDIA(0): Option "Stereo" "0"
[ 13.651] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-0"
[ 13.651] (**) NVIDIA(0): Option "ModeDebug" "1"
[ 13.651] (**) NVIDIA(0): Stereo disabled by request
[ 13.671] (**) NVIDIA(0): Option "MetaModes" "1920x1080 +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
[ 13.671] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.729] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 13.729] (EE) NVIDIA(0): system's kernel log for additional error messages and
[ 13.730] (EE) NVIDIA(0): consult the NVIDIA README for details.
[ 13.730] (EE) NVIDIA(0): *** Aborting ***
[ 13.730] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 13.730] (II) UnloadModule: "nvidia"
[ 13.730] (II) UnloadSubModule: "wfb"
[ 13.730] (EE) Screen(s) found, but none have a usable configuration.
[ 13.730]
Fatal server error:
[ 13.730] no screens found
[ 13.730] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 13.730] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 13.730] (EE)
[ 13.781] Server terminated with error (1). Closing log file.
There were no additional error messages that I could find. Files like /var/log/errors.log /var/log/kernel.log were empty.
I don't see why there's any reason Nvidia should be throwing a fit...the drivers are stated to be compatible with my card. Anyone have any ideas?
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 304.60 ([email protected]) Sun Oct 14 21:34:33 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VH242H"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560"
Option "ModeDebug" "1"
EndSection
Section "Screen"
# Removed Option "metamodes" "nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "CRT-0"
Option "Stereo" "0"
Option "metamodes" "1920x1080 +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ceff9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ceffa000-0x00000000cf082fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf083000-0x00000000cf089fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf08a000-0x00000000cf2b7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf2b8000-0x00000000cf2b8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf2b9000-0x00000000cf2c8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf2c9000-0x00000000cf2cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf2d0000-0x00000000cf2f6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf2f7000-0x00000000cf4f9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf4fa000-0x00000000cf783fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf784000-0x00000000cfef5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfef6000-0x00000000cfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000022effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.10 by American Megatrends
[ 0.000000] efi: SMBIOS=0xf0480 ACPI=0xcf083000 ACPI 2.0=0xcf083000 MPS=0xfcab0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000007f000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000007f000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000080000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fd0000) (14MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000fd0000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem07: type=4, attr=0xf, range=[0x0000000001100000-0x0000000001343000) (2MB)
[ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000001343000-0x0000000001347000) (0MB)
[ 0.000000] efi: mem09: type=4, attr=0xf, range=[0x0000000001347000-0x0000000001377000) (0MB)
[ 0.000000] efi: mem10: type=3, attr=0xf, range=[0x0000000001377000-0x000000000137e000) (0MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000000137e000-0x0000000001381000) (0MB)
[ 0.000000] efi: mem12: type=3, attr=0xf, range=[0x0000000001381000-0x0000000001385000) (0MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000001385000-0x0000000001386000) (0MB)
[ 0.000000] efi: mem14: type=3, attr=0xf, range=[0x0000000001386000-0x0000000001388000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000001388000-0x000000000138a000) (0MB)
[ 0.000000] efi: mem16: type=3, attr=0xf, range=[0x000000000138a000-0x000000000138b000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x000000000138b000-0x000000000138c000) (0MB)
[ 0.000000] efi: mem18: type=3, attr=0xf, range=[0x000000000138c000-0x000000000138d000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000000138d000-0x000000000138e000) (0MB)
[ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x000000000138e000-0x000000000138f000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x000000000138f000-0x0000000001395000) (0MB)
[ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x0000000001395000-0x0000000001397000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000001397000-0x00000000013ab000) (0MB)
[ 0.000000] efi: mem24: type=3, attr=0xf, range=[0x00000000013ab000-0x00000000013b3000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000013b3000-0x00000000013c3000) (0MB)
[ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x00000000013c3000-0x00000000013cb000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000013cb000-0x00000000013d1000) (0MB)
[ 0.000000] efi: mem28: type=3, attr=0xf, range=[0x00000000013d1000-0x00000000013f5000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000013f5000-0x00000000013f7000) (0MB)
[ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x00000000013f7000-0x00000000013f8000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000013f8000-0x00000000022eb000) (14MB)
[ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x00000000022eb000-0x00000000022ef000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000022ef000-0x00000000022fc000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000022fc000-0x000000000230d000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x000000000230d000-0x0000000002313000) (0MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x0000000002313000-0x0000000002319000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000002319000-0x0000000002321000) (0MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x0000000002321000-0x0000000002333000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000002333000-0x0000000002338000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000002338000-0x0000000002339000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000002339000-0x0000000002344000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x0000000002344000-0x0000000002345000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000002345000-0x0000000002347000) (0MB)
[ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x0000000002347000-0x0000000002362000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000002362000-0x0000000002368000) (0MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000002368000-0x0000000002370000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000002370000-0x0000000002375000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000002375000-0x0000000002388000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000002388000-0x000000000238f000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x000000000238f000-0x0000000002396000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x0000000002396000-0x00000000023af000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000023af000-0x00000000023b2000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x00000000023b2000-0x0000000002403000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x0000000002403000-0x0000000002404000) (0MB)
[ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x0000000002404000-0x0000000002406000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x0000000002406000-0x000000000240c000) (0MB)
[ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x000000000240c000-0x0000000002415000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x0000000002415000-0x000000000241b000) (0MB)
[ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x000000000241b000-0x0000000002420000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x0000000002420000-0x0000000002426000) (0MB)
[ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x0000000002426000-0x0000000002428000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x0000000002428000-0x000000000242b000) (0MB)
[ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x000000000242b000-0x000000000242f000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x000000000242f000-0x0000000002430000) (0MB)
[ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x0000000002430000-0x000000000279a000) (3MB)
[ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x000000000279a000-0x000000000279f000) (0MB)
[ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x000000000279f000-0x00000000027a4000) (0MB)
[ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000027a4000-0x00000000027a5000) (0MB)
[ 0.000000] efi: mem69: type=4, attr=0xf, range=[0x00000000027a5000-0x00000000027a7000) (0MB)
[ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000027a7000-0x00000000027ab000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x00000000027ab000-0x00000000027ac000) (0MB)
[ 0.000000] efi: mem72: type=3, attr=0xf, range=[0x00000000027ac000-0x00000000027b0000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000027b0000-0x00000000027b7000) (0MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x00000000027b7000-0x00000000027b9000) (0MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000027b9000-0x00000000027c2000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x00000000027c2000-0x00000000027c6000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000027c6000-0x00000000027ce000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x00000000027ce000-0x00000000027d0000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000027d0000-0x00000000027db000) (0MB)
[ 0.000000] efi: mem80: type=3, attr=0xf, range=[0x00000000027db000-0x0000000002b3d000) (3MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x0000000002b3d000-0x0000000002b41000) (0MB)
[ 0.000000] efi: mem82: type=3, attr=0xf, range=[0x0000000002b41000-0x0000000002b47000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x0000000002b47000-0x0000000002b49000) (0MB)
[ 0.000000] efi: mem84: type=3, attr=0xf, range=[0x0000000002b49000-0x0000000002b4b000) (0MB)
[ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x0000000002b4b000-0x0000000002b5a000) (0MB)
[ 0.000000] efi: mem86: type=3, attr=0xf, range=[0x0000000002b5a000-0x0000000002b5c000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x0000000002b5c000-0x0000000002b61000) (0MB)
[ 0.000000] efi: mem88: type=3, attr=0xf, range=[0x0000000002b61000-0x0000000002b72000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x0000000002b72000-0x0000000002b7a000) (0MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x0000000002b7a000-0x0000000002b7c000) (0MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x0000000002b7c000-0x0000000002b81000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x0000000002b81000-0x0000000002b86000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x0000000002b86000-0x0000000002b8e000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x0000000002b8e000-0x0000000002b92000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x0000000002b92000-0x0000000002bc8000) (0MB)
[ 0.000000] efi: mem96: type=3, attr=0xf, range=[0x0000000002bc8000-0x0000000002bdd000) (0MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x0000000002bdd000-0x0000000002da2000) (1MB)
[ 0.000000] efi: mem98: type=3, attr=0xf, range=[0x0000000002da2000-0x0000000002da4000) (0MB)
[ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x0000000002da4000-0x0000000002da6000) (0MB)
[ 0.000000] efi: mem100: type=3, attr=0xf, range=[0x0000000002da6000-0x0000000002da7000) (0MB)
[ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x0000000002da7000-0x0000000002daf000) (0MB)
[ 0.000000] efi: mem102: type=3, attr=0xf, range=[0x0000000002daf000-0x0000000002db3000) (0MB)
[ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x0000000002db3000-0x000000000321d000) (4MB)
[ 0.000000] efi: mem104: type=3, attr=0xf, range=[0x000000000321d000-0x000000000322f000) (0MB)
[ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x000000000322f000-0x0000000003318000) (0MB)
[ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x0000000003318000-0x0000000003387000) (0MB)
[ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x0000000003387000-0x000000000338c000) (0MB)
[ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x000000000338c000-0x000000000338e000) (0MB)
[ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000000338e000-0x0000000003393000) (0MB)
[ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x0000000003393000-0x0000000003397000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x0000000003397000-0x000000000339c000) (0MB)
[ 0.000000] efi: mem112: type=3, attr=0xf, range=[0x000000000339c000-0x000000000339e000) (0MB)
[ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000000339e000-0x00000000033a1000) (0MB)
[ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x00000000033a1000-0x00000000033a3000) (0MB)
[ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x00000000033a3000-0x00000000033a6000) (0MB)
[ 0.000000] efi: mem116: type=7, attr=0xf, range=[0x00000000033a6000-0x00000000033c2000) (0MB)
[ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x00000000033c2000-0x0000000003643000) (2MB)
[ 0.000000] efi: mem118: type=7, attr=0xf, range=[0x0000000003643000-0x0000000003662000) (0MB)
[ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x0000000003662000-0x00000000037dc000) (1MB)
[ 0.000000] efi: mem120: type=1, attr=0xf, range=[0x00000000037dc000-0x00000000037fa000) (0MB)
[ 0.000000] efi: mem121: type=7, attr=0xf, range=[0x00000000037fa000-0x00000000037fb000) (0MB)
[ 0.000000] efi: mem122: type=4, attr=0xf, range=[0x00000000037fb000-0x00000000038ab000) (0MB)
[ 0.000000] efi: mem123: type=7, attr=0xf, range=[0x00000000038ab000-0x00000000038cc000) (0MB)
[ 0.000000] efi: mem124: type=4, attr=0xf, range=[0x00000000038cc000-0x00000000038ed000) (0MB)
[ 0.000000] efi: mem125: type=7, attr=0xf, range=[0x00000000038ed000-0x0000000004000000) (7MB)
[ 0.000000] efi: mem126: type=2, attr=0xf, range=[0x0000000004000000-0x0000000004ed0000) (14MB)
[ 0.000000] efi: mem127: type=7, attr=0xf, range=[0x0000000004ed0000-0x0000000036f52000) (800MB)
[ 0.000000] efi: mem128: type=2, attr=0xf, range=[0x0000000036f52000-0x00000000377a1000) (8MB)
[ 0.000000] efi: mem129: type=7, attr=0xf, range=[0x00000000377a1000-0x000000009be61000) (1606MB)
[ 0.000000] efi: mem130: type=2, attr=0xf, range=[0x000000009be61000-0x00000000ceffa000) (817MB)
[ 0.000000] efi: mem131: type=10, attr=0xf, range=[0x00000000ceffa000-0x00000000cf083000) (0MB)
[ 0.000000] efi: mem132: type=9, attr=0xf, range=[0x00000000cf083000-0x00000000cf08a000) (0MB)
[ 0.000000] efi: mem133: type=6, attr=0x800000000000000f, range=[0x00000000cf08a000-0x00000000cf165000) (0MB)
[ 0.000000] efi: mem134: type=0, attr=0xf, range=[0x00000000cf165000-0x00000000cf278000) (1MB)
