I have an older IMAC mid 2007 intel core. I want to transfer my backup files from an older Maxtor drive to a new one. My old drive is not support by Yosemite. Can I transfer the files to a new supported drive?
I have an older IMAC mid 2007 intel core. I want to transfer my backup files from an older Maxtor One Touch drive to a new one. My old drive is not support by Yosemite. Can I transfer the files to a new supported drive? I haven't bought a new one yet. Any suggestions as to which new one to purchase?
See if you can get the drive to mount. See mount section of 1st link.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk
Similar Messages
-
I can't see my files on my USB shared drive. It shows there is lots of space taken up, but I can't access the files via my Mac. How do I see them? I also can't see them on my iPad using FileBrowser.
You don't have access to it to configure it via Time Machine? You lost me on that one, Time Machine is used for Backup.
Here is a basic article on the first setup and what you should see:
http://support.apple.com/kb/HT1178
To configure Time Capsule you should be using "Airport Utility" 5.3 or higher that is located in the Utilities folder. You can tell if its version 5.3 because the icon will have blue lines instead of orange lines like the older versions. Since you are running Leopard 10.5.6 and you ran Software Update you are probably already running the latest 5.3 version.
The light flashing amber means you haven't entered enough information so that it can get to the internet. Once you have that info entered the light will turn green.
If your absolutely sure your CAT5 cables are good you can try a hard reset. I think you have to push the reset button on the back and hold it for 5 seconds or so until the amber light blinks rapidly, then when you release the button it does the reset then.
http://support.apple.com/kb/HT1300?locale=en_US
Hope this helps! If not I would probably call AppleCare support or see if you can exchange it.
-Dan -
All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.
They work just fine. whatever issues you have are specific, but without proper system info, browser info and other details nobody can even begin to guess.
Mylenium -
I can't download mountain lion, I get the following message "could not complete your purchase, can't verify the file, it may be damaged or unsigned" ? what do i have to do ?
The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.
Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information. -
I just updated to iOS7 and an old appleid popped up. My old password is not recognized so I can't delete the account or turn off find my iphone. The old appleid is linked to an email I don't have anymore, and answers to my security ?'s aren't recognized. Is there any way I can reset my account to my new appleid? This has happened to every iphone and ipad in my family that has updated to iOS7.
Hi mabaker2,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
Cheers,
- Judy -
How can I unlock the copy protection of songs that I've acquired some years ago with an old - and non existing anymore - account? Can I link the songs to my new account or do I have to purchase them again?
If you're in the US, you will be able to use iTunes Match for $25 a year to remove copy protection in a few months: http://www.apple.com/icloud/features/
If you're not, you can't. You can authorise iTunes with the old account in addition to your current account, so all your songs will play, but I'm not sure what will happen if you try to sync them to an iPod. -
I changed the hard drive in my mid 2007 Intel Imac. I'm trying to re-install the the op system. I'm receiving a message stating that "Mac OS X cannot be installed on this computer." I am a "newbe" to Mac's. Can someone help? Please be gentle. I raeally am a novice. Thanks in advance
I believe these are the wrong system restore discs for your model iMac, assuming your are correct that you have mid 2007 iMac.
These gray colored type restore discs are Mac-machine specific and are the wrong ones for your iMac.
They will not work.
The original OS X restore discs for your model iMac would either install OS X 10.4.11 Tiger or OS X 10.5 Leopard.
You have gray system restore discs for a later model iMac. These will not work with iMac year and model.
Sorry.
You need to purchase a full retail version of OS X 10.6.3 Snow Leopard here instead.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
These discs will work with your year and model iMac.
Assuming that your hard drive was installed properly, these white retail OS X install discs should be able to boot, format and install OS X 10.6 Snow Leopard to your 2007 iMac.
Good Luck! -
Keep getting error not vaild pdf how can i open the file
Error msg says not a valid PDFhow can iI open
Hi,
Would it be possible for you to share the problematic pdf with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team -
I get multiple windows opening with this message. Sometimes as many as 8 or more. I first tried clearing my cache then I uninstalled Firefox and reinstalled it but the issue persists.
I am using Trend Micro anti virus software with their latest updates and have run a complete scan. The program tells me I do not have a virus but I suspect I do. Can anyone give me any input on this?
Thanks.Do a malware check with some malware scan programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
Need help I can't figure this one out
The iPad cannot send SMS, only iMessage. If you attempt to send a message from your iPad to someone who does not have iMessage, you'll get that error message.
