I have an older I pod nano I cannot connect to my I Pad 2 due to no usb port on the I Pad 2.  I purchased an adapter but the usb port will not work.  Any suggestions?

I purchased an I pad 2.  I have an older I pod nano the cord is not compatible with the I Pad2 any suggestions?

You can't connect an iPod to an iPad for syncing content between the two - if you want to have the same content on both then you will need to go via your computer's iTunes.

Similar Messages

  • Unable to download the trail version of Photoshop CC.it says retry! however, the retry option is not working.any suggestion?

    unable to download the trail version of Photoshop CC.it says retry! however, the retry option is not working.any suggestion?

    Urban baul for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  • I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

    I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • My 4th generation ipod touch will not power off and the volume buttons do not work, any suggestions?

    My ipod's power off and volume buttons are not working. It's as if the volume down button is constantly being pressed. Both buttons "work" as far as I can press them in, but there is no response from the ipod. Any suggestions? I have updated the software, but that did not help.
    Thank you!

    I have the exact same problem!!
    please let me know if you have found a fix / soution
    email me at [email protected] or just reply, any help would be great
    thanks.

  • Iv'e upgraded my iMac to 10.6.8 and now microsoft office 2004 and my canon powershot camera software will not work. any suggestions?

    I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8). The software for the Canon Powershot is Ver.37.2. Image browser 6.2 EOS utility 1.1.  Any help would be appreciated.
    Also if you could tell me what happens to the individual jpegs that get imported through iPhoto, I would go back to using that instead of the Canon software. I want to be able to go into a folder and see all the jpegs and not have to rely on iPhoto's one enormous file. What happens if that iPhoto file gets corrupt? Thanks, Leesha

    Leesha wrote:
    I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8).
    Actually, Microsoft Office 2004 works fine with Snow Lepoard OS 10.6.x. However, it does require Rosetta, Apple's app for Classic apps. In your upgrade from Lepoard 10.5.8, Rosetta may not have installed but you can manually install it with the instructions here.
    On another note, when upgrading the OS, some anomalies get resolved by repairing disk permissions with Disk Utility in the Utilities folder.
    One more note, there was an issue with Rosetta crashing with OS 10.6.8 in February 2012. Apple released a security update that fixed it. You can see if Software Update (launch from the Apple menu) shows it or manually download Security Update 2012-001 v1.1 and install it. Software Update will also show other applicable apps available for updating for your upgraded system.
    Rosetta is no longer available with OS 10.7 Lion and beyond. Then you will need to upgrade MS Office 2011 for Mac.
    HTH

  • Just installed new Time Capsule now my airport express range extender will not work any suggestions

    Just replaced my Time capsule that died with a new one now my airport express range extender won't work.  Any sugesstions?

    Thank you William, I reconfigured the Airport Express and it works perfectly.  Sorry I did not get back to you sooner but I came down with a bad cold.
    Thank You, and Merry Christmas and a Happy New Year.
    raiderron

  • I have a 5 month old Magic Mouse and I want to replace the batteries for the first time but the battery door will not release any suggestions?

    The battery compartment door on my Magic Mouse appears to be jammed shut and will not open, the device is only 5 months old and this is the first time I have needed to open it to change the batteries. Are there any suggestions?

    It could be you are approaching it incorrectly.   It can be a tricky little gadget that actually works with minimal pressure.
    Try turning over the mouse so the compartment panel faces you, optical sensor topmost.  Then holding the mouse at each side but not on the panel itself, flick the small, black rectangular panel downwards.   The top of the panel should spring out, though it may require you to manipulate it fully away from the mouse.
    Once you have replaced the batteries, starting at the bottom reverse the procedure then clip into place.   Remember to move the small switch next to the optical sensor upwards which should turn on the green light.   Then click twice to connect.

  • HT201412 I dropped my phone and the camera shutter will not open- any suggestions? Thank you!!

    I dropped my iPhone and the camera app no longer works.  The shutter will not open, however I am able to take front facing punctures when using the Camera360 app.
    Any suggestions would really be appreciated!

    Well if the basics (restart, reset, restore from backup, restore as new) don't work, then you've broken your phone.  Bring your phone and $199 to Apple for an out of warranty replacement.

  • I have iphone 4S. when i make personal hotspot and say a device is connected, blue bar at top shows status of connection. in this situation if i want to find contact through direcctory, the search option is not work. anybody suggest how to resolve it ..?

    while on personal hotspot, searching a contact is not work. can anybody has solution ..

    Complain to the Attorney General about what? There is nothing in your story worth any such complaint. They will tell you the same.
    First you have payment difficulty so credit and the Edge program are not available to you. You have to be credit worthy to get any upgrade, unless you can pay full price for all those new devices.
    Can you?
    You are trying to get new contract plans, but since you are having paying on time and in full issues you will not get extended credit from any carrier.
    What I would do is go and port out to Boost or Virgin Mobile where you pay a reduced cost for each device and get unlimited everything for $40 to $50 a month, it is pre pay so if you don't pay you get cut off.
    Verizon although with the best coverage is also the highest priced.
    Good Luck

  • One ipadmini will connect to WiFi but an identical one will not.  Any suggestions?

    Of 2 identical ipadminis, one will connect to the WiFi network but the other one receives the error message: Unable to join the network "XXXX".  Any suggestions?

    Hi thekps. Sorry to hear about your problem. Usually when an iPad can't connect to WiFi, it is usually the WiFi/Modems fault. I'm not saying its broken as such. There are many occurrences to your problem.
    You are to far from the modem
    You are typing in the wrong network key in
    There are too many devices attached to the modem
    Here's a little trick that I like to use:
    Go to Settings and click on WiFi. Press Other. Type in your SSID/ Network Name. Select your modems security type. If you dont know this, youll have to guess a lot. Then type in your password. If that doesn't work let me know!

  • My home button is stuck and will not work any ideas?

    My Ipod home button is stuck and will not work, any suggestions??

    See:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    If you have iOS 5 you can go to Settings>General>Accessibility and turn on Assistive Touch. It adds software buttons to the screen.

  • My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

    My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

    I'd start by looking in system profiler.
    the blue Apple icon > About this Mac > More info...
    goto the hardware section. Scroll down and click on  USB
    See what happens when you have the device plugged in & not plugged in.
    Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse.  Keyboard usb ports are rather low power.
    Perhaps device is taking too much power.  Are devices power or unpowered?  Try connecting devices to a usb hub.
    Which mac do you have?
    What iMac do you have?
    Report system info
    Blue apple > about this Mac
    click on more info
    click on hardware
    do not copy your serial number

  • After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

    after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will  not play, any suggestions?

    I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will  not play, any suggestions?

    Hello there, tomazdes.
    The following Knowledge Base article written for the USB SuperDrive, offers some practical steps to try when issues present themselves with particular content playback (feel free to skip Step 3 when working with an iMac or MacBook with built-in drives):
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Particularly:
    Accepts discs but they don't mount or are automatically ejected
    Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
    Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
    Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
    Reset the System Management Controller (SMC).
    Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
    OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
    OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
    If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad one.

    My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .

    Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
    If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for