[ 0.000000] efi: mem135: type=6, attr=0x800000000000000f, range=[0x00000000cf278000-0x00000000cf27c000) (0MB)
[ 0.000000] efi: mem136: type=0, attr=0xf, range=[0x00000000cf27c000-0x00000000cf2b1000) (0MB)
[ 0.000000] efi: mem137: type=5, attr=0x800000000000000f, range=[0x00000000cf2b1000-0x00000000cf2b7000) (0MB)
[ 0.000000] efi: mem138: type=6, attr=0x800000000000000f, range=[0x00000000cf2b7000-0x00000000cf2b8000) (0MB)
[ 0.000000] efi: mem139: type=10, attr=0xf, range=[0x00000000cf2b8000-0x00000000cf2b9000) (0MB)
[ 0.000000] efi: mem140: type=0, attr=0xf, range=[0x00000000cf2b9000-0x00000000cf2c9000) (0MB)
[ 0.000000] efi: mem141: type=10, attr=0xf, range=[0x00000000cf2c9000-0x00000000cf2d0000) (0MB)
[ 0.000000] efi: mem142: type=5, attr=0x800000000000000f, range=[0x00000000cf2d0000-0x00000000cf2d2000) (0MB)
[ 0.000000] efi: mem143: type=6, attr=0x800000000000000f, range=[0x00000000cf2d2000-0x00000000cf2e4000) (0MB)
[ 0.000000] efi: mem144: type=5, attr=0x800000000000000f, range=[0x00000000cf2e4000-0x00000000cf2f4000) (0MB)
[ 0.000000] efi: mem145: type=6, attr=0x800000000000000f, range=[0x00000000cf2f4000-0x00000000cf2f7000) (0MB)
[ 0.000000] efi: mem146: type=10, attr=0xf, range=[0x00000000cf2f7000-0x00000000cf4fa000) (2MB)
[ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x00000000cf4fa000-0x00000000cf776000) (2MB)
[ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x00000000cf776000-0x00000000cf779000) (0MB)
[ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x00000000cf779000-0x00000000cf784000) (0MB)
[ 0.000000] efi: mem150: type=6, attr=0x800000000000000f, range=[0x00000000cf784000-0x00000000cfef6000) (7MB)
[ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x00000000cfef6000-0x00000000cff00000) (0MB)
[ 0.000000] efi: mem152: type=7, attr=0xf, range=[0x0000000100001000-0x000000022f000000) (4847MB)
[ 0.000000] efi: mem153: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem154: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem155: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB)
[ 0.000000] efi: mem156: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] efi: mem157: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
[ 0.000000] efi: mem158: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
[ 0.000000] efi: mem159: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: MSI MS-7693/970A-G46 (MS-7693), BIOS V1.5 02/16/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcdc0-0x000fcdcf] mapped at [ffff8800000fcdc0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfefffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfefffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfefffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x22effffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x22effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x22effffff @ [mem 0xceff6000-0xceff9fff]
[ 0.000000] RAMDISK: [mem 0x36f52000-0x377a0fff]
[ 0.000000] ACPI: RSDP 00000000cf083000 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000cf083068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000cf088f50 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120711/tbfadt-598)
[ 0.000000] ACPI: DSDT 00000000cf083140 05E0A (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cf2caf80 00040
[ 0.000000] ACPI: APIC 00000000cf089048 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000cf0890e8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000cf089128 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 00000000cf089160 00B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22effffff]
[ 0.000000] NODE_DATA [mem 0x22effc000-0x22effffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xceff9fff]
[ 0.000000] node 0: [mem 0xcf4fa000-0xcf783fff]
[ 0.000000] node 0: [mem 0xcfef6000-0xcfefffff]
[ 0.000000] node 0: [mem 0x100001000-0x22effffff]
[ 0.000000] On node 0 totalpages: 2089501
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3909 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 828110 pages, LIFO batch:31
[ 0.000000] Normal zone: 19392 pages used for memmap
[ 0.000000] Normal zone: 1221695 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ceffa000 - 00000000cf083000
[ 0.000000] PM: Registered nosave memory: 00000000cf083000 - 00000000cf08a000
[ 0.000000] PM: Registered nosave memory: 00000000cf08a000 - 00000000cf2b8000
[ 0.000000] PM: Registered nosave memory: 00000000cf2b8000 - 00000000cf2b9000
[ 0.000000] PM: Registered nosave memory: 00000000cf2b9000 - 00000000cf2c9000
[ 0.000000] PM: Registered nosave memory: 00000000cf2c9000 - 00000000cf2d0000
[ 0.000000] PM: Registered nosave memory: 00000000cf2d0000 - 00000000cf2f7000
[ 0.000000] PM: Registered nosave memory: 00000000cf2f7000 - 00000000cf4fa000
[ 0.000000] PM: Registered nosave memory: 00000000cf784000 - 00000000cfef6000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
[ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
[ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0xcff00000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022ec00000 s84608 r8192 d21888 u262144
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2053714
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=996407e6-20a3-422f-92f8-3d9fe913b87c ro quiet add_efi_memmap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8031632k/9158656k available (4727k kernel code, 800652k absent, 326372k reserved, 4143k data, 768k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:1288 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3600.223 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7203.46 BogoMIPS (lpj=12000743)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.002170] Security Framework initialized
[ 0.002173] AppArmor: AppArmor disabled by boot time parameter
[ 0.002659] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004635] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005496] Mount-cache hash table entries: 256
[ 0.005659] Initializing cgroup subsys cpuacct
[ 0.005660] Initializing cgroup subsys memory
[ 0.005668] Initializing cgroup subsys devices
[ 0.005669] Initializing cgroup subsys freezer
[ 0.005670] Initializing cgroup subsys net_cls
[ 0.005671] Initializing cgroup subsys blkio
[ 0.005689] tseg: 00cff00000
[ 0.005691] CPU: Physical Processor ID: 0
[ 0.005691] CPU: Processor Core ID: 0
[ 0.005693] mce: CPU supports 7 MCE banks
[ 0.005698] LVT offset 1 assigned for vector 0xf9
[ 0.005703] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift is 0xffffffff
[ 0.006360] ACPI: Core revision 20120711
[ 0.027571] ftrace: allocating 18347 entries in 72 pages
[ 0.034694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067650] smpboot: CPU0: AMD FX(tm)-4100 Quad-Core Processor stepping 02
[ 0.173402] Performance Events:
[ 0.173403] perf: AMD core performance counters detected
[ 0.173405] AMD PMU driver.
[ 0.173406] ... version: 0
[ 0.173407] ... bit width: 48
[ 0.173408] ... generic registers: 6
[ 0.173409] ... value mask: 0000ffffffffffff
[ 0.173410] ... max period: 00007fffffffffff
[ 0.173410] ... fixed-purpose events: 0
[ 0.173411] ... event mask: 000000000000003f
[ 0.200070] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.213354] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.276446] Brought up 4 CPUs
[ 0.276449] smpboot: Total of 4 processors activated (28813.85 BogoMIPS)
[ 0.283152] devtmpfs: initialized
[ 0.284932] PM: Registering ACPI NVS region [mem 0xceffa000-0xcf082fff] (561152 bytes)
