I have an old G3 I would like to donate, but I have forgotten my password and cannot erase the two partitions on my disk.

I have an old G3 I would like to donate, but I have forgotten my admin password and cannot erase the two partitions on my disk. I have the CD for 10.3.9 that one partition is running but when I boot from the CD, it wants to set up by connecting to the internet and I cannot connect on the old machine.
I've tried several schemes by logging in with command s and carefully typing directions, but when I reboot it just gives me the old admin.
It keeps trying to connect to network which I do not want to do.
I guess no one really wants an old G3 but I used it for years and I hate to destroy it.

Sure you can.
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
No password is required for this unless you set up a firmware password.

Similar Messages

  • HT201401 I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to und

    I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to under ringtones. Does anyone have any tips on how to do this.

    http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
    https://discussions.apple.com/message/17777381 - making a ringtone
    Getting ringtones folder to show in iTunes - https://discussions.apple.com/thread/2629494 - iTunes > Preferences. Under the General tab below Show, confirm Ringtones is selected

  • HT4847 I have a new iphone and cannot delete the backup from icloud.  It says that it is in use.  I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accoun

    I have a new iphone and cannot delete the backup from icloud.  It says that it is in use.  I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.

    Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

  • I have forgotten my password and my iphone is disabled. I have tried to resetting it but every time the time is up and i think it will work it says "can't connect to iphone because password is on" how do reset my iphone 5?

    I have forgotten my password and my iphone is disabled. I have tried resetting it but every time the time is up and I think it will work, it says "cant connect to iphone because password is on" how do i reset my iphone 5?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I have forgotten my password and have not backed my iphone up how can i get to my photos

    I have forgotten my password and have not backed my iphone up how can i get to my photos.

    If you have synced your phone with a computer connect to that computer and you can back it up without the passcode. If you have not synced to a computer there is no way to recover data without the passcode.

  • I have forgotten my password and locked my phone, how can i clear the problem

    I have forgotten my password and locked my phone, how can i clear the problem

    By coincidence, this happened to my son just last night.  You do NOT have to restore it to a new phone, but you probably want a current backup.
    Luckily, you can still sync and back it up even if it's locked, so connect it to the computer you usually sync it to. Go to the summary page. It's easiest and fastest to use a local backup, so if iCloud backup is on, turn it off and click "Backup now".  
    After it backs up, either click "Restore iPhone", or
    - hold home and the top button until the screen goes black, release the top and continue to hold the home button until iTunes says "iPhone in recovery mode detected". 
    Follow instructions to restore from backup, and then sync to restore content.  Your phone will come up in an unlocked state. If you have any stuff that was purchased directly to the iPhone (only), you'll have to re-download it. 
    Remember to turn iCloud backups back on if you use them.
    If you don't sync you iPhone to a computer then I *think* those instructions with the buttons will put it into a mode where you can restore it from the cloud (make sure it is NOT connected to a computer while you do this). Otherwise, you will have to restore it as a new phone, then go to settings, reset, then restore it from the cloud.

  • What can I do? I've forgotten my password and dont remember the answers to my sercurity questions, and no longer have access to the email account i used for backup. How do I get my icloud password reset?

    What can I do? I've forgotten my password and dont remember the answers to my sercurity questions, and no longer have access to the email account i used for backup. How do I get my icloud password reset? Please help. Thanks in advance.

    Please see Kappy's User Tip here:
    https://discussions.apple.com/docs/DOC-4551

  • We have a Canon SX40Hs and cannot activate the digital zoom function. can you help?Thanks

    We have a Canon SX40Hs and cannot activate the digital zoom function.  I have tried changing the mode from Auto to "P" to "Tv" etc and the dig zoom function is greyed out and not accessible.  Any help?
    Thanks

    Actually, this is a friend's camera, but yes, I went to the menu and when I got to the digital zoom option, it is greyed out (not accessible).  That is the problem.  I shoot in the EOS line so figured maybe there was a custom function somewhere that was causing the problem, but Power shot line apparentley doesn't have custom functions.  Thought maybe digital zoom is only availabel in certain modes (pernaps not available in "green square"), but changing mode didn't seem to make it accessible either.  I am just not familiar with the powershot cameras so ...  any other suggestions?

  • Is there a link to photoshop lightroom 5,  i have a mac air, and cannot use the cd to download it.

    I have photoshop lightroom 5, however, i have a mac air, and cannot use the cd to download it. Where can I find a link to the right download, as i think it is different then the creative suite version.
    Thanks!

    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1

  • I have forgotten my password and misplaced my Installation disc and need to reset password, help please! btw are the intsallation disc unique to each computer or could i borrow a friends?

    I have forgotten my password and misplaced my Installation disc and need to reset password, help please! btw are the intsallation disc unique to each computer or could i borrow a friends?

