I have an O S X 10.8.5 and an epsom sx600fw and i cannot get it to print anything from textedit or any other text although it will make copies . please help
i have an O S X 10.8.5 and an epsom SX600 FW printer and i cannot get it to print from Textedit or anything else ! although it seems to do coloured borders but not text. it does make copies ,but will not print. please help ,i urgently need to type and print a letter.
i have an O S X 10.8.5 and an epsom SX600 FW printer and i cannot get it to print from Textedit or anything else ! although it seems to do coloured borders but not text. it does make copies ,but will not print. please help ,i urgently need to type and print a letter.
Similar Messages
-
I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning
BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later -
I can't sync additional photos cause I have my pc reformatted. =( is there any other way to add these photos? please help me. these existing photos are very important to me. ='((
Apple has not saidwhy they did it that way and it is against the terms of this forum to speculate on the reasons. It says not to:
"Discussions of Apple policies or procedures or speculation on Apple decisions."
The are third-party programs like TouchCopy that I think will allow you to do what you want. You can import photos via DropBox. The third-party programs will I know allow you to transfer the photos to your "new" computer. -
To add meta tags, you open your published .html pages with TextEdit or any other text editor and modify as required. You have to do redo it each time you republish. I need step by step instructions on how to accomplish this please .
Rage Sitemap Automator and iWeb SEO Tool are two different applications.
Use SEO Tool to add the title tag and meta description. These need to be added to the html file for every page of your website. SEO Tool stores all these so that when you republish you only need to add tags to any new pages and click the re-apply button to refresh the existing ones.
Once you have added. refreshe the tags with iWeb SEO Tool and uploaded the files with your FTP application, then open the site in Sitemap Automator and create and upload a new sitemap.
Once you have set up accounts with Google, Yahoo and Bing, verified your site with each and submitted a sitemap, on subsequent publishing Sitemap Automator will resubmit the sitemap with one button click. It will also notify Ask.com whch doesn't require an account since you can add your domain name to this URL to ping them...
http://submissions.ask.com/ping?sitemap=http%3A//www.domain.com/sitemap.xml -
how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?
Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ? -
I have just purchased an ipad3 mainly for storing and viewing my photos but I cannot get my photos to sync using itunes. Does anyone have the best solution please?
See http://support.apple.com/kb/HT4236
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
This may interest you.
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Since you are new to iPad.....
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
Hi,
I have just installed Windows 7 Home Premium on my Mac book Pro 13inch, it installed successfully but there is no network connection. Yet when I go on my Mac I can get online no problem. Please help or what other way I can do to connect windows online?Did you download Windows Support Software when you started installing windows via Bootcamp. If yes you need to then install the Support Software after installing windows which contains Windows drivers for Mac hardware.
-
I am having problems transferring my downloaded purchased from my iPhone even after following instructions! Can someone please help!!!??
Hey CrystalKean,
Thanks for the question. If you have purchased content on your iPhone that has not yet been transferred to your computer, see the following article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Alternatively, you can download previous purchases from the iTunes Store with the steps outlined in this article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
Im a ex windows vista user, who evently became fed up and converted to a macbook pro. i just purchesed the macbook pro yesterday and have been trying to transfer all my music, contacts, notes, apps, etc. from my iphone 4 onto my new macbook pro. nothing seem to be working without it trying to erase all my info off of my iphone 4. I didnt think this would be a issue where they are both apple devices, but im now starting to regret the decision to purchace this macbook pro. please help me so i dont loose all my info trying to sync both devices. thanks for you help and advice
Welcome to the Apple Support Communities
You can only sync the iPhone with one Mac or PC, so your Mac is asking you to erase the device because you synced it with another Mac or PC. To avoid this, I recommend you to copy the "iTunes" folder of your old Mac or PC (in Music folder) to the Music folder of your Mac, so you'll have the same data on your Mac as the data you had on the PC.
To transfer contacts, notes, etc., I recommend iCloud > http://www.apple.com/icloud/setup/ -
My lock button just stopped working on my iPhone 4. I was wondering if there was any other way to take screenshots? Please help!!
Hi jess,
If your phone is only 4 months old, you should take it back to your Apple Store and have it replaced.
Cheers,
GB -
Couldn't find the answer to this in any other forum about the MacProtector Malware. Please HELP!!!
I clicked on a link while reading a story about vegetarian athletes today and the MacProtector malware downloaded to my computer. I DID NOT install the application when the installer opened. I immediately started searching for support on what to do. I exited the installer and rebooted in safe mode. I found the program in the downloads menu and put it in the trash. I emptied my trash. I have looked through all of the possible places the program could be hiding and I did not see anything. Am I safe? Should I still change my password? Also, will the virus be able to find my credit card information linked to iTunes or any other shopping websites? Should I start using Foxfire permanently instead of safari?
I would appreciate any help- even though I know this has been discussed quite a bit!Hi, here is how to remove it by yourself...
http://goo.gl/J7R6A
Script that I create which, will help you remove it ..... (Let me know using the contact at that site.)
http://goo.gl/rGV62
What is does.
Depending on the version it just creates a bunch of random fake notification and claims your infected. If you keep getting it then most likely you have Allow popups and "Open Safe files" in safari on. The only damage is if you give the criminals that created it your Credit Card.
It is changing so it depend on the version but these two links should help. -
Have moved to the UK from the US and want to use up credit on existing account. I no longer have those US card details, so whilst I have credit it is asking me for card details I no longer have, There is money to be spent, any suggestions? Also am wanting to use itunes UK so have tried to set up a new account but inspite of putting in UK address it is identifying me as inithe US. Is this to do with the laptop I've brought with me?
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...
Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments -
In my icloud account on my iphone I have three ios devices. How do I manage the backup of my old phone ? I dont want to detete that backup completetly, just manage that phone back up ? Please help!
It will be backed up on your computer and can later be restored to an iOS device using iTunes, if desired. Of course, if your hard drive crashes you'll lose it if it isn't backed up somewhere else. If you want to included it in your computer backup, it will be located at one of the following locations:
Mac OS X: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup -
I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.
Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara
Maybe you are looking for
-
Auto-renew with multiple devices and multiple accounts
Hi, We have an app that user can create auto-renew subscription in our service. The app need one account in our service and he can create a subscription for this user in our service, so, if he make login in our app on iphome, ipad, web, android, etc.
-
Is it possible to make st more responsive?
I like st - it's lean and mean and slow as hell e.g. when I use the cursor keys. OK, so the last one is hardly a virtue, but maybe we can teach st to behave more like urxvt, which is a faster, but more complex piece of software and uses more memory.
-
How can I change the style of a google map in Adobe Muse?
I have seen some nice changes of google maps out there. This tool helps you to customize your maps. http://gmaps-samples-v3.googlecode.com/svn/trunk/styledmaps/wizard/index.html When I want to integrate a google map I copy in something like this: <if
-
Maxl statement create or replace database freezes essbaseserver
We run on daily basis maxl scripts to copy database from one application to another. with statements like: alter system logout session on database 'Devel_H'.'HRM'; create or replace database 'INform'.'HRM' as 'Devel_H'.'HRM'; We just migrated (from e
-
What is the serial number for I phone 5 charger?
I want to know the I phone 5 charger serial number? help