[ 0.284943] PM: Registering ACPI NVS region [mem 0xcf2b8000-0xcf2b8fff] (4096 bytes)
[ 0.284944] PM: Registering ACPI NVS region [mem 0xcf2c9000-0xcf2cffff] (28672 bytes)
[ 0.284945] PM: Registering ACPI NVS region [mem 0xcf2f7000-0xcf4f9fff] (2109440 bytes)
[ 0.285814] NET: Registered protocol family 16
[ 0.285972] ACPI: bus type pci registered
[ 0.286025] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.286027] PCI: not using MMCONFIG
[ 0.286029] PCI: Using configuration type 1 for base access
[ 0.286029] PCI: Using configuration type 1 for extended access
[ 0.286582] bio: create slab <bio-0> at 0
[ 0.286639] ACPI: Added _OSI(Module Device)
[ 0.286640] ACPI: Added _OSI(Processor Device)
[ 0.286641] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.286642] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.287530] ACPI: EC: Look up EC in DSDT
[ 0.288539] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.291751] ACPI: Interpreter enabled
[ 0.291756] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.291773] ACPI: Using IOAPIC for interrupt routing
[ 0.291909] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.291948] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.314838] ACPI: No dock devices found.
[ 0.314841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.315011] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.315266] PCI host bridge to bus 0000:00
[ 0.315269] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.315271] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.315272] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.315274] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.315276] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.315277] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.315279] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.315280] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.315282] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.315292] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.315353] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.315386] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.315400] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.315432] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.315459] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.315474] pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
[ 0.315481] pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
[ 0.315488] pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
[ 0.315496] pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
[ 0.315503] pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
[ 0.315510] pci 0000:00:11.0: reg 24: [mem 0xfe20b000-0xfe20b3ff]
[ 0.315526] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.315563] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.315573] pci 0000:00:12.0: reg 10: [mem 0xfe20a000-0xfe20afff]
[ 0.315628] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.315642] pci 0000:00:12.2: reg 10: [mem 0xfe209000-0xfe2090ff]
[ 0.315704] pci 0000:00:12.2: supports D1 D2
[ 0.315706] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.315724] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.315734] pci 0000:00:13.0: reg 10: [mem 0xfe208000-0xfe208fff]
[ 0.315788] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.315803] pci 0000:00:13.2: reg 10: [mem 0xfe207000-0xfe2070ff]
[ 0.315865] pci 0000:00:13.2: supports D1 D2
[ 0.315866] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.315884] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.315941] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.315951] pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
[ 0.315958] pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
[ 0.315966] pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
[ 0.315973] pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
[ 0.315980] pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
[ 0.316009] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.316026] pci 0000:00:14.2: reg 10: [mem 0xfe200000-0xfe203fff 64bit]
[ 0.316076] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.316087] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.316145] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.316177] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.316188] pci 0000:00:14.5: reg 10: [mem 0xfe206000-0xfe206fff]
[ 0.316242] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.316298] pci 0000:00:15.0: supports D1 D2
[ 0.316320] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.316330] pci 0000:00:16.0: reg 10: [mem 0xfe205000-0xfe205fff]
[ 0.316384] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.316399] pci 0000:00:16.2: reg 10: [mem 0xfe204000-0xfe2040ff]
[ 0.316461] pci 0000:00:16.2: supports D1 D2
[ 0.316463] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.316481] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.316499] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.316516] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.316531] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.316549] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.316563] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.316603] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.316614] pci 0000:01:00.0: [10de:1201] type 00 class 0x030000
[ 0.316623] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff]
[ 0.316632] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.316641] pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xdbffffff 64bit pref]
[ 0.316647] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.316654] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.316704] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.316713] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
[ 0.323182] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.323186] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.323188] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
[ 0.323191] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.323213] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.323233] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.323250] pci 0000:02:00.0: reg 10: [mem 0xfe100000-0xfe107fff 64bit]
[ 0.323333] pci 0000:02:00.0: PME# supported from D3hot
[ 0.329835] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.329839] pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.329853] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.329895] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.329901] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.329903] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.329905] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.329906] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.329908] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.329909] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.329911] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.329946] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
[ 0.329965] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.329981] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.330006] pci 0000:04:00.0: reg 18: [mem 0xdc104000-0xdc104fff 64bit pref]
[ 0.330023] pci 0000:04:00.0: reg 20: [mem 0xdc100000-0xdc103fff 64bit pref]
[ 0.330094] pci 0000:04:00.0: supports D1 D2
