I have an older HDTV with only 1 HDMI connection. I use a Bose 3.2.1. GS Series II system and have a HDTV cable box. Bose system has no HDMI. How can I connect an Apple TV to this system?
I have an older flat panel HDTV with only 1 HDMI connection which is being used through my cable box for TV reception. I also use a Bose 3.2.1. GS Series II home theatre system. It has no HDMI inputs. Can I use an Apple TV with my present system? I'd prefer not hearing, "buy a new flat panel."
Cliff
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Similar Messages
-
Why would my Apple TV suddenly stop recognizing my library. Nothing has changed. How can I test the Apple TV. I have the latest updates.
Could have to do with home sharing. Try turining off and then back on home sharing on your AppleTV.
-
How can i link my apple id to this computer
How can I change the Apple ID setup on my computer. I bought a used computer and the other person's ID is there for updates and it wont let me change it
The seller didn't properly prepare the computer for sale. You can do so by following the instructions here -> http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/.
After you've prepped your new machine, you should be able to set it up with your Apple ID and you need no longer will need to try to use the seller's Apple ID.
Good luck,
Clinton -
I have Adobe Reader XI. All my files have a picture on the first page. I used to be able to see that picture but now I can only see the PDF logo. How can I change that so I can see the pictures instead of the logo?
Windows 7
-
I just realized that there are some apps I no longer have access to since the switch to iOS 5. So I followed the instructions, and there is no SOFTWARE UPDATE tab for me to click on under Settings-General.
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 5/6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I have reinstalled itunes to my computer. I have signed in with my user name and password but I am unable to access the music I have already purchased. Could someone help me find my music so it shows in this version of itunes please? Thank you.
Use your backup copy of your computer ot put everything back.
If for some reason you have failed to backup, then:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi everyone,
I have an Ipod touch 3rd generation. I tried recently to update its software and everything disappeared (the setting, my music etc) WHat can I do?
HLévesqueWithout knowing current status of the iPod:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA inputWelcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC.. -
Plz I need help in how can I connect my iPad the new one (4G) to the iTunes while I don't have pc
Use a neighbors or something. You can use any computer to update and restore it. Once it's to the startup screen your good to go. Yes the apple store can help you too.
-
I have only one HDMIport wich is occupied, how can I connect Apple tv
Hello,
I have a Loewe tv with only one HDMIport. This port is occupied for digital TV. How can I connect Apple TV. I saw that the former Apple tv had Component ports, but the new one does not.
Help please.You might consider getting yourself a HDMI switch.
-
I have an older ipod classic 80gb that I've just reset and associated with my iTunes account. It's recognized and up to date but when I sync I can't download any of my music. How can I download my iTunes library to this device?
Hello Analogue guy living in wireless world,
Thank you for providing the details of the issue you are experiencing when trying to sync your music to your iPod.
I recommend trying to sync your music again using iTunes. When you have your iPhone connected to iTunes, I recommend checking the Music tab to verify that Sync Music is checked. From here, you will be able to select to sync your "Entire music library" or "Selected playlists, artists, albums, and genres:"
I recommend reviewing the full article here:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
Thank you for using Apple Support Communities.
Best,
Sheila M. -
How can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port
I have ask this question in the local shop but they could not answer me - how can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port
I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
Thanks. -
How to connect Apple TV (2g) HDMI to HDTV with only component video input.
Trying to connect Apple TV (2g) HDMI to HDTV with only component video input. Can I use a simple cable or do I need a converter box/plug? Is the HDMI signal coming from ATV encrypted or HDCP enabled?
The TV is HD, but only has a component input and not HDMI. Apple TV 2g only has HDMI output.google component hdmi converter
but they are pretty expensive and may not work at all
and will not work with any DRM material as in movies you reant and maybe netflix and the sports thingy -
How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
Thanks for any help! RegardsHi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards -
I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?
http://support.apple.com/kb/ts1538
Maybe you are looking for
-
Printing problem with Photosmart 5514!!
I have a Photosmart 5514 and have just started using it, and I've probably done something wrong as a beginner and I need help to fix the problem. How do I delete a print jobs waiting to be executed? I do not know why there is a print job in the queue
-
How to get start with FI module(functional)
Hello, I want to know how to start with functionally on FI module
-
Ibook won't boot up on own or from OS installation CD (need help in Yemen)
Hello, I'm currently in Yemen for a few months and my ibook seems to have died on me. The country isn't exactly brimming with Apple support technicians so any advice or suggestions people could give me would be really appreciated. I have an older ibo
-
Problems with MSVCRT10.DLL & VersionCue.DLL
Hi all 1) Operating system: PC Windows 7 Professional 2) Software: Adobe Creative Suite CS4 3) Illustrator CS4 stop working: "The specific module could not be found: Adobe/Adobe VersionCue CS4\Client\4.0.0\VersionCue.DLL 4) I have checked and downloa
-
Question: EPMContextmember Function shows description instead of ID?
Hello, I try to use EPMcontextmember function to make user click to select the Entity member, but I got a question here: epmmembercontext only shows the member ID, NOT the description. Is there any any solution to make EPMcontextmember can display th