    Call Apple to get replacement DVDs > http://support.apple.com/kb/HE57

  • HT204074 I have forgotten my password therefore cannot access any information you will send to that mail

    I have forgotten my password, therefore cannot access any email that you will send there, to enable me recover and update my apple stores.
    Therefore kindly help me out.
    Thank you
    <E-mail Edited by Host>

    We are fellow users here on these public forums, you're not talking to iTunes Support - I've asked the hosts to remove your email address from your post.
    If you've forgotten the password to your iTunes account then does this page help you get access to it : http://iforgot.apple.com
    If you don't have access to your email account that reset info is sent to then you will need to contact iTunes Support / Apple to get your iTunes account password reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

  • TS3274 I have an iPad 1 and cannot get the Apps to complete the updates. I have deleted my account, reset the iPad, signed back into my account, synced with my Airbook and they still won't update. what can I try next? Thank you

    I have an iPad 1 and cannot get the Apps to complete their updates. I have deleted my account, reset the iPad, signed back into my account, synced with my Airbook and they still won't update. what can I try next? Thank you

    Look and see if you have a stalled download in iTunes - it could be a song or a podcast - if there is something that has not completed in there, your app updates will not download. Finish those downloads first, if you have any.
    Check to make sure.

  • I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

    I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file.  I have run a number of searches and  cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
    Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps.  The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members.  I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
    Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

    My apologies Eadeszoo I believe our support agents are unavailable on January 1.
    Are you able to copy the contents of the DVD to your computer?  Are you receiving any particular error messages when you are trying to install?  Finally which operating system are you using?

  • I am unable to receive or send emails, when I go into settings I cannot resolve this problem as I have forgotten my password and don't know how to reset it any suggestions

    I am unable to send or receive emails, when I go into settings I have forgotten my password but I don't know how I can change it, or is it the same password used for my appleID

    Thanks, someone else told me yahoo is an issue.  No, not the fan itself is what I'm asking, but the dots preceding it.  Sometimes there are 3 up, sometimes 4, sometimes 2.  Just wondered if they are the signal strength.  I should actually walk in different parts of the house and see if they change in different rooms.

  • Would like to know if these devices can be connected and used at the same t

    Hi
    I firstly need to apologise for being not that technically minded when it comes to soundcards and audio equipment. I have good ears and really appreciate high quality music. I have nearly $2000US of AV equipment that I want to connect to my sound card.
    In the past I have been unable to use any of the Creative Labs products (looking back a few years) as they did not have an SPDIF inerface. My old motherboard did, but has now being retired.
    ) I need to be able to connect my AV amp via the SPDIF connection and also a microphone using a normal headphone plug (no idea what you call that connection), and be able to use both at the same time. My old motherboard allowed this with ease, but it would appear that not all of the creative labs sound cards will!
    2) The SPDIF connection must be located at the back of the computer. Connecting it at the front of the machine will be unsightly and dangerous to have the lead lying around in my current situation
    3) The mic connection can be located at the front or the back of the computer. A connection at the rear of the computer would be preferred.
    May I ask what is the cheapest X-Fi soundcard in the range that will allow this. I don't believe that spending more money will by me better sound quality when it comes to playing movies and music over the SPDIF interface.
    I am not interested in any fancy features, or special game acceleration modes or enhancments. Just good quality music through an SPDIF connection, and the ability to use a mic to talk to ppl online.
    From my research it would appear the cheapest option is the (expensi've) Sound Blaster X-Fi Platinum
    Many thanks for any assitance you are able to offer.
    3)

    That's like the 00-th post that asks for the same thing: digital connection of the Creative soundcard to a receiver.
    Yes, you can connect the card via a jack situated on the back of the card - you just need a cable with stereo minijack and RCA. All the older Creative cards (since Li've!) have that SPDIF output on the back, on the form of a mini-jack. It is labeled as "digital".
    The ONLY problem is that you will be able to send surround sound via SPDIF only if it is encoded DD or DTS on a DVD-ROM. The card itself will not encode surround sound CREATED in the PC. So, games, mp3's, CD's all will be stereo PCM. I guess that your old MoBo SPDIF was in the same situation (except for a SoundStorm integrated from nVidia that does DD 5. encoding on the fly). If you don't care about gaming performance, Turtle Beach make a card that does DolbyDigital encoding on-the-fly - they are calling this Dolby Digital Li've.
    About mikes: one mike input is existing on the back of the card, and another one on the expansion bay (if you have platinum version). both of them will take only a el-cheapo (electret/condenser mike), not a proffesional one.
    Message Edited by SoNic2367 on 04-24-2006 2:47 PM

Maybe you are looking for

  • Pagecontent tag adding footer clear div - problem

    I am trying to figure out how to remove the div that the pagecontent tag adds to my website. As you can see here the dark gray box under the product is added by a div labeled footer clear. When I remove that div, the layout problem goes away. Problem

  • I can not use quick mask in my latest version of Adobe CC  Why Not?

    I cannot get Quick Mask in my latest updated version of Adobe Photoshop CC

  • HT2693 im experiencing error no. 1611, how do i fix this problem?

    i've connected my phone to my computer and it automatically updates my software to iOS 6.0 and this problem occurs. Can anyone help me solve this problem please, thank you!

  • Sequence values

    I have a sequence whose max value with the help of a trigger is inserted in a table column. I've noticed that sometimes the consecutive values of the sequence differ not by one but by variable number. I have Increment by 1 and Cache 20 in the sequenc

  • Opening .doc items on Mac starts Parallels 5

    I have just upgraded to Parallels 5 and now notice that, whenever I have cause to open a file with a '.doc' suffix (say an email attachment in Entourage, or from my own Documents files on my Desktop) Parallels starts up automatically. This never used