I have an old imac 27' with OS 10.7. What will happen with lightroom 6 ?

I have an old imac 27 ' with mac os 10.7.
I try creative cloud and lightroom 5. It works perfectly... But what will happen with lightroom 6 ?

It's pretty simple. Lightroom 6 will not run on OS 10.7. See http://blogs.adobe.com/lightroomjournal/2015/01/update-on-os-support-for-next-version-of-l ightroom.html
You will need to either stay with Lightroom 5, or upgrade your operating system.

Similar Messages

If I buy a MacBook pro now, what will happen with it once the Lion OS makes it's appearance? Will I need to buy a new one again?

If I buy a MacBook pro now, what will happen with it once the Lion OS makes it's appearance? Will I need to buy a new one again?

Lion will run on most Intel machines. It will not run on the following machines:
MacBook Pro (sold before October 2006)
MacBook (sold before November 2006)
Mac Mini (sold before August 2007)
iMac (sold before September 2006)
It requires an Intel Core 2 Duo (or later CPU). Those machines listed above were all Intel Core Duo machines and with the exception of one of the Mac Minis, an Intel Core Solo. So we're talking 4+ year old machines. I have not tested Lion on a machine with anything less than 2GB of RAM.
Wikipedia has a pretty good public summation of what's known so far and it's quite accurate - http://en.wikipedia.org/wiki/Mac_OS_X_Lion
The biggest thing of note so far is that you cannot install/run Rosetta. Which maybe problematic for some users.

Testing Lightroom 5 - What will happen with my Lightroom 3 catalogue??

I am currently working with Lightroom 3. What will happen with my catalogue file(s) if I start the test of Lightroom 5? Is it possible to switch bak to Lightroom 3 after testing without restore of the "old" Lightroom 3 catalogue?

In short, Yes.
When you install and launch LR5 it will find your catalog(s) and when it tries to open them it will promt you to approve conversion from 3 to 5.
This will duplicate your catalog (not the assets) and leave your version 3 catalogs untouched.
If you want to return to a version 3 catalog for some reason then you will simply open it with LR3 which will remain on your machine.
Note that the newer features will not be available or readable by the version 3 catalogs. So if you make changes to a raw file using new tools those changes will not show when viewing the file in LR3 catalogs.
To properly "test" LR5 for your purposes I recommend you catalog new files and not the existing ones you have until you are comfortable with LR5. When you are comfortable, then upgrade your current catalogs.

Migration Planning: What will happen with clients when changing namespace?

Hello,
We are planning to upgrade our EX2010 enviroment to EX2013.
Sadly our namespace in EX2010 is right now owa2.domain.com. The name owa2 is coming from last migration between ex2003 and ex2010. I'd like to remove this minor flaw if possible.
But what will happen with all the clients and mobile devices which are right now bound to owa2.domain.com? Is it possible to change the name back to owa.domain.com without manual interaction with the clients?
Kind Regards

Hi ,
Based on my knowledge for services like pop,imap and active sync we need to have the manual interaction.Without manual intercation we cannot achieve this.
Same time we need to have the new name on the SAN certificate .
For owa users you can simply communicate the new url via email and then for internal outlook and external outlook connectivity we need to repair the profiles to force the autodiscover service to fetch up the new name.On my experience most of the times repair
will not help.So again your only hope would be reconfiguring the existing profiles.
Note : Most importantly before renaming the host A record on the external and internal dns all you need is to reduce the TTL value for the existing host A record on the name owa2.domain.com.So
that external and internal clients will not have the dns cache for a long period.
Anyhow we will wait for some expert inputs on this case.Because their ideas might be good and different than me.
Thanks & Regards S.Nithyanandham

Dispite I downloaded app video calling for facebook from appStore, my safari on my MacBook don't work, instead app wants to change browser. If I do this (changing user-agent) what will happen with my safari???

Dispite I downloaded app video calling for facebook from appStore, my safari on my MacBook don't work, instead app wants to change browser. If I do this (changing user-agent) what will happen with my safari??? I have new (updated 10.7.1) OSX, Lion !!!
Kind regards!
Petar

Dispite I downloaded app video calling for facebook from appStore, my safari on my MacBook don't work, instead app wants to change browser. If I do this (changing user-agent) what will happen with my safari??? I have new (updated 10.7.1) OSX, Lion !!!
Kind regards!
Petar

What will happen with the code?

What will happen with the code below?
for (i=0; i<=10000; i++)
Object[] obj = new Object[5];
In every loop, a new Array of Object wll be created. Will the Array of Object created in the
current loop( for example, i=2001), eliminate the Array of Object created in previous loop
(for example, i=2000 or 1999)? How the memory is allocated in every loop?
Thanks.

Each time through the loop, an array of five Object references is created. A reference to this array is assigned to the reference variable obj, causing the previously allocated array to be unreachable (except the first time through the loop, if obj was originally null). The garbage collector will collect these unreachable arrays if the memory gets low.

I plan on reformatting my computer, what will happen with my ipod?

I plan on reformatting my computer and was wondering what will happen with my ipod, will i hafto restore all of its songs and since ive saved the ipod and named it and everything will i hafto go through that proccess again? please explain?

Hi,
Please make sure that you should copy all the music back to your iTunes before you do the Syc with your iPod. Please read the following post
http://discussions.apple.com/thread.jspa?threadID=250220&tstart=30

If I reinstall my computer what will happen with itunes

I am going to buy a new hard disc for my computer anb I amb going to teinstall the operating system, what will happen with the itunes cionnection?