-
HT4796 I can't find the files after complete!! help
Hi, I followed the directions several times to transfer my PC files to my new MackBook Pro....says complete...but I can't find the files...any idea what I did wrong? Thanks!
Check your user accounts to see if Windows created a new one. I've read it does when migrating. Check for the files in that account, if it did create a new one.
-
Iweb - Publish error - can't create the file "..."
Hey guys,
I've seen this issue in a couple of discussions but nothing helps. When I try to publish my site I'm getting the following error note:
"Publish error. Can't create the file "...png". The disk may be damaged or full, or you may not have sufficient access privileges."
Same result whether I publish to an ftp or to a local folder.
My disk is far from full and the site is merely a few megas heavy.
The content is just text and a few photos.
I have OS version 10.6.8 and Iweb 3.0.4.
No passwords involved.
I've tried all the tricks in the book:
Duplicating the page that won't publish.
Re-creating the page that won't publish.
Deleting com.apple.iweb.plist from home/library/preferences
Moving my site domain to another location, creating a new site and then putting the old one back
Deleting cache from libray/caches/com.apple.iweb
I re-installed Ilife
Reboots
Banging head repeatedly again wall
Any idea what could be causing this and how to fix it?
PleymoTry the following:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT -
Mac mini 2007 Intel Core Dou Intall problem
I have an Apple Mac mini (2007, Intel Core Duo), with Mac OS X Leopard (10.5). I installed this software via the original installer DVD, but i could intall combo update (it downloaded it, and after restarting it stops on the blue screen with the blue loading line [but it didnt load], it tried to install allnight long), and Snow Leopard (10.6) also.
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version: 1.19f2
HD: 80 GBYou have enough memory for Snow Leopard:
https://discussions.apple.com/docs/DOC-2455
And if you want to install Lion, first read this tip:
https://discussions.apple.com/docs/DOC-6271
Then:
https://discussions.apple.com/docs/DOC-2465
Unfortunately your Mac Mini is too old for 10.8 or later. -
I have a 24-inch Mid 2007 iMac. Should I upgrade to Yosemite?
I have a 24-inch Mid 2007 iMac. Should I upgrade to Yosemite? I was advised by genius bar that it would slow down my iMac.
According to sources such as http://mactracker.ca download database specs for
the iMac (24-inch Mid 2007) your computer can use more RAM than it has now.
Maximum Memory: 6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots: 2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
•iMac: How to remove or install memory
And so it should work better even if you stay with Mountain Lion OS X 10.8.5.
The hardware upgrade will help the Mac OS + applications, in basic functions.
[This computer is already considered 'vintage' by Apple...]
Depending on the amount of use the computer has seen so far, it may also be
a candidate for a replacement hard disk drive; perhaps a larger capacity, too.
If you consider an upgrade, also consider a complete backup and a bootable
clone of the current (if updated to 10.8.5 with its applications updated) OS X
on an externally enclosed hard disk drive with its own power supply. You can
see a few of these that do not run on Mac port power, & standalone, at OWC.
{The company known as OWC is macsales.com, a fair example of mac-centric
supplier of quality products for Mac community, awhile. Or so people tell me.}
Clone utilities such as superduper, carboncopy cloner, or disk utility can work.
Test a cloned OS X copy for boot-ability and other function before moving on.
Could be you'd be better off with this computer on Mt Lion than a later OS X.
And a newer later computer should also have hardware specs and some up-
ward expandability for use with the expected new & future changes to OS X.
Hopefully you can get some fair use and more years from your iMac 24".
And that means hope for the best, and plan for the worst. Backup, backup...
Good luck & happy computing!
Maybe you are looking for
-
Is there a way to use a single bitmapdata for multiple images with GPU mode?
With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData? I have an app that runs in GPU mode - but I want to optimize the i
-
Change in Sales Order Qty in a MTO scenario
Hi, We had confirmed 5 Qty for the Production Order created with reference to Sales ORder(MTO scenario), now after confirmation of 5 qty, sales order qty is reduced to 3., then in this situation, what we need to do for the already confirmed extra Qua
-
Can't open more than 150 files in camera raw?
I have been trying to open multiple files from the bridge into the raw program for cs3...but if I try for more than 150 or so at once, it tells me the request can not be completed because too many files were selected for opening? I was able to open h
-
I accidentally press Off the Backlight in my 3red generation iPod Nano, how can I turn it On again? Appreciate any help. Thanks.
-
Why won't it complete my payment method
Won't let me finish my payment method