[ 0.330095] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.336494] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 0.336499] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.336505] pci 0000:00:15.0: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.336519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.336629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.336688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.336720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 0.336748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
[ 0.336787] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.336789] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.342737] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.342794] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.342852] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.342911] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.342960] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.342994] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.343028] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.343061] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.343142] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.343144] vgaarb: loaded
[ 0.343145] vgaarb: bridge control possible 0000:01:00.0
[ 0.343179] PCI: Using ACPI for IRQ routing
[ 0.349476] PCI: pci_cache_line_size set to 64 bytes
[ 0.349547] e820: reserve RAM buffer [mem 0xceffa000-0xcfffffff]
[ 0.349550] e820: reserve RAM buffer [mem 0xcf784000-0xcfffffff]
[ 0.349551] e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
[ 0.349552] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[ 0.349635] NetLabel: Initializing
[ 0.349636] NetLabel: domain hash size = 128
[ 0.349637] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.349648] NetLabel: unlabeled traffic allowed by default
[ 0.349661] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.349664] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.351698] Switching to clocksource hpet
[ 0.357083] pnp: PnP ACPI init
[ 0.357093] ACPI: bus type pnp registered
[ 0.357237] pnp 00:00: [bus 00-ff]
[ 0.357241] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.357242] pnp 00:00: [io 0x0000-0x03af window]
[ 0.357244] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.357245] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.357247] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.357249] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.357250] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.357252] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.357253] pnp 00:00: [mem 0x00000000 window]
[ 0.357288] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.357318] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.357355] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.357358] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.357571] pnp 00:02: [io 0x040b]
[ 0.357572] pnp 00:02: [io 0x04d6]
[ 0.357574] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.357575] pnp 00:02: [io 0x0c14]
[ 0.357576] pnp 00:02: [io 0x0c50-0x0c51]
[ 0.357578] pnp 00:02: [io 0x0c52]
[ 0.357579] pnp 00:02: [io 0x0c6c]
[ 0.357580] pnp 00:02: [io 0x0c6f]
[ 0.357581] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.357583] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.357584] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 0.357585] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 0.357586] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 0.357588] pnp 00:02: [io 0x0800-0x089f]
[ 0.357589] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.357591] pnp 00:02: [io 0x0000-0x000f]
[ 0.357592] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.357593] pnp 00:02: [io 0x0900-0x090f]
[ 0.357594] pnp 00:02: [io 0x0910-0x091f]
[ 0.357596] pnp 00:02: [io 0xfe00-0xfefe]
[ 0.357597] pnp 00:02: [io 0x0060-0x005f disabled]
[ 0.357599] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 0.357600] pnp 00:02: [io 0x0485-0x0486]
[ 0.357601] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.357603] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.357604] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 0.357605] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 0.357607] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 0.357608] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.357609] pnp 00:02: [mem 0xff800000-0xffffffff]
[ 0.357664] system 00:02: [io 0x040b] has been reserved
[ 0.357666] system 00:02: [io 0x04d6] has been reserved
[ 0.357668] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.357669] system 00:02: [io 0x0c14] has been reserved
[ 0.357671] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.357673] system 00:02: [io 0x0c52] has been reserved
[ 0.357674] system 00:02: [io 0x0c6c] has been reserved
[ 0.357676] system 00:02: [io 0x0c6f] has been reserved
[ 0.357677] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.357679] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.357681] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.357682] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.357684] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.357687] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.357689] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.357690] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.357692] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.357694] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.357696] system 00:02: [io 0x0485-0x0486] has been reserved
[ 0.357698] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.357700] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.357702] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.357703] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.357705] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.357707] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.357709] system 00:02: [mem 0xff800000-0xffffffff] has been reserved
[ 0.357711] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.357836] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.357839] pnp 00:03: [io 0x0a00-0x0a0f]
[ 0.357841] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.357842] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.357879] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.357882] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358038] pnp 00:04: [io 0x03f8-0x03ff]
[ 0.358044] pnp 00:04: [irq 4]
[ 0.358046] pnp 00:04: [dma 0 disabled]
[ 0.358089] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.358099] pnp 00:05: [dma 4]
[ 0.358101] pnp 00:05: [io 0x0000-0x000f]
[ 0.358102] pnp 00:05: [io 0x0081-0x0083]
[ 0.358104] pnp 00:05: [io 0x0087]
[ 0.358105] pnp 00:05: [io 0x0089-0x008b]
[ 0.358106] pnp 00:05: [io 0x008f]
[ 0.358107] pnp 00:05: [io 0x00c0-0x00df]
[ 0.358127] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.358135] pnp 00:06: [io 0x0070-0x0071]
[ 0.358139] pnp 00:06: [irq 8]
[ 0.358160] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.358166] pnp 00:07: [io 0x0061]
[ 0.358187] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.358207] pnp 00:08: [io 0x0010-0x001f]
[ 0.358209] pnp 00:08: [io 0x0022-0x003f]
[ 0.358210] pnp 00:08: [io 0x0044-0x005f]
[ 0.358211] pnp 00:08: [io 0x0062-0x0063]
[ 0.358212] pnp 00:08: [io 0x0065-0x006f]
[ 0.358214] pnp 00:08: [io 0x0072-0x007f]
[ 0.358215] pnp 00:08: [io 0x0080]
[ 0.358216] pnp 00:08: [io 0x0084-0x0086]
[ 0.358217] pnp 00:08: [io 0x0088]
[ 0.358219] pnp 00:08: [io 0x008c-0x008e]
[ 0.358220] pnp 00:08: [io 0x0090-0x009f]
