I have an old macbook that I'm trying to get photos off of. When I save them on an external hard drive to move them over, my new macbook can't read the files.
I am thinking about buying iPhoto 9.5.1, but I'm wondering if that will replace my old photo library completely? Will I lose my photos and will I be able to convert them to my newer macbook pro? Thank you for your help!
It will not replace your Library. It will need to be updated to run with the newer version, which iPhoto will do automatically when you run it first time. Thereafter you continue to use iPhoto as always.
Of course, before updating anything on a computer back up first
Similar Messages
-
My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya! -
I have my iTunes music folder stored on an external hard drive. I recently purchases a new Mac. After attaching the external hard drive, all songs imported without a problem except my playlists. Any clue about where they are or how to revive them for use on my new Mac?
Thanks!Rysz wrote:
To retain your playlists, artwork, play counts, etc, you need to move the entire iTunes folder, not just the music files..
Correct.
After that just select the new folder location in iTunes> Advanced settings.
Incorrect.
Hold Option and launch iTunes.
Select Choose library and select the iTunes folder.
This will read the iTunes library.itl file in this folder and the library as it was previously will be opened. -
Can you transfer the albums from the iPod to iTunes on the computer while sync the two without loosing what is loaded on the iPod?
Content purchased from iTunes can be redownloaded.
Content acquired from other sources will need to be reloaded from those sources, iDevices are NOT backup devices.
The simplest solution, restore all the media from the backup of the old computer. -
Please help me find a solution to my new MacBook Pro not recognizing my hard drives. Yes, thats two hard drives I have that don't seem to work on this computer but both work on my older MacBook and many other computers.
It is formatted for both PC and Mac
I have tried finding it in Disk Utility, no dice...
Tried both USB Ports
And a reboot is still unsuccessful.. -
i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard driveWelcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org -
I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks
If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.
-
because my macbook went to sleep, my hard disk is full. What happened? Where can I find the file i need to erase
It's hard to tell -- just going to sleep shouldn't have caused a problem. Something else may be going on.
See Where did my Disk Space go? especially the blue box. -
Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4. I have downloaded Raw file plug-in v 6.7.1 but still can't read the files?
Read this table http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The Olympus Stylus 1 was first supported in Camera Raw 8.3 which is only compatible with CS6 and CC.
It is not compatible with CS5 or older and never will be.
If you do not want to upgrade to CS6 or CC then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNGs then edit the DNGs in CS5.
Camera raw, DNG | Adobe Photoshop CC -
Hi Everyone. I have an old Mac Book with software updated to 10.6.8. I have saved a ton of emails in my inbox 'On My Mac'. There are so many it is slowing down my computer. Where do I find the folder with all the emails so I can cut and paste them to an external hard drive? Pls.help. Tks.
Depending on which email client software you use
the files should be in 'your home folder' library, esp.
if you use Mail application.... ~/Library/Mail
Since you don't specify what mail application,
that would most be associated with the file.
I notice there are some items to the right of your post
where it says "more like this' so that may be worth a
look to see if similar issues were answered. Also, the
Help viewer in your system is a searchable database.
Seems that google also brings up fair information, too.
Do you have a complete bootable clone of your entire
Mac system on an externally enclosed hard disk drive?
Good luck & happy computing! -
I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!
Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!
-
I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?
You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv. -
can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
My Western Digital external hard drive suddenly stopped showing up on my macbook pro and it disappeared from disk utility. I have tried making invisible files visible but nothing has worked and my hard drive shows up on a PC but not my Mac anymore.
What is the manufacturer of the external and how old is it? Does it have its own AC power supply or is it USB bus powered?
-
I am trying to save a doc. to a external hard drive and it wont allow me. I says its read only, any ideas on how to correct it?
Save it on the internal HD then copy it from this safe location to the external device.
iWork applications can't apply their save process on devices which aren't formatted as HFS+.
But it may also be that for some reason, an external device formatted as HFS+ is set to Read Only.
If it's this case, you will have to change de setting before moving the file on it.
Yvan KOENIG (VALLAURIS, France) vendredi 20 mai 2011 11:01:05
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
Maybe you are looking for
-
Could not determine BW release of logical system 'BWPCLNT100
after a BI systemcopy (production to development) we get the following error when we run load jobs of type "delta load". full loads work fine "Could not determine BW release of logical system 'BWPCLNT100'" even if i start the deltaload from the R/3 s
-
IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2
Hi, I have configure allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of
-
Has anyone run into an issue with their hotmail account being hacked on ios 6 ?
Im noticing that I am getting strange MALIER DEAMON emailsadvising me that my email to whomever could not be sent.I have preiously run into this issue and it turned out my yahoo account had been hacked when I began getting those messages. Has this ha
-
Value based billing plans?
Hi... I am ABAPer, I am trying to create value based billing plan in the contrcat creattion.. But if i enter date and bill value and press enter billvalue which entered is not mapping there, As of now there is no items for this contract, How can i en
-
Keine Sprachanalyse in Adobe Premiere Pro CS5
Hallo @ll, ein neues Problem mit der Sprachanalyse in Adobe Premiere Pro CS5. Da ich gerade einen Workshop durcharbeite und laut dem Workshopbuch eine Sprachanalyse einer WAV-Datei ausprobieren wollte, habe ich festgestellt das Adobe Premiere Pro CS5