I do not understand yur question. Please provide more information.

What will happen with my installed softwares?

Hi I am using MacBook Pro with C2D and having latest version of SL. But I have installed lots of software useful for my business including virtual machine and I am using Windows 7 ultimate on it. So I am wondering what will happen if I upgrade this to Lion? Do I need to install everything again or it will be as it is like on my snow leopard?

I don't know about VMware, but I can tell you that when I opened Windows XP the first time in Parallels after upgrading to Lion, I had to re-setup the virtual machine. Other than this, no problems. CS3 and older WILL NOT run in Lion, but CS4 and newer run without problems.
Go to About this Mac > applications, and here you can see which of your applications are PowerPC, thus not compatible with Lion.
Cheers

Rescue and Recovery with only one partition, what will happen? Thanks!

Hello, everyone! This is my question: If I do a clean installing of Windows 7 with only one partition(the C and I install the Rescue and Recovery tool, when I make a backup of the system by using the Rescue and Recovery then the backup file will be stored in the partition C:. So when I restore the system with the backup file later, if I can succeed and what will happen? Thanks.
Solved!
Go to Solution.

Backups and restores will still work. The risk is if something happens to your hard drive, then you would lose the backups as well. For this reason it's a much better idea to store your backups somewhere else, such as USB hard drive or network.

What will happen with the richer functionalities of Deski if Webi replaces?

Hello,
I have been told that Webi will replace Deski because Deski is not supported anymore. for that we developed a lot of new reports in Webi and we encourage our customers to do the same. When our customers try this new tool out (Webi) they miss a lot of the functionality they had with Deski and are not willing to change. For instance in Deski the graphics possibilities are much bigger if you want to combine more datasources on one graph. Or also the grouping functionality when inserting a new variable is also missing. For the first example we could say that this can be solved by Crystal reports and for the other you can link excel files to your webi but these are workarounds for our customers and they want added functionality in the Webi tool of course. Is this planned or are there other means that I don't know of to solve those questions in Webi?
thanks for your answer.
Thierry renaer

Thierry,
Jvmauricio's reply is spot on (both are reporting tools of their own, you should only know what to use when).
One item you mentioned:
the grouping functionality when inserting a new variable is also missing
has a different syntax, however, the results are the same. Here is an example:
You have a data set with various ages and a metric. You would like to group the ages into a group and summarize. Your report variable is called AGE, so here goes to get Ages 0-3, 4-8, and 9 and above:
=if([AGE] between (0;3);"Ages 0-3";if([AGE] between (4;8);"Ages 4-8";"9 and above"))
So, you use the "if function" and the example above uses the nested-if type of construct. I've never used DeskI, so I have a poor reference point on ease or difficulty over one tool or another. From an administrative point of view, if you can get users up and running quickly over the web using a java-enabled browser versus loading a software package then I think it is a step forward. Also, the web-enabled version, providing the correct security is in-place, permits a user to develop/run reports any where an Internet connection is available, but not so with DeskI. One of your stragegies might be to identify like capabilities between the two tools, then show your users the "new way", like group or if, etc, etc.-- Just my two cents worth.
Thanks,
John

What will happen with matched songs if you cancel your iTunes Match subscription

Does anyone here know what would happen to your nonpurchaced songs if you let your iTunes Match subscription expire? Will they be removed?

Hi CLaCour,
I think the answer to your (and my) question can be found under 'a few iTunes Match questions'.
bigturnip said once you download the matches that were made, they are yours. You pay for imatch and for that you can choose to use them and download to device or Mac. Once this is done, it becomes yours. You dont have to use the matches that are made. He also explains about what is used in the storage. It the uploaded (unmatched) song whitch uses up the free storage from icload

I have an old Ipod which I loaded music many years ago. . .I no longer have the itunes which I originally loaded, however, I have a new itune account with songs loaded. . what will happen if I load these songs onto my ipod today?

I have an older ipod which many years ago I loaded my music from Itunes on another computer. . .that computer crashed. . .I now have a new Itunes account and music loaded on another computer. . I would like to add songs onto my ipod. . .can this be done?

Not without erasing what is currently on the iPod first, since an iPod can only be synced with one computer/iTunes library at a time.
A better way to go about it, is to copy everything currently on the iPod to your new iTunes library first. Then connect it to iTunes and either choose the Erase and Sync option or restore the device to allow it to start syncing with the new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

What will happen with Authorware when XP is gone, will it work with Window's 7?

I have one computer with Window's Vista 64 bit and one with Windows XP. I understand Microsoft is not going to be doing updates for XP starting this year. Will Authorware work on another operating system like Window's 7? Can you run a Window's 7 64 bit system in 32 bit mode?

I've run Authorware on my Win 7 64bit laptop without any problems. I haven't had an opportunity to work on a big project so there may be issues I haven't run across. There is at least on issue that I know of that's out in the wild and remains unresolved. Something about WMV movies and the windows media driver that handles these movies through the movie icon. I believe the solution is to use the ActiveX or convert the movies to FLV and play them through the ActiveX flash player.
Mike

Sharing pages app with friend... what will happen

I am sharing my app pages and iMovie with my friend who is also using mac.
Will it work on his system. or will it cause any effect to my application (pages and iMovie)

As you haven't given us any details as to what your friend and you are using, how would we know?
Peter

I have an old imac 27' with OS 10.7. What will happen with lightroom 6 ?

Similar Messages

Maybe you are looking for