[ 0.358221] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.358224] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.358225] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.358267] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.358270] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358277] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.358280] pnp 00:09: [irq 13]
[ 0.358301] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.358347] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358474] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.358516] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358605] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.358607] pnp 00:0c: [mem 0xfec20000-0xfec200ff]
[ 0.358652] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.358654] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358765] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.358797] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.358800] pnp: PnP ACPI: found 14 devices
[ 0.358801] ACPI: ACPI bus type pnp unregistered
[ 0.365282] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.365285] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.365288] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]
[ 0.365290] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.365293] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.365296] pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.365299] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.365308] pci 0000:00:15.0: PCI bridge to [bus 04]
[ 0.365310] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 0.365315] pci 0000:00:15.0: bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.365339] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.365341] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.365343] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.365344] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.365346] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.365347] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.365348] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.365350] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.365351] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
[ 0.365353] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
[ 0.365354] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.365356] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.365357] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.365359] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.365360] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.365362] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.365363] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.365365] pci_bus 0000:03: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.365366] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.365368] pci_bus 0000:04: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
[ 0.365389] NET: Registered protocol family 2
[ 0.366003] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.367665] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.367870] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.367896] TCP: reno registered
[ 0.367908] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.367945] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.368031] NET: Registered protocol family 1
[ 0.674641] pci 0000:01:00.0: Boot video device
[ 0.674687] PCI: CLS 64 bytes, default 64
[ 0.674727] Unpacking initramfs...
[ 0.796668] Freeing initrd memory: 8508k freed
[ 0.798617] PCI-DMA: Disabling AGP.
[ 0.798682] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.798683] PCI-DMA: using GART IOMMU.
[ 0.798685] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.802600] LVT offset 0 assigned for vector 0x400
[ 0.802627] perf: AMD IBS detected (0x000000ff)
[ 0.802819] audit: initializing netlink socket (disabled)
[ 0.802834] type=2000 audit(1353475492.683:1): initialized
[ 0.811826] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.813829] VFS: Disk quotas dquot_6.5.2
[ 0.813869] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.813986] msgmni has been set to 15916
[ 0.814168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.814209] io scheduler noop registered
[ 0.814210] io scheduler deadline registered
[ 0.814253] io scheduler cfq registered (default)
[ 0.814512] efifb: probing for efifb
[ 0.814782] efifb: framebuffer at 0xd9000000, mapped to 0xffffc90012780000, using 3072k, total 3072k
[ 0.814783] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.814784] efifb: scrolling: redraw
[ 0.814786] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.826475] Console: switching to colour frame buffer device 128x48
[ 0.838117] fb0: EFI VGA frame buffer device
[ 0.838139] GHES: HEST is not enabled!
[ 0.838191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.858663] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.879351] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.879522] Linux agpgart interface v0.103
[ 0.879569] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.879885] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.879900] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.880017] mousedev: PS/2 mouse device common for all mice
[ 0.880045] rtc_cmos 00:06: RTC can wake from S4
[ 0.880140] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.880158] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.880165] cpuidle: using governor ladder
[ 0.880166] cpuidle: using governor menu
[ 0.880267] drop_monitor: Initializing network drop monitor service
[ 0.880322] TCP: cubic registered
[ 0.880410] NET: Registered protocol family 10
[ 0.880525] NET: Registered protocol family 17
[ 0.880532] Key type dns_resolver registered
[ 0.880798] PM: Hibernation image not present or could not be loaded.
[ 0.880804] registered taskstats version 1
[ 0.881453] rtc_cmos 00:06: setting system clock to 2012-11-21 05:24:53 UTC (1353475493)
[ 0.883256] Freeing unused kernel memory: 768k freed
[ 0.883387] Write protecting the kernel read-only data: 8192k
[ 0.888716] Freeing unused kernel memory: 1408k freed
[ 0.891110] Freeing unused kernel memory: 568k freed
[ 0.897826] systemd-udevd[53]: starting version 195
[ 0.899858] SCSI subsystem initialized
[ 0.900780] ACPI: bus type scsi registered
[ 0.900827] libata version 3.00 loaded.
[ 0.902143] scsi0 : pata_atiixp
[ 0.902492] scsi1 : pata_atiixp
[ 0.902632] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.902633] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.076344] ahci 0000:00:11.0: version 3.0
[ 1.076438] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.076440] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.077771] scsi2 : ahci
[ 1.078171] scsi3 : ahci
[ 1.078413] scsi4 : ahci
[ 1.078607] scsi5 : ahci
[ 1.078895] ata3: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b100 irq 19
[ 1.078899] ata4: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b180 irq 19
[ 1.078902] ata5: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b200 irq 19
[ 1.078905] ata6: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b280 irq 19
[ 1.396833] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.396862] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.563219] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.563244] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.565550] ata4.00: ATAPI: ASUS DRW-24B1ST c, 1.05, max UDMA/100
[ 1.566401] ata4.00: configured f

Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
[ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
NVRM: this kernel module has the version 304.60. Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
Output of pacman -Qs nvidia:
local/conky-nvidia 1.9.0-2
An advanced, highly configurable system monitor for X based on torsmo
local/lib32-nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries. (32-bit)
local/libvdpau-git-flashpatch 20120825-1
Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
local/libxnvctrl 304.51-1
NVIDIA X Ctrl library
local/nvidia 310.19-2
NVIDIA drivers for linux.
local/nvidia-utils 310.19-1
NVIDIA drivers utilities and libraries.

Similar Messages

  • TS3354 I have an Nvidia GTX 580 and a Dell U2711, which has HDCP support.  Why do I get the message in itunes that my hardware does not support it?

    I have an Nvidia GTX 580 and a Dell U2711, which has HDCP support.  Why do I get the message in itunes that my hardware does not support it?
    I downloaded 1080p content, not sure why this would not work with the hardware I have.
    Bryan

    Updated first post with dmesg output. I added all of it, but here's a quick snippet of the tail (which is right after booting up and attempting to autostart SLiM)
    [ 13.426857] NVRM: API mismatch: the client has the version 310.19, but
    NVRM: this kernel module has the version 304.60. Please
    NVRM: make sure that this kernel module and all NVIDIA driver
    NVRM: components have the same version.
    Why is the kernel getting 304.60 ? That's got to be the issue, but I don't why the kernel is getting 304.60 ...
    Output of pacman -Qs nvidia:
    local/conky-nvidia 1.9.0-2
    An advanced, highly configurable system monitor for X based on torsmo
    local/lib32-nvidia-utils 310.19-1
    NVIDIA drivers utilities and libraries. (32-bit)
    local/libvdpau-git-flashpatch 20120825-1
    Nvidia VDPAU library from git with patch to fix flash blue tint and bleed through
    local/libxnvctrl 304.51-1
    NVIDIA X Ctrl library
    local/nvidia 310.19-2
    NVIDIA drivers for linux.
    local/nvidia-utils 310.19-1
    NVIDIA drivers utilities and libraries.

  • Nvidia GTX 560 Ti Twin Frozr driver hanging.. even after fresh OS install

    Dear,
    Sorry for my english 
    I'm facing issue with my Nvidia GTX 560 Ti Twin Frozr II, and I saw other do have... 
    My config :
    When using windows, or games (I'm Crysis addicted ) I get a screen freeze, a blank (black) screen and after seconds a video driver message saying that it recovers the display as it were not responding anymore....
    It happens without reason to me and temperature isn't related as it happen even with a temp of 45°c....
    I've tried :
    Updating driver, downgrading them,
    Re installing Windows (x64),
    Updating motherboard Bios (P55a-UD3R Gigabyte with latest bios version)
    Flashing my OCZ Vertex 3 SSD (a pain ....)
    Upgrading my power supply to a Corsair 750GS
    Nothing corrects the problem.
    At last I 'm looking to upgrade video bios but I don't want to brick my precious video card...
    So I'm requesting your help to use "THE" good file version of video bios using  NVFlash 5.118 for Windows for example.
    Overclocking isn't my goal, stability is...
    Thanks a lot for your help... as I ain't find video bios file on MSI support site....

    You are lightning fast !! 
    880 -> 822
    1050 -> 2000
    I sure have done an error here !!     
    Modification will be done as soon as I get close to my Crysis PC... (ETA 18h00 GMT+1  )
    880 -> 822 won't be noticable
    1050 -> 2000 will result in a massive perf improvement ??
    I red :
    4000M hz !!!!
    I believe it's all wrong...

  • Nvidia GTX 560 Ti support

    Hello. I'll be buying a new PC. One important aspect of the new configuration for me is the support for linux. The hardware that I think most linux folks have problem with is the graphics card. I want you to give me your opinion on Nvidia GTX 560 Ti. How well does it perform on linux and are there any significant problems that I may encounter should I decide to buy it?

    I have one, it has had a couple of issues with the open-source (nouveau) drivers in the past year which prevented booting for several kernel releases. If you use the propriety blob, you'll probably be okay.
    Plays TF2 on Linux flawlessly.

  • Nvidia GTX 560 Ti Twin Frozr, texture bugs in Arma2

    Hello,
    I suffer a severe problem on Arma2 with my GPU.
    Observed: Rapid texture flickering on objects at short, random intervals. Problem exacerbated when zooming in. Settles after some time but returns to flicker randomly.
    Behaves as though it's jumping to lower LODs because of lack of memory or something.
    htt p://i944.photobucket.com/albums/ad288/scajolly/helpme.jpg <--- Screenshot ( shows the problem on the left side, not on the right side.
    Attempted to change all individual graphical settings available in the game from lowest/off to highest, none sufficed to remove the bug (though of course I could not try all n^n combinations). Also tried Nvidia beta-driver, did nothing.
    Problem was reproduced on another computer which also used the same GPU (not got the specs for it yet though).
    The equipment used:
    CPU: Intel i5-2500k, 3.3GHz, OC'd to 4.2GHz
    MB: MSI P67A-C45 (MS-7673)
    Memory: 2x Corsair 4GB 1600 DDR3
    HD: Samsung HD502HJ ATA
    GPU: MSI Nvidia GeForce GTX 560 Ti Twin Frozr
    GPU driver: 295.73 (latest)
    OS: Win 7 64b
    PSU: CoolerMaster GX 550W 12V (beware, fault reproduced on a separate but similar rig with far bigger PSU)

    Hello Svet,
    No, I do not encounter issues in any other games.
    As an addendum, the above texture flickering will also occur when I am at stock CPU speed -- 3.3GHz.

  • Can't get GeForce GTX 560 Ti card CUDA to work with new Premiere Pro CC 2014 version

    In the past I've been able to get CUDA on my GeForce GTX 560 Ti card to work with Mercury Playback engine by adding "GeForce GTX 560 Ti" to the cuda_supported_cards.txt file. But with the new CC 2014 version of Premiere, that file isn't in the Premiere Pro directory anymore. Is there a way to get my GTX 560 Ti to be listed as a CUDA-supported card with CC 2014?

    Okay, I figured it out.  I installed the latest graphics driver and then opened the NVIDIA control panel.  In there I selected "Manage 3D settings" and went to the "program settings" tab.  I selected Adobe Premiere (adobe premiere pro.exe) from the list and under the "CUDA - GPUs" feature, I changed it to "Use these GPUs" and selected my GTX 560 Ti (which was the only one listed).
    After doing that, I opened Premiere Pro CC 2014 and selected "Project Settings - General" and was then able to choose "Mercury Playback Engine GPU Acceleration" under Renderer (which had previously been unavailable).
    Hopefully this will help someone else if they encounter the same problem.

  • HT201210 i have followed all these steps and it still wont work.. any other suggestions? please help!

    Just trying to restore my phone, and i have followed all the steps yet none of them have worked. any other ways to do this?

    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
    If the above doesn't work, then take it in to an Apple retailer for help.

  • Firefox will not open. I have tried to uninstall and this wont work. I have laded beta version but I still can't uninstall earlier version. I would prefer the earlier version working. I have tried to update this version and that wont work either

    I can't open firefox. I have tried to update, repair and uninstall and nothing works. I have checked that it is not already running. I have restored my pc to an earlier date, completed scans but it will still not work. I have loaded the beta version ok but I am not keen on it and would prefer the earlier version.
    Can you help please

    http://www.oldversion.com/Mozilla-Firefox.html
    Got to this site and there you can find older versions of firefox
    Vet

  • HT1212 i have forgotten my passcode and i have tried the restore option but it just wont work

    I tried restoring it but it wont work it just keeps coming up with the sign saying "you cant use itunes with this device until you put in passcode". And its getting really fustrating please help

    If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

  • Nvidia GTX 560 Ti HAWK

    Where can i get VBIOS updates for my graphic card?
    Version: 70.24.11.00.00

    And now its different:
    https://www.dropbox.com/s/g9v96gi9t3f6xyg/MSIKombustorDX11%202012-05-17%2023-28-54-45.bmp
    https://www.dropbox.com/s/c9vnimm4b6rz1q2/MSIKombustorDX11%202012-05-17%2023-28-56-39.bmp
    https://www.dropbox.com/s/cwls8ccpsm41kau/MSIKombustorDX11%202012-05-17%2023-29-04-02.bmp

  • I just tried to update my iphone 4 to the 5.01. My iphone  backed up and started update but now its stuck in recovery mode and will not restore. It gives me an error message of 1, but I have tried everything on troubleshoot list and still wont work!!!!

    I just tried to update my iphone 4 to the 5.01. It said that my phone backed up and started update. i went on a run and came back and my phone is now stuck in recovery mode. It keeps saying that there is an unknown error, 1. I have tried everything on the troubleshooting list and cannot figure out what is wrong! Please HELP!!!

    http://support.apple.com/kb/TS3694#error1

  • Hello i am having trouble installing itunes 10.5 on my laptop i have windows vista. it says error 7 windows error 998. i now have no itunes. i have tried to uninstall itunes but it still wont work and keep coming up with that message. please help!

    hello
    i am having major trouble installing itunes. i had itunes working fine and i went to update it as it told me there was an update which i thought i did. i went on my laptop the next day and it said "itunes was not installed correctly error 7 windows error 998"
    i read a few articles on here but i am having no joy. i uninstalled itunes and reinstalled and that did not work. i also unistalled some other apple things cant remember the names sorry!
    i am not a whiz on a computer so really need some help please!!

    Installing, and uninstalling, applications never touches or removes the data.
    Clean out and uninstall all the apple programs and software thru Programs and manually.
    Might want to use Revo and CCleaner
    I always use manual standalone installers (and keep a couple backup versions)
    itunes 10.5 may affect iTunes media playlists, not sure, depends on what you have.
    A search of these forums will show some threads.
    I'd clean up vista, you need SP2 or later, and specific error message?
    I wonder as you arenot the first with a dell if maybe the OS or included software.
    Security programs like Norton and older versions of Kaspersky have been implicated.
    Also settings in IE that affect pop-ups and plug-ins.

  • I have windows 7 and I have tried to download itunes three times, it wont work. Are there older versions I can use?

    I have windows 7, I have attempted to download Itunes three times. It will not work.

    Window's problem. The Apple Servers have work fine for the last 24 hour (apart from the Apple Support community forum update an hour ago).

  • I have an ipod 4th gen but my clickwheel wont work-help?

    I have tried almost everything! My clickwheel has not been working for like a year now. I have tried resetting it, restoring, and all that. What do i do? D:

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HT1212 my iPod touch says disabled have tried twice to restore it but it wont work

    My son's iPod touch is disabled.  I've tried to restore it twice but it won't work.  Any ideas?

    Not knowing what your tried and what happened:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • Getting stuck in the Review Quiz option

    Hello, When from the Quiz results slide, a user clicks the Review Quiz button, it lets the user click through the slides and review, but none of the buttons take the user back to the quiz results slide when they are done reveiwing the quiz. I've seen

  • Another problem with SOAP sender

    I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post. Scenario: Soap Sender -> PI -> Soap Receiver Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "

  • DMS - Information Needed

    Hi All, I am working on DMS. I am a fresher in this domain. I need some help to understand the different options available with DMS. I need clarification on the following front 1.  Can we use DMS without Content server ? If yes then how ? 2.  If we u

  • Mini shows connect to outlet icon, cant get it to do anything

    updated ipod mini software, it asked me to connect it to power outlet, i did so. now it shows an icon (ipod charger connected to outlet) cant get it recognized by pc, the computer doesnt see it. when i turn on the ipod it shows the apple icon and the

  • Modeling for 2LIS_08TRTLP

    Hello Experts, I'm activating the 2LIS_08TRTLP extractor and I want to load the data into an ODS which it's key will be shipment doc number and shipment doc item number. My problem is that I can't find the doc item number field (TPNUM